FlossJet Water Dental Flosser Cordless Oral Irrigator User Manual

Introduction

The FlossJet Water Dental Flosser is designed to provide an effective and convenient solution for daily oral hygiene. This cordless oral irrigator features multiple cleaning modes, a large water tank, and specialized tips to cater to various dental needs, ensuring a thorough clean and improved gum health.

Key Features:

• Deep Cleaning and Gum Health Improvement: Adjustable water pressure from 20 to 115 PSI effectively removes stains and plaque, particularly beneficial for individuals with braces.
• 300ml Detachable Water Tank: Ensures sufficient water for a complete cleaning session without frequent refills. The open design allows for easy filling and cleaning.
• IPX7 Waterproof Design: Allows for safe use in the shower, enhancing convenience.
• Multiple Cleaning Modes and Memory Function: Offers Low, Medium, High, and Pulse modes to suit different preferences. The device remembers the last used mode for a seamless experience.
• 5 Professional 360° Rotating Tips: Includes 2 standard tips, 1 orthodontic tip, 1 periodontal pocket tip, and 1 tongue scraper tip for comprehensive oral care.
• Extended Battery Life and Portable Design: Built-in high-capacity lithium battery provides 14 to 21 days of use on a single charge. USB-C charging port for convenient charging, ideal for travel.
• Electroplating Technology and Ergonomic Design: Features a smooth, durable finish and a curved handle for a comfortable grip.

Package Contents

Please ensure all items are present upon unboxing:

• FlossJet Oral Irrigator Unit (Model FC5240)
• 2 Standard Jet Tips
• 1 Orthodontic Jet Tip
• 1 Periodontal Pocket Jet Tip
• 1 Tongue Scraper Tip
• USB-C Charging Cable
• User Manual

Setup Instructions

Follow these steps to prepare your FlossJet Oral Irrigator for first use:

1. Attach Jet Tip: Select the desired jet tip and insert it into the opening at the top of the main unit until it clicks securely into place.
2. Detach Water Tank: Rotate the bottom part of the device counter-clockwise to detach the water tank.
3. Fill Water Tank: Fill the detachable water tank with lukewarm water. For optimal results, use warm water.
4. Reattach Water Tank: Align the water tank with the main unit and rotate clockwise until it is securely fastened.
5. Charge Device: If the device is not charged, connect the provided USB-C cable to the charging port on the device and a suitable power source. The indicator light will show charging status.

Operating Instructions

To use your FlossJet Oral Irrigator effectively, follow these guidelines:

1. Select Mode: Press the mode button (located below the power button) to cycle through the four cleaning modes: Low, Medium, High, and Pulse. The device will remember your last selected mode.
2. Position Tip: Lean over a sink and place the jet tip into your mouth, directing the water stream at a 90-degree angle to your gumline.
3. Start Flossing: Press the power button to begin the water stream. Keep your mouth slightly open to allow water to drain into the sink.
4. Clean Thoroughly: Guide the water stream along your gumline, pausing briefly between teeth. Ensure you clean both the front and back surfaces of your teeth.
5. Stop Device: Press the power button again to turn off the device when finished.

Maintenance

Proper maintenance ensures the longevity and hygiene of your FlossJet Oral Irrigator:

• Cleaning the Water Tank: After each use, detach the water tank and empty any remaining water. Rinse the tank thoroughly with clean water. The open design facilitates easy cleaning to prevent residue buildup.
• Cleaning Jet Tips: Remove the jet tip after each use and rinse it under running water. For deeper cleaning, tips can be soaked in a denture cleaning solution or a mixture of water and white vinegar.
• Cleaning the Main Unit: Wipe the exterior of the main unit with a soft, damp cloth. Do not submerge the main unit in water, despite its IPX7 rating, to protect internal components.
• Charging: The device features a USB-C charging port. Connect the provided USB-C cable to charge. A full charge provides 14 to 21 days of use.

Troubleshooting

If you encounter any issues with your FlossJet Oral Irrigator, please refer to the following common solutions:

• Device not turning on: Ensure the device is fully charged. Connect it to the USB-C charger and allow sufficient time for charging.
• Weak water pressure: Check if the water tank is adequately filled. Ensure the selected cleaning mode is appropriate for your desired pressure. Clean the jet tip to remove any blockages.
• Water leakage: Verify that the water tank is securely attached and properly sealed. Ensure the jet tip is firmly inserted into the main unit.
• Device stops unexpectedly: The device may have a low battery. Recharge the unit. If the issue persists, contact customer support.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact FlossJet customer service directly. Keep your purchase receipt as proof of purchase.