Waterdrop Rechargeable Water Filter Dispenser User Manual

1. Product Overview

The Waterdrop Rechargeable Water Filter Dispenser (Model: WD-ED11W) is a 15-cup capacity countertop water filtration system designed to provide cleaner, fresher water instantly. It features a 5-stage filtration process that reduces over 70 contaminants, including chlorine, copper, lead, and helps soften water by minimizing calcium and magnesium.

Figure 1: Waterdrop Rechargeable Water Filter Dispenser with its components.

This electric dispenser offers instant water delivery with a single button press, eliminating the wait time associated with traditional gravity-fed pitchers. Its rechargeable battery provides up to 20 days of standby time on a single charge, ensuring portability and convenience. Smart indicators keep you informed about power status and filter life.

Figure 2: Key features and dimensions of the Waterdrop dispenser.

2. Key Features

• 5-Stage Filtration: Reduces over 70 contaminants including chlorine, copper, lead, mercury, cadmium, large particles, sediments, and VOCs. It also helps minimize calcium and magnesium.
• Water Softening: Helps reduce limescale buildup, extending the lifespan of appliances that use water.
• Instant Dispensing: Delivers filtered water in 1 second with a simple button press.
• Long Standby Time: Built-in rechargeable battery provides up to 20 days of standby time on a full charge.
• Smart Indicators: Power indicator (flashes red when low, green when charging completed) and filter life indicator (blue for working, red for replacement).
• Portable Design: Features a convenient handle and compact size for easy placement in various locations, including refrigerators.

Figure 3: Detailed view of the 5-stage filtration system.

Figure 4: Benefits of softer water for appliances.

3. Setup Guide

3.1 Initial Charging

Before first use, fully charge the dispenser. Connect the provided USB Type-C cable to the charging port on the side of the dispensing unit and plug it into a compatible USB adapter (not included). The power indicator light will show charging status.

Figure 5: Smart indicators for power and filter life.

3.2 Filter Installation and Preparation

1. Take out the water pumping unit from the main reservoir.
2. If replacing, turn counter-clockwise to remove the used filter.
3. Screw a new filter clockwise into the lock position.
4. For better filtration, activate the filter by flushing it. Discard the first tank of filtered water and do not drink it.
5. When using a new filter for the first time, wait about 10 seconds for water to flow through.
6. Put the water pumping unit back into the system.

Figure 6: Fast filter replacement steps.

4. Operating Instructions

4.1 Filling the Reservoir

Open the small circular lid on the top of the dispenser to access the filling port. Pour tap water directly into the reservoir. The dispenser has a convenient handle for easy transport to and from your sink for refilling. Ensure not to exceed the maximum fill line.

4.2 Dispensing Water

Place your cup or container directly under the dispensing spout. Press the water drop button on the top of the dispensing unit twice to start the water flow. Press the button once more to stop the flow. The system provides instant filtered water.

4.3 Smart Indicator Lights

• Power Indicator: Flashes red when the battery is low and needs recharging. Stays green when charging is complete.
• Filter Life Indicator: A blue light indicates the filter is working properly. A red flashing light suggests the filter needs replacement soon. A solid red light means the filter needs immediate replacement.

5. Maintenance

5.1 Filter Replacement

The filter should be replaced approximately every 3 months or after filtering 80 gallons of water, whichever comes first. Follow the steps outlined in Section 3.2 for filter installation and preparation when replacing the filter.

5.2 Cleaning

Regularly clean the reservoir and dispensing unit with mild soap and water. Ensure all parts are thoroughly rinsed and dried before reassembly. Do not submerge the electronic dispensing unit in water.

6. Troubleshooting

• Slow Water Flow: This may indicate a clogged or expired filter. Check the filter life indicator and replace the filter if necessary.
• Unpleasant Taste or Odor: This is typically a sign that the filter needs to be replaced. Ensure the new filter is properly flushed before use.
• Dispenser Not Turning On/Off: Ensure the battery is charged. If the issue persists, try resetting the unit by holding down the water drop button for 3 seconds (after filter replacement).
• Water Leaks: Check that all components, especially the filter and dispensing unit, are correctly seated and tightened.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the official Waterdrop website or contact their customer service directly. Keep your purchase receipt for any warranty claims.