Before You Begin
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching during assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury. DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required. DO NOT ALLOW CHILDREN TO CLIMB OFURNITURE.
Parts List
| Part Identifier | Description | Quantity |
|---|---|---|
| A | Side Frame Piece | 2 pcs |
| B | Headboard/Footboard Connector | 2 pcs |
| C | Support Beam Connector | 2 pcs |
| D | Center Support Beam | 1 pcs |
| E | Additional Support Beam | 3 pcs |
| F | Bed Slats | 12 pcs |
| G | Allen Wrench | 1 pcs |
| H | Bolt | 10 pcs |
| K | Screw | 13 pcs |
Diagram Description (Page 2): The diagram shows the main components of the bed frame. Two large side frame pieces (A) form the base. Two connector pieces (B) attach to the ends of the side frames. Support beam connectors (C) are also shown. A central support beam (D) and additional support beams (E) are included. Numerous bed slats (F) are displayed, along with an Allen wrench (G) and hardware (H, K).
Assembly Steps
- Step 1: Attach one side frame piece (A) to another side frame piece (A) using two bolts (H). The diagram indicates a "Welding point inner side" for alignment.
- Step 2: Attach a headboard/footboard connector (B) to the assembled side frame pieces (A) using two bolts (H). The diagram indicates a "Welding point inner side" for alignment.
- Step 3: Attach a bracket (K) to the side frame piece (A) using two screws (H). Then, attach a headboard/footboard connector (B) to this bracket (K) using two screws (K).
- Step 4: Attach the center support beam (D) to the side frame piece (A) using one bolt (H).
- Step 5: Attach additional support beams (E) to the side frame piece (A) using screws (K). The diagram shows three such beams being attached.
- Step 6: This step visually depicts the assembled frame structure, showing the main components connected.
- Step 7: This step shows the bed slats (F) being placed across the frame.
- Step 8: Instruction: "Please peel off the upper strip on adhesive tape, which can keep your mattress in place." This refers to adhesive strips on the slats.
Related Documents
 |
Motorized Adjustable Bed Base Frame Assembly and Operation Guide This guide provides comprehensive instructions for assembling, operating, and troubleshooting the Flash Furniture Motorized Adjustable Bed Base Frame. It includes a parts list, safety precautions, warranty information, and remote control functions. |
 |
Flash Furniture HERCULES Series Metal Restaurant Chairs | 'X' Back & Ladder Back Models Discover the HERCULES Series of durable metal restaurant chairs by Flash Furniture. Featuring 'X' back and ladder back designs with various vinyl and wood seat options. Browse model codes and product numbers for commercial seating solutions. |
 |
Flash Furniture Restaurant Table Tops and Base Sets Explore Flash Furniture's range of individual restaurant table tops and base sets, featuring durable laminate tops in various sizes and finishes, paired with sturdy cast iron bases. |
 |
Flash Furniture Restaurant Table Tops and Base Sets Explore Flash Furniture's collection of individual restaurant table tops and base sets, featuring rectangular laminate table tops in various sizes and finishes, paired with sturdy bases. |
 |
Flash Furniture 42" Square Laminate Table Tops with Bar Height Bases Explore Flash Furniture's 42" square laminate table tops available with 33" x 33" or 24" round bar height table bases. Choose from various finishes including Black, Mahogany, Natural, and Walnut. |
 |
Restaurant Table Tops and Base Sets with Foot Rings Explore a selection of 36-inch and 42-inch round laminate table tops with matching bar height and counter height bases, available in Black, Mahogany, Natural, and Walnut finishes. Product codes and dimensions are provided for each item. |
 |
Flash Furniture Restaurant Farm Tables and Benches Explore the Flash Furniture collection of restaurant farm tables and benches, including HERCULES Series Antique Rustic Solid Pine Folding Farm Tables and Benches, and Farm Tables with X-Back Chairs. Available in various sizes and configurations. |
 |
Leather Executive Swivel Chair Assembly Instructions - Flash Furniture GO-2286H Step-by-step assembly guide for the Flash Furniture Leather Executive Swivel Chair (model GO-2286H). Includes parts list, safety warnings, and assembly tips. |