BLOKEES Transformers Defender Version 1 Mini Model DIY Kit User Manual

1. Introduction

This manual provides instructions for assembling and maintaining your BLOKEES Transformers Defender Version 1 Mini Model DIY Kit. This kit allows you to build a collectible figure with multiple articulation points. Each blind box contains one random figure from the series.

Recommended Age: 15 years and up.

Warning: Choking Hazard - Small parts. Not for children under 3 years.

2. What's in the Box

Each BLOKEES Transformers Defender Version 1 Mini Model Blind Box contains:

• One unassembled figure kit (consisting of 6-23 pieces, depending on the character).
• Assembly instructions specific to the figure.

Figure 2.1: Example of BLOKEES Transformers Defender Version 1 Mini Model Blind Box packaging. Note: Each box contains one figure.

3. Setup and Assembly

Your BLOKEES figure is a DIY model kit designed for straightforward assembly. No glue, brushes, or cutters are required. Follow the specific assembly instructions included within your product packaging.

General Assembly Steps:

1. Carefully open the blind box and remove all components and the instruction sheet.
2. Identify all parts. Refer to the parts diagram in your instruction sheet.
3. Connect the pieces according to the numbered steps provided in the instruction sheet. Ensure parts click securely into place.
4. Verify all joints are correctly assembled and allow for movement.

Figure 3.1: An example of an assembled BLOKEES Optimus Prime figure in robot mode.

Figure 3.2: An example of an assembled BLOKEES Optimus Prime figure in truck mode. Note: This specific model has a fixed shape and cannot transform between modes.

4. Operating Instructions (Posing)

Your BLOKEES figure features approximately 20 moveable joints, allowing for dynamic posing. While these figures are highly articulated, please note that they have a fixed shape and cannot transform between robot and vehicle modes.

Posing Your Figure:

• Gently manipulate the joints at the shoulders, elbows, hips, and knees to achieve desired poses.
• Avoid excessive force when moving joints to prevent damage.
• The head and waist may also have articulation points, depending on the specific figure.

Figure 4.1: BLOKEES Optimus Prime figure demonstrating a dynamic pose.

Figure 4.2: A selection of BLOKEES figures, showcasing different characters and their fixed modes.

5. Maintenance

Proper care will ensure the longevity of your BLOKEES figure.

Cleaning:

• Wipe the figure gently with a soft, dry cloth to remove dust.
• For stubborn dirt, use a slightly damp cloth with mild soap, then wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.

Storage:

• Store the figure in a cool, dry place away from direct sunlight and extreme temperatures.
• Keep figures away from small children to prevent choking hazards due to small parts.

6. Troubleshooting

If you encounter any issues with your BLOKEES figure, refer to the following common solutions:

Loose Joints:

• If a joint feels loose, gently press the connecting parts together to ensure they are fully seated.
• Avoid over-manipulating loose joints, as this can worsen the issue.

Missing or Damaged Parts:

• Carefully check the packaging and surrounding area for any small, detached parts.
• If a part is genuinely missing or damaged upon opening, contact customer support with your purchase details.

7. Specifications

8. Warranty Information

Warranty information for BLOKEES products is typically provided with your purchase or can be found on the manufacturer's official website. Please retain your proof of purchase for any warranty claims.

9. Support

For further assistance, questions, or to report issues, please contact the manufacturer, Pai Technology, through their official support channels. Refer to the contact information provided on the product packaging or their website.