OLIXIS Wood Lift Top Coffee Table User Manual

1. Introduction

Thank you for choosing the OLIXIS Wood Lift Top Coffee Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new coffee table. Please read these instructions carefully before beginning assembly and retain them for future reference.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in injury or damage to the product.

• Heavy lifting may cause injury. Always use proper lifting techniques or seek assistance during assembly.
• Do not exceed the maximum weight recommendation of 200 pounds (90.7 kg) for the tabletop.
• Ensure the lift top mechanism is securely locked in place when not in use to prevent accidental movement.
• Keep fingers and other body parts clear of the lift top mechanism during operation to avoid pinching or injury.
• For enhanced stability, consider securely anchoring the table to a wall, especially in households with children or pets, to prevent tipping.
• Refer to the included assembly guide for proper installation and ensure all components are correctly fastened.

3. Package Contents

Before assembly, verify that all parts and hardware are present. If any items are missing or damaged, please contact OLIXIS customer support.

• OLIXIS Wood Lift Top Coffee Table components
• Assembly Guide
• Installation Tool (e.g., Allen wrench)
• Necessary screws and fasteners

4. Setup and Assembly

Assembly of the OLIXIS Wood Lift Top Coffee Table is designed to be straightforward. Follow the detailed, illustrated instructions provided in the enclosed Assembly Guide. A screwdriver is recommended for certain steps.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Identify Parts: Match each component with the corresponding labels in the Assembly Guide.
3. Follow Step-by-Step Instructions: Adhere strictly to the sequence of steps outlined in the Assembly Guide. Pay close attention to diagrams and warnings.
4. Secure Fasteners: Ensure all screws and fasteners are tightened securely, but do not overtighten, which could damage the wood.
5. Check Hinge Alignment: During the installation of the lift-top mechanism, ensure hinges are aligned correctly to prevent uneven gaps between the tabletop panels. Adjust as needed before fully tightening.

Image 4.1: Assembled OLIXIS Lift Top Coffee Table in use.

Image 4.2: Key features of the coffee table, including the lift mechanism and leg design.

5. Operating Instructions

The OLIXIS Wood Lift Top Coffee Table offers versatile functionality with its adjustable tabletop and integrated storage.

5.1. Lift Top Operation

The tabletop can be effortlessly raised to an elevated height of approximately 6.3 inches (16 cm). This feature allows the table to function as a temporary dining surface or a comfortable workstation for a laptop.

1. To Lift: Gently pull the front edge of the liftable tabletop upwards. The high-quality metal mechanism will assist in a smooth, quiet lift.
2. To Lower: Gently push the elevated tabletop downwards. Guide it slowly until it rests flush with the fixed section. Ensure no objects are obstructing the mechanism or the hidden compartment.

Image 5.1: Demonstrating the lift-top mechanism and safe groove handle.

5.2. Storage Compartments

• Hidden Compartment: Beneath the liftable tabletop, a spacious hidden compartment is available for storing items such as laptops, remote controls, magazines, or other daily essentials, keeping them dust-free and out of sight.
• Side Shelves: Two open shelves are located on the side of the coffee table, providing additional space for blankets, books, decorative items, or snacks.

Image 5.2: Overview of the table's various storage options.

6. Maintenance

Proper care will extend the life and appearance of your coffee table.

• Cleaning: Wipe the table surfaces with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: The table is not stain-resistant. Promptly wipe up any spills to prevent staining or damage to the wooden grain finish.
• Protection: Use coasters under drinks and placemats under hot items to protect the tabletop from heat and moisture rings.
• Mechanism Care: Periodically check the lift mechanism for smooth operation. If it becomes stiff or noisy, ensure no debris is obstructing it. Lubrication with a silicone-based spray may be applied sparingly if needed, following product instructions.

Image 6.1: The wooden textured board surface.

7. Troubleshooting

If you encounter issues with your OLIXIS coffee table, refer to the following common solutions:

• Table Wobbles: If the table feels unstable after assembly, re-check all fasteners to ensure they are securely tightened. Verify that all legs are evenly installed and making full contact with the floor.
• Lift Top Not Smooth/Noisy: Check for any obstructions in the lift mechanism. Ensure the mechanism is clean. If necessary, apply a small amount of silicone lubricant to the moving parts.
• Tabletop Panels Misaligned: If the liftable and fixed tabletop panels do not align perfectly, this can often be adjusted by slightly repositioning the hinges on the movable top. Loosen the hinge screws, adjust the panel, and then re-tighten.
• Difficulty Opening Hidden Compartment: Ensure the lift top is fully raised. The notch on the side of the table is designed for easy opening; ensure your fingers are positioned correctly.

8. Specifications

9. Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the documentation included with your purchase or contact OLIXIS customer service directly. Contact details can typically be found on the product packaging or the official OLIXIS website.