SUNPOW Metal Detector MD09 & Pinpointer MD12 User Manual

1. Introduction

Thank you for choosing the SUNPOW Metal Detector MD09 and Pinpointer MD12. This comprehensive kit is designed for both adults and kids, offering advanced features for efficient and accurate metal detection. The MD09 metal detector provides a deep and wide search capability with strong anti-interference, while the MD12 pinpointer ensures precise target identification. Please read this manual thoroughly before operating your devices to ensure proper use, optimal performance, and safety.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the devices:

• Do not use the metal detector in areas with known underground cables, pipes, or hazardous materials.
• The MD09 control box is not waterproof. Avoid submerging it in water. The search coil is waterproof.
• The MD12 pinpointer has partial waterproofing on its front section; however, avoid full submersion unless specified for deeper water use.
• Always obtain permission before detecting on private property.
• Exercise caution when digging to avoid injury or damage to property.
• Keep batteries out of reach of children. Dispose of batteries responsibly.

3. Package Contents

Upon unpacking, please verify that all items listed below are present:

• SUNPOW MD09 Metal Detector (Main Unit with Control Box, Search Coil, Adjustable Stem, Armrest)
• SUNPOW MD12 Pinpointer
• Headphones
• Folding Shovel
• Carrying Bag
• Batteries (for MD09 and MD12)
• User Manual (this document)

Figure 3.1: Complete SUNPOW Metal Detector MD09 and Pinpointer MD12 Kit with included accessories.

4. Product Features

4.1. SUNPOW MD09 Metal Detector

• Advanced DSP Chip: Equipped with an upgraded chip for powerful anti-interference performance and automatic ground balance, ensuring accurate identification.
• 10-inch Waterproof Search Coil: Allows for exploration in various environments, including beaches and shallow water. (Note: Control box is not waterproof).
• 11-inch Detection Depth: Capable of detecting targets up to 11 inches deep, providing a wider and deeper search range.
• Multiple Detection Modes: Features 5 distinct modes for versatile treasure hunting.
• Upgraded User Interface: Features a 2X larger display with abundant indicators and easy button operation for intuitive control.

Figure 4.1: MD09 Control Panel with Power, Mode, Pinpoint (PP), Sensitivity (SENS), and Volume/Light (VOL/LIGHT) buttons.

Figure 4.2: Illustration of the 10-inch search coil and its detection depth capability.

4.2. SUNPOW MD12 Pinpointer

• 360° Comprehensive Detection: Ensures thorough detection of all metals with its side-scan capability.
• 3.5-inch Detection Depth: Quickly pinpoints targets with precision.
• Partial Waterproofing: Front-end section is water-resistant for enhanced protection and durability.
• Dual Alert Modes: Features intuitive sound and vibration alerts to guide you to your target.
• User-Friendly Operation: Simple single-button operation for ease of use.
• Integrated LED Flashlight: Assists in low-light conditions.

Figure 4.3: Key components of the MD12 Pinpointer.

Figure 4.4: The MD12 Pinpointer's partial waterproofing feature.

5. Setup

5.1. Assembling the MD09 Metal Detector

1. Attach the Search Coil: Connect the search coil to the lower stem using the provided bolt and nut. Ensure it is securely fastened but do not overtighten.
2. Assemble the Stem: Insert the lower stem into the middle stem, and then insert the middle stem into the upper stem (which has the control box and armrest). Adjust the length to a comfortable height.
3. Mount the Control Box: Ensure the control box is firmly attached to the upper stem.
4. Wrap the Cable: Carefully wrap the search coil cable around the stem, ensuring it is not pinched or strained. Plug the cable connector into the port on the control box.
5. Install Batteries: Open the battery compartment on the control box and insert the required batteries, observing polarity. Close the compartment securely.
6. Adjust Armrest: Position the armrest for comfortable use.

5.2. Setting Up the MD12 Pinpointer

1. Install Battery: Unscrew the battery cover at the end of the pinpointer. Insert the 9V battery, ensuring correct polarity. Replace the battery cover and twist to secure.
2. Attach Lanyard (Optional): If desired, attach the included lanyard to the pinpointer for added security during use.

Figure 5.1: MD12 Pinpointer with its battery and holster.

6. Operating Instructions

6.1. Operating the MD09 Metal Detector

1. Power On/Off: Press the POWER button to turn the detector on or off.
2. Select Mode: Press the MODE button to cycle through the 5 detection modes: ALL METAL, CUSTOM, JEWELRY, MEMORY, and COINS.
3. Adjust Sensitivity: Press the SENS button, then use the + or - buttons to adjust the sensitivity level. Higher sensitivity increases detection depth but may also increase false signals.
4. Pinpoint Function: Press and hold the PP button to activate the pinpoint mode. This helps narrow down the exact location of a detected target.
5. Volume/Backlight: Press the VOL/LIGHT button to adjust volume. Press and hold to turn the backlight on or off.
6. Sweeping Technique: Hold the search coil parallel to the ground, about 1-2 inches above the surface. Sweep the coil slowly from side to side in overlapping arcs.
7. Interpreting Signals: The display will show a Target ID number and an icon indicating the probable type of metal. Audio tones will also vary based on the detected metal.

6.2. Operating the MD12 Pinpointer

1. Power On/Off: Press the large circular button on the side to turn the pinpointer on or off.
2. Detection: Once powered on, slowly move the tip of the pinpointer over the area where a target was detected by the main metal detector.
3. Alert Modes: The MD12 will emit both sound and vibration alerts when metal is detected. The intensity of the alerts will increase as you get closer to the target.
4. LED Flashlight: The built-in LED light will illuminate the search area, useful in low-light conditions.

Figure 6.1: MD12 Pinpointer's dual alarm mode (sound + vibration).

7. Maintenance

• Cleaning: After each use, wipe down the detector and pinpointer with a damp cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the devices in a cool, dry place when not in use. If storing for extended periods, remove batteries to prevent leakage.
• Battery Care: Replace batteries when the low battery indicator appears. Use high-quality batteries for optimal performance.
• Coil Protection: Avoid striking the search coil against hard objects.

8. Troubleshooting

9. Specifications

• Model Numbers: MD09 (Metal Detector), MD12 (Pinpointer)
• Brand: SUNPOW
• Power Source: Battery Powered (Specific battery types for each device as per packaging)
• MD09 Search Coil: 10-inch, Waterproof
• MD09 Max. Detection Depth: Approximately 11 inches (object dependent)
• MD12 Detection Type: 360° All-Metal
• MD12 Max. Detection Depth: Approximately 3.5 inches (object dependent)
• Display Type: Digital (MD09)
• Recommended Use: Metal Detection for Adults & Kids

10. Warranty and Support

SUNPOW products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your MD09 Metal Detector or MD12 Pinpointer, please refer to the contact information provided on the product packaging or visit the official SUNPOW website. Please retain your proof of purchase for warranty claims.

For further assistance, you may visit the SUNPOW Store on Amazon.