CHOEZON TYM01BB

CHOEZON TYM01BB Freestanding Coat Rack with Umbrella Holder

Instruction Manual

1. Introduction

Thank you for choosing the CHOEZON TYM01BB Freestanding Coat Rack. This manual provides detailed instructions for the safe assembly, proper operation, and effective maintenance of your new coat rack. Please read this manual thoroughly before assembly and retain it for future reference.

2. Safety Information

  • Weight Capacity: Do not exceed the maximum recommended load of 29.94 kg (66 lbs) for the entire unit. Each hook supports up to 3 kg. Overloading can cause instability and damage.
  • Assembly: Assemble the coat rack on a flat, stable surface. Ensure all screws are tightened securely before use.
  • Stability: Regularly check the stability of the coat rack, especially after moving it. Adjust the feet as necessary to maintain balance.
  • Children and Pets: Keep small parts away from children and pets during assembly. Do not allow children to climb on or play with the coat rack.
  • Placement: Place the coat rack in a location where it will not obstruct pathways or pose a tripping hazard.

3. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

  • Main Pole Sections (Upper, Middle, Lower)
  • Hook Assemblies (12 hooks total)
  • Base Frame with Umbrella Holder
  • Umbrella Tray
  • Adjustable Feet (4 pieces)
  • Assembly Hardware (screws, washers)
  • Allen Key (for assembly)
  • Instruction Manual

4. Setup and Assembly

The CHOEZON TYM01BB coat rack is designed for straightforward assembly. All necessary tools are included. Follow these steps carefully:

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided diagrams (if applicable).
  2. Attach Adjustable Feet: Screw the four adjustable feet into the designated holes on the bottom of the base frame.
  3. Assemble Base: Secure the umbrella tray within the base frame.
  4. Connect Lower Pole: Attach the lower pole section to the base frame using the provided screws and Allen key. Ensure it is firmly secured.
  5. Attach Middle Pole: Connect the middle pole section to the lower pole.
  6. Attach Upper Pole: Connect the upper pole section to the middle pole.
  7. Install Hooks: Attach the hook assemblies to the upper and middle pole sections at the desired heights. The hooks feature round ball-shaped heads to prevent items from slipping and protect fabrics.
  8. Final Tightening: Once all parts are assembled, gently tighten all screws to ensure maximum stability. Do not overtighten.
  9. Adjust for Stability: Place the assembled coat rack in its intended location. Adjust the individual adjustable feet by turning them until the coat rack stands firmly and level on the floor.
CHOEZON TYM01BB Freestanding Coat Rack

Image: Fully assembled CHOEZON TYM01BB Freestanding Coat Rack.

Detail of 12 Handy Hooks

Image: Close-up view of the 12 hooks with polished rounded heads, designed for versatile storage and to prevent clothing scratches.

Detail of Rectangular Umbrella Stand

Image: Detail of the rectangular umbrella stand, providing space for umbrellas and enhancing overall stability.

5. Operating Instructions

The CHOEZON TYM01BB coat rack is designed for practical and efficient storage of various items.

  • Using the Hooks: The coat rack features 12 hooks at three different heights. Use the upper hooks for longer coats and jackets, middle hooks for scarves and bags, and lower hooks for smaller items or for children's access. The rounded ball-shaped heads prevent items from slipping off and protect fabrics from damage.
  • Umbrella Holder: The integrated umbrella holder at the base is suitable for storing long-handled umbrellas. The bottom tray is designed to catch any dripping water, keeping your floor dry and clean.
  • Weight Distribution: For optimal stability, distribute items evenly across the hooks. Avoid hanging all heavy items on one side.
12 Handy Hooks and Total Load Capacity

Image: Illustration highlighting the 12 handy hooks and the total load capacity of 66 lbs (29.94 kg).

Coat Rack in Corner Space

Image: The coat rack positioned in a corner, demonstrating its space-saving design for maximizing space utilization.

6. Maintenance

Proper maintenance will extend the life and appearance of your CHOEZON coat rack.

  • Cleaning: Wipe the metal surfaces with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the scratch-resistant painted finish.
  • Drying: Ensure the umbrella tray is emptied and dried regularly to prevent water buildup and potential rust.
  • Tightening Screws: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary to maintain structural integrity.
  • Adjustable Feet: Re-adjust the feet if the coat rack becomes wobbly or uneven.

7. Troubleshooting

If you encounter any issues with your coat rack, refer to the following common problems and solutions:

  • Coat Rack is Wobbly:
    Solution: Ensure the coat rack is placed on a flat, level surface. Adjust the four adjustable feet at the base until the unit is stable. Check that all assembly screws are securely tightened.
  • Hooks are Loose:
    Solution: Tighten the screws that secure the hook assemblies to the main pole sections.
  • Items Slide Off Hooks:
    Solution: The hooks are designed with rounded ball-shaped heads to minimize slipping. Ensure items are hung properly. Avoid overloading individual hooks beyond their 3 kg capacity.
  • Missing Parts:
    Solution: If you find any parts missing upon unboxing, please contact CHOEZON customer support immediately for assistance.

8. Specifications

Model NumberTYM01BB
BrandCHOEZON
MaterialHigh-quality Metal with Scratch-Resistant Paint
Overall Dimensions (L x W x H)25.5 cm x 25.5 cm x 182 cm (10.0 in x 10.0 in x 71.6 in)
Total Load Capacity29.94 kg (66 lbs)
Per Hook Capacity3 kg
Number of Hooks12
Special FeaturesIntegrated Umbrella Holder with Drip Tray, Adjustable Feet
Product Size Diagram

Image: Detailed diagram showing the dimensions of the CHOEZON TYM01BB coat rack.

Square Metal Base with Adjustable Feet

Image: Close-up of the square metal base equipped with adjustable feet to enhance overall stability on various floor types.

9. Warranty and Support

CHOEZON is committed to providing high-quality products. For warranty information, product support, or to report missing/damaged parts, please refer to the contact information provided with your purchase or visit the official CHOEZON website. Please have your model number (TYM01BB) and purchase details ready when contacting support.

© 2026 CHOEZON. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.