Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your SADENICEL Full Size Platform Bed Frame. Designed for comfort and convenience, this bed frame features an upholstered headboard with integrated LED lighting, a charging station, and two under-bed storage drawers. Please read this manual thoroughly before beginning assembly or use to ensure safe and proper operation.
Important Safety Information
- Do not exceed the maximum weight recommendation of 800 pounds.
- Be cautious of sharp edges and metal legs during assembly and use.
- Always follow the assembly instructions carefully to prevent instability or injury.
- Use appropriate tools for assembly.
- Keep small parts away from children during assembly.
Package Contents
Verify that all components listed below are present before beginning assembly. All parts and tools are marked with letters or numbers for easy identification.
Image: All components of the SADENICEL bed frame, including headboard sections, metal frame pieces, wooden slats, and hardware, neatly laid out on the floor.
Main Components:
- Upholstered Headboard (with LED light and charging station)
- Metal Bed Frame Sections
- Wooden Slats (10 pieces)
- 2 Storage Drawers (with wheels)
- Footboard
- Side Rails
Hardware & Tools:
- Assorted Screws, Bolts, and Washers (labeled)
- Allen Key (included for assembly)
- Remote Control for LED Lights
Setup and Assembly
The bed frame is carefully packaged in one box. All parts and tools are marked with letters or numbers, and a detailed installation instruction manual is included to facilitate assembly. It is recommended to assemble the bed frame with at least two people.
General Assembly Tips:
- Lay out all components on a soft, clean surface to prevent scratches.
- Identify each part by its label (letters/numbers).
- Do not fully tighten screws until all components are loosely assembled, then tighten securely.
- Refer to the included paper manual for step-by-step diagrams.
Assembly Overview:
- Assemble Headboard: Attach the side supports to the main headboard section. Ensure the charging station and LED strip are correctly positioned.
- Construct Bed Frame Base: Connect the side rails and footboard to the headboard. The metal frame uses a hook-and-loop closure system for easy assembly.
- Install Slats: Place the 10 metal slats across the frame. These slats are designed with EVA silent sponge to minimize noise.
- Assemble Storage Drawers: Construct the two sliding drawers and attach their wheels. The wheels are designed to be easily pushed in and pulled out.
Video: A detailed installation guide for the bed frame with storage. This video demonstrates the step-by-step assembly process, from unboxing to final setup, highlighting key connections and features.
Image: Visual representation of the bed frame's anti-slipping fixtures to secure the mattress, the bolt-free easy assembly system, and the EVA mute sponge for noise reduction.
Operating Instructions
LED Headboard Lighting:
The headboard is equipped with RGB LED lights. Use the provided remote control to customize your lighting experience.
- Color Selection: Choose from 12 different colors.
- Brightness Adjustment: Adjust brightness from 0% to 100%.
- Scene Modes: Select from 4 pre-set scene modes.
- Timing Function: Set a timer for the lights to turn off automatically.
- Speed Adjustment: Control the speed of dynamic lighting effects.
Video: Demonstration of the LED headboard lighting features, showcasing various colors, brightness levels, and scene modes controlled by the remote.
Video: A brief overview of the metal platform bed frame with LED lighting, highlighting its modern design and integrated light features.
Integrated Charging Station:
The headboard includes a built-in power strip for convenient charging of your devices.
- 2 x AC Outlets
- 1 x USB Port
- 1 x Type-C Port
Connect your mobile phone, tablet, or other devices directly to the charging station from the comfort of your bed.
Image: A close-up view of the headboard's integrated charging station, showing two AC outlets, one USB port, and one Type-C port, with various devices connected for charging.
Storage Drawers:
The two spacious sliding drawers located under the bed provide ample storage for various items.
- Easily slide drawers in and out on their wheels.
- Ideal for organizing sheets, quilts, pillows, seasonal clothing, and other personal items.
Image: The two large capacity under-bed storage drawers are shown pulled out, revealing neatly organized clothes and other items, demonstrating their practical use.
Maintenance
To maintain the quality and appearance of your SADENICEL bed frame, follow these simple care instructions:
- Cleaning: Wipe the frame and upholstered headboard with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Dusting: Regularly dust the headboard and frame to prevent buildup.
- Tightening: Periodically check and tighten all screws and bolts to ensure stability.
- Drawer Care: Keep the drawer tracks clean to ensure smooth operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is squeaking. | Loose connections or insufficient EVA silent sponge. | Ensure all bolts are tightened. Verify EVA silent sponge is correctly placed on slats. |
| LED lights not working. | Power connection issue or remote control battery. | Check power cable connection. Replace remote control battery. Ensure remote is pointed at the sensor. |
| Charging station not functioning. | Power strip not connected or device cable issue. | Ensure the bed frame's power cord is plugged into a working wall outlet. Test with a different device cable. |
| Drawers are difficult to slide. | Obstruction in tracks or damaged wheels. | Clear any debris from the drawer tracks. Inspect wheels for damage. |
Specifications
| Feature | Detail |
|---|---|
| Size | Full |
| Product Dimensions | 82.4"L x 56.7"W x 47.1"H |
| Weight Capacity | 800 LBS |
| Recommended Mattress Height | 10"-14" (No Box Spring Needed) |
| Material | Steel Frame & Upholstered with Linen Fabric |
| Charging Station | 2 AC Outlets, 1 USB Port, 1 Type-C Port |
| LED Lights | RGB, 12 Colors, 0-100% Brightness, 4 Scene Modes, Timing Function, Speed Adjustment (Remote Control Included) |
| Storage | 2 Under-Bed Sliding Drawers, 2-Tier Headboard Shelf |
| Noise Reduction | EVA Silent Sponge on Slats |
| Assembly Required | Yes (Easy Assembly) |
Warranty and Support
For any questions, missing parts, or assistance with assembly, please contact SADENICEL customer support. You can reach us by logging into your Amazon account, selecting "Your Orders," finding the order ID for your bed frame, and clicking "Contact Seller."
Please retain your proof of purchase for warranty claims.
