HOFSTEIN Nikkala Floor Lamp User Manual

1. Important Safety Information

Please read these instructions carefully before assembling, installing, or using your HOFSTEIN Nikkala Floor Lamp. Keep this manual for future reference.

• Electrical Safety: Always disconnect the power supply before cleaning or replacing bulbs. Ensure the lamp is connected to a 230V power source.
• Bulb Type: Use only E14 bulbs with a maximum wattage of 40W per bulb. Do not exceed the specified wattage.
• Indoor Use Only: This lamp is designed for indoor use (IP20 protection rating). Do not expose it to moisture or outdoor elements.
• Stable Placement: Ensure the lamp is placed on a stable, level surface to prevent tipping. The marble base provides stability.
• Cleaning: Clean with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Children and Pets: Keep the lamp out of reach of children and pets to prevent accidents.

2. Package Contents

Carefully unpack all components and check against the list below. If any parts are missing or damaged, contact HOFSTEIN customer support.

Figure 2.1: All components included in the package.

• 1x Marble Base
• 1x Main Pole
• 3x Curved Lamp Arms with Shades
• Assembly Hardware (washers, nuts, etc.)
• Power Cable with On/Off Switch

3. Setup and Assembly

Follow these steps to assemble your Nikkala Floor Lamp:

1. Attach the Main Pole to the Base: Place the marble base on a flat, stable surface. Insert the bottom end of the main pole into the hole in the marble base. Secure it from underneath the base using the provided washer and nut.
2. Connect the Lamp Arms: Carefully insert the three curved lamp arms into the designated slots at the top of the main pole. Ensure they are firmly seated.
3. Install Bulbs: Screw three E14 bulbs (not included) into the sockets located inside each lamp shade. Ensure bulbs are no more than 40W each.
4. Position the Lamp: Place the assembled lamp in your desired location, ensuring the power cable can reach an outlet without being strained or creating a tripping hazard.

Figure 3.1: Lamp dimensions and on/off switch detail.

Figure 3.2: Detail of the adjustable lamp head.

4. Operating Instructions

Operating your HOFSTEIN Nikkala Floor Lamp is straightforward:

• Power Connection: Plug the power cable into a standard 230V electrical outlet.
• Turning On/Off: Locate the rotary switch on the power cable (refer to Figure 3.1). Rotate the switch to the 'ON' position to illuminate the lamp and to the 'OFF' position to turn it off.
• Adjusting Lamp Heads: The three lamp heads are rotatable. Gently adjust each head to direct light as desired (refer to Figure 3.2).
• Dimmability: This lamp is not dimmable.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your lamp:

• Cleaning: Before cleaning, always unplug the lamp from the power outlet. Use a soft, dry, lint-free cloth to wipe down the metal parts and shades. For the marble base, a slightly damp cloth can be used, followed by a dry cloth. Avoid harsh chemicals or abrasive materials.
• Bulb Replacement: Ensure the lamp is unplugged and the bulbs have cooled completely before attempting to replace them. Unscrew the old E14 bulb and screw in a new E14 bulb (max 40W). Do not overtighten.
• Cable Inspection: Periodically check the power cable for any signs of damage, fraying, or kinks. If damage is found, discontinue use and contact a qualified electrician or HOFSTEIN customer support.

6. Troubleshooting

If you encounter any issues with your lamp, refer to the following common problems and solutions:

• Lamp Does Not Turn On:
  • Check if the power cable is securely plugged into a working outlet.
  • Ensure the on/off switch is in the 'ON' position.
  • Verify that the bulbs are correctly installed and not burnt out. Replace if necessary.
  • Test the outlet with another appliance to confirm it has power.
• Flickering Lights:
  • Ensure bulbs are screwed in tightly.
  • Replace bulbs with new ones to rule out faulty bulbs.
• Lamp is Unstable:
  • Ensure the main pole is securely fastened to the marble base.
  • Place the lamp on a flat, even surface.

If the problem persists after trying these solutions, please contact HOFSTEIN customer support.

7. Specifications

8. Warranty and Support

HOFSTEIN products are manufactured with quality and care. For warranty information or technical support, please refer to the purchase documentation or contact your retailer. You can also visit the official HOFSTEIN website for further assistance.

Contact Information: Please refer to your purchase receipt or the HOFSTEIN brand store on Amazon for specific customer service contact details.