Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Hot Wheels Stunt Track Mid-Air Crash Set, Model JFD12. This track set is designed for racing, stunting, and crashing, featuring a motorized booster and foldable design for convenient storage. Please read these instructions carefully before use to ensure safe and optimal performance.
What's in the Box
Your Hot Wheels Stunt Track Mid-Air Crash Set includes the following components:
- Hot Wheels Stunt Track Base with Motorized Booster
- Assorted Track Pieces (loops, curves, jumps, diverter)
- 1 Hot Wheels 1:64 Scale Die-Cast Toy Car
- Instruction Manual
Note: Additional 1:64 scale cars are sold separately.
Safety Information
- Adult Supervision Recommended: This product is recommended for ages 5 years and up. Adult supervision is advised during assembly and play.
- Battery Safety: Requires 3 LR44 batteries (not included). Ensure correct battery polarity. Do not mix old and new batteries, or different types of batteries. Remove batteries if the toy is not used for an extended period.
- Choking Hazard: Small parts may be present. Not suitable for children under 3 years.
- Moving Parts: Keep fingers, hair, and loose clothing away from the motorized booster and moving track parts during operation.
Setup Instructions
- Unpack Components: Carefully remove all track pieces and the motorized base from the packaging.
- Install Batteries: Locate the battery compartment on the underside of the motorized booster unit. Using a small Phillips head screwdriver (not included), open the compartment and insert 3 LR44 batteries, ensuring correct polarity (+/-). Close the compartment securely.
- Assemble Track Base: Place the main motorized booster unit on a flat, stable surface.
- Connect Track Pieces: Attach the various track sections, including the loop, curves, and jump ramps, to the main booster unit and to each other. Ensure all connections are secure using the Hot Wheels Speed Snap Track System. Refer to the diagram below for typical assembly.
Image: Fully assembled Hot Wheels Stunt Track Mid-Air Crash Set, showing the motorized booster, loop, curves, and crash zone.
- Verify Connections: Double-check that all track pieces are firmly connected to prevent cars from derailing during play.
Operating Instructions
- Power On: Locate the power switch on the motorized booster and turn it to the "ON" position. You should hear the booster motor activate.
- Place Car: Carefully place one Hot Wheels 1:64 scale die-cast car onto the track entrance leading to the motorized booster.
Image: A Hot Wheels car is positioned at the entrance of the motorized booster, ready for launch.
- Launch Car: The motorized booster will automatically launch the car through the track, including a jump-stunt, a loop, and curves.
Image: Multiple Hot Wheels cars navigating the track's loop and curved sections, demonstrating the continuous action.
- Engage Diverter: Use the track diverter to change the car's path, directing it to different challenges or stopping the continuous racing.
- Mid-Air Crash Action: For mid-air crash scenarios, introduce additional 1:64 scale cars onto the track at intervals. The motorized booster will continue to launch cars, leading to potential collisions in designated crash zones.
Image: Two Hot Wheels cars are shown in mid-air, about to collide within the track's crash zone, illustrating the dynamic play feature.
- Folding for Storage: When play is complete, the track set can be folded for compact storage and portability. Follow the folding mechanism instructions to collapse the track.
Image: The Hot Wheels Stunt Track is shown in its folded configuration, being held by a hand, highlighting its portability and compact storage design.
- Power Off: Always turn the power switch to the "OFF" position and remove batteries when not in use.
Product Demonstration Video
Video: Official demonstration of the Hot Wheels Stunt Track Mid-Air Crash Set, showcasing its features including the motorized booster, track layout, and crash action.
Maintenance
- Cleaning: Wipe the track and booster unit with a dry or slightly damp cloth. Do not immerse the motorized unit in water.
- Storage: Store the track set in a cool, dry place away from direct sunlight when not in use. Utilize the folding feature for compact storage.
- Battery Replacement: Replace batteries when the motorized booster's performance diminishes.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cars not launching or moving slowly. | Low batteries in the motorized booster. | Replace with fresh LR44 batteries. |
| Cars derailing from the track. | Track pieces not securely connected. | Ensure all track connections are firm and flush. |
| Motorized booster not working. | Power switch is off or batteries are incorrectly installed. | Check power switch position and battery polarity. Replace batteries if needed. |
Specifications
- Model Number: JFD12
- Product Dimensions: 33.82 x 24.61 x 27.05 inches (assembled)
- Item Weight: 3.63 pounds
- Recommended Age: 5 years and up
- Batteries Required: 3 x LR44 (not included)
- Manufacturer: Mattel Inc.
Warranty and Support
For warranty information, product support, or to purchase replacement parts, please contact Mattel Inc. customer service. Refer to the packaging or the official Hot Wheels website for the most current contact details.
Website: www.hotwheels.com
Manufacturer: Mattel Inc.
