SUNSMAI Automatic Window Cleaning Robot User Manual

1. Introduction

Thank you for choosing the SUNSMAI Automatic Window Cleaning Robot. This intelligent device is designed to simplify window cleaning with its powerful 2800Pa suction, smart path planning, and convenient water spray function. Please read this manual thoroughly before use to ensure safe and optimal performance.

The SUNSMAI Automatic Window Cleaning Robot, showcasing its main unit, remote control, and included microfiber cleaning pads.

2. Safety Precautions

Your safety is paramount. Always adhere to the following precautions:

• Ensure the robot is securely attached to the glass surface before operation. The 2800Pa suction power is designed for strong adherence.
• Always connect the safety rope to a secure anchor point before starting the robot, especially for high-rise windows.
• The robot features edge collision and fall prevention, but continuous monitoring during operation is recommended.
• The emergency battery provides 30 minutes of power in case of power interruption, allowing time to retrieve the robot. This is not for cordless operation.
• Only use clean water in the water tank. Do not add detergents or other cleaning solutions directly into the tank.
• Keep hands and loose clothing away from moving parts during operation.

Visual representation of the robot's four key safety features, including strong suction and fall prevention mechanisms.

3. Package Contents

Verify that all items are present in your package:

• SUNSMAI Window Cleaning Robot
• Remote Control
• Power Adapter
• AC Power Cord
• 5.5-meter Extension Cable
• Safety Rope
• 6 Pairs (12 pieces) of Microfiber Cleaning Cloths
• User Manual

4. Setup

4.1 Power Connection

1. Connect the power adapter to the robot's power input port.
2. Plug the AC power cord into the power adapter, then into a standard 110V wall outlet.
3. For larger windows or extended reach, use the provided 5.5-meter extension cable between the power adapter and the robot.

Illustration of the robot's power connection and the use of the 5.5-meter extension cable for increased reach.

4.2 Water Tank Filling

1. Locate the water tank cap on the robot.
2. Carefully open the cap and fill the 40ml tank with clean water.
3. Securely close the cap. Note: It is normal to find some residual water in the tank before initial use, as this helps protect internal components during storage.

Detail of the robot's 40ml water tank and its intelligent electric control water spray system.

4.3 Attaching Cleaning Cloths

1. Ensure the robot is powered off.
2. Attach two clean microfiber cloths to the rotating pads on the underside of the robot. Ensure they are securely fastened.

The eco-fiber microfiber cleaning cloths, provided in 6 pairs, designed for easy attachment and effective cleaning.

5. Operating Instructions

5.1 Initial Cleaning (Dry Pass)

For optimal results, especially on heavily soiled windows, perform a dry cleaning pass first to remove loose dust and debris.

1. Attach dry, clean microfiber cloths to the robot.
2. Place the robot on the window surface.
3. Turn off the auto-mist function (if active) via the remote or app.
4. Start the cleaning cycle. The robot will navigate and pick up dust.

It is recommended to perform a dry pass first to remove dust before wet cleaning.

5.2 Wet Cleaning (Second Pass)

After the dry pass, or for general cleaning, proceed with wet cleaning:

1. Replace the dry cloths with a fresh pair of clean, slightly damp microfiber cloths (dampened with water only).
2. Ensure the water tank is filled with clean water.
3. Activate the automatic water spray mode via the remote or app, or use manual spray as needed.
4. Start the cleaning cycle. The robot will spray water and clean the surface.

After the dry pass, replace cloths and activate automatic spray for effective wet cleaning.

5.3 Intelligent Path Planning 3.0

The robot utilizes Intelligent Path Planning 3.0 to efficiently cover surfaces. It automatically detects frames and obstacles and adjusts its route using three effective patterns:

• From Top to Bottom: Ideal for general cleaning.
• From Top to Left: Useful for specific window layouts.
• From Top to Right: Another directional option for comprehensive coverage.

For persistent dirt, you can switch to manual mode for focused re-cleaning of specific spots.

The robot's intelligent path planning system, showing its three distinct cleaning patterns for thorough coverage.

5.4 Control Methods

The robot can be controlled via:

• Remote Control: Use the included remote to start/stop, change modes, and manually direct the robot.
• Mobile App Control: Download the dedicated mobile app to control the robot from your smartphone, offering enhanced convenience and settings adjustments.

The robot offers flexible control options via both a physical remote and a mobile application for user convenience.

5.5 Applicable Surfaces

The SUNSMAI Window Cleaning Robot is versatile and suitable for various smooth surfaces, including:

• High-rise glass windows
• Bathroom mirrors and glass enclosures
• Sunshine room glass panels
• Other smooth, vertical surfaces

The robot's versatility allows it to clean various surfaces, including high-rise windows, bathroom glass, and sunshine room panels.

6. Maintenance

6.1 Cleaning Microfiber Cloths

The included microfiber cloths are reusable and easy to clean:

• After each use, remove the cloths from the robot.
• Wash them by hand with mild soap and water, or machine wash them on a gentle cycle.
• Air dry completely before reattaching them to the robot for the next cleaning session.

6.2 Storing the Robot

When not in use, store the robot in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the water tank is empty before long-term storage.

7. Troubleshooting

If you encounter issues with your SUNSMAI Window Cleaning Robot, refer to the table below for common problems and solutions:

8. Specifications

Detailed technical specifications for the SUNSMAI Window Cleaning Robot:

Physical dimensions of the SUNSMAI Intelligent Water Spray Window Cleaning Machine.

9. Warranty and Support

Your SUNSMAI product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact customer support.

If you have any questions about your product, require technical assistance, or need to address any issues, please reach out to us via the following path:

• Your Account > Orders > Order Detail
• Sold by: Easylife US - Ask a question

We offer 12-hour swift help and 24/7 support to ensure your satisfaction.

Contact information for SUNSMAI customer assistance, highlighting swift help and 24/7 support.