Introduction
This manual provides essential information for the proper use and care of your onerbl USB Cable. This cable is specifically designed as a replacement charging cable for OXILAM Y1, Y2, 4000A, and 6000A peak car battery jumper starters. It delivers a stable 5V DC power supply for charging compatible devices.
Please read this manual thoroughly before using the product to ensure safe and efficient operation.
Setup
Follow these steps to properly connect your USB charging cable to your OXILAM car battery jumper starter.
- Identify the USB-C Port: Locate the USB-C input port on your OXILAM Y1, Y2, 4000A, or 6000A car battery jumper starter. This port is typically labeled for charging input.
- Connect the Cable: Insert the USB-C end of the onerbl cable firmly into the USB-C input port of your OXILAM jumper starter.
- Connect to Power Source: Insert the USB-A end of the onerbl cable into a compatible 5V USB power adapter (not included) or a USB port on a computer or wall charger. Ensure the power source provides at least 2A (2000mA) for optimal charging.
- Verify Charging: Once connected, your OXILAM jumper starter should indicate that it is charging, usually via an LED indicator or screen display.
Image: The onerbl USB cable, featuring a USB-A connector on one end and a USB-C connector on the other, ready for connection to a power adapter and a compatible device.
Operating Instructions
This cable functions as a power supply cord for charging your compatible OXILAM car battery jumper starter. It is not designed for data transfer.
- Charging: Use the cable to charge your OXILAM Y1, Y2, 4000A, or 6000A jumper starter from any standard 5V USB power source.
- Power Requirements: Ensure your power adapter provides 5V DC at 2A (2000mA) for efficient charging. Using a lower amperage power source may result in slower charging times.
- Safety: Always ensure the cable is free from damage before use. Do not use the cable if it appears frayed or damaged.
Maintenance
Proper maintenance will extend the life of your USB cable.
- Cleaning: Wipe the cable with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent internal wire damage.
- Inspection: Periodically inspect the cable and connectors for any signs of wear, cuts, or damage. Discontinue use if any damage is observed.
Troubleshooting
If you encounter issues, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging | Loose connection | Ensure both ends of the cable are securely plugged into the device and the power source. |
| Device not charging | Faulty power source | Try a different USB power adapter or USB port. |
| Device not charging | Damaged cable | Inspect the cable for visible damage. If damaged, replace the cable. |
| Slow charging | Low power output from source | Use a 5V/2A (2000mA) USB power adapter for optimal charging speed. |
Specifications
Key technical specifications for the onerbl USB Cable.
| Feature | Detail |
|---|---|
| Brand | onerbl |
| Connector Type | USB-A to USB-C |
| Cable Type | USB Charging Cable |
| Compatible Devices | OXILAM Y1, Y2, 4000A, 6000A Peak Car Battery Jumper Starter Portable DC5V 2A 5VDC 2000mA 5.0V 2.0A |
| Special Feature | Fast Charging (with compatible adapter) |
| Color | Black |
| Connector Gender | Male-to-Male |
| Manufacturer | Shenzhen Waweis Technology Co., Ltd |
| ASIN | B0DNZ3FM8M |
| Date First Available | November 25, 2024 |
Warranty Information
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the packaging or contact the seller for specific warranty terms and duration. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear.
Customer Support
For technical assistance, troubleshooting, or warranty claims, please contact the seller or manufacturer directly. Contact information can typically be found on the product packaging or the point of purchase. Please have your product model and purchase date available when contacting support.