Yawpet DT-72 Electric Dog Training Collar User Manual

Introduction

The Yawpet DT-72 Electric Dog Training Collar is designed to assist in humane and effective dog training. It offers multiple modes to help correct unwanted behaviors and reinforce positive ones. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and safety for your pet.

Key Features

• 4 Safe and Effective Training Modes: Includes Beep (standard), Vibration (1-3 levels), Shock (1-99 levels), and Shock Boost (10% higher).
• Remote Control with Security Lock: Prevents accidental activation and allows for easy indoor/outdoor training.
• Adjustable Collar: Fits all dog breeds and sizes with neck sizes from 8 to 25 inches and weights from 10-110 lbs. Made of soft and durable nylon for comfort.
• IPX7 Waterproof Receiver: Allows dogs to swim or play in the rain without damaging the collar.
• 4 Channel Support: Capable of training up to 4 dogs simultaneously.
• Fast-Charging & Long Battery Life: Fully charges in 2-3 hours. Receiver standby time up to 35 days, remote up to 45 days.
• Extended Remote Range: Operates effectively up to 2680 feet (approximately 817 meters).

Illustration of the four distinct training modes available on the Yawpet DT-72 collar system.

The remote control offers a wide range for training and includes a security lock to prevent accidental button presses.

Detailed view of the ergonomic design of the handheld remote and the receiver, highlighting various components and their functions.

Package Contents

Upon opening your Yawpet DT-72 package, you should find the following items:

• 1 x Remote Control
• 2 x Receiver Collars (Dark Blue)
• 1 x 2-in-1 Charging Cable
• Short and Long Contact Points
• Silicone Caps for Contact Points
• User Manual (this document)

The complete Yawpet DT-72 Dog Training Collar package, including the remote and two receiver collars.

Setup Guide

Charging the Devices

Before first use, fully charge both the remote control and the receiver collars. Use the provided 2-in-1 charging cable. The charging port for the remote is Type-C, and the receiver uses a magnetic charging port. A full charge typically takes 2-3 hours.

The 2-in-1 charging cable allows simultaneous charging of the remote and receiver collars, ensuring long battery life.

Adjusting the Collar

The collar strap is adjustable to fit various dog sizes. Ensure the contact points touch your dog's skin. For dogs with long fur, you may need to part the fur or use the longer contact points provided. The collar should be snug enough not to move around, but loose enough to allow one finger to fit comfortably between the strap and your dog's neck.

The adjustable collar accommodates dogs weighing 8-110 lbs, with options for long/short fur and a comfortable, durable nylon strap.

Pairing the Remote and Receiver

To pair the remote and receiver, simply turn both devices on. They are designed to automatically pair. Once paired, the remote's display will show the active channel and battery status.

Operating Modes

The Yawpet DT-72 offers four distinct training modes:

• Beep Mode: Emits an audible tone. This is often used as a warning or a positive reinforcement signal.
• Vibration Mode: Delivers a gentle vibration. Adjustable from 1 to 3 levels of intensity.
• Shock Mode: Provides a static stimulation. Adjustable from 1 to 99 levels of intensity. Start at the lowest level and increase gradually if necessary.
• Shock Boost: Delivers a static stimulation 10% higher than the current shock level. Use with caution and only when necessary.

To switch between modes and adjust intensity levels, refer to the buttons on the remote control as detailed in the 'Ergonomic Design' image in the Features section.

Important Considerations

• Collar Wear Duration: For your dog's comfort and to prevent skin irritation, it is recommended that the collar not be worn for more than 12 hours a day.
• Waterproof Design: The receiver collar is IPX7 waterproof, meaning it can withstand submersion in water up to 1 meter for 30 minutes. This allows your dog to enjoy water activities without concern for damaging the device.
• Remote-Activated Only: The collar does not activate automatically based on your dog's barking. All training modes (beep, vibration, shock) must be manually triggered by the remote control.

The IPX7 waterproof rating ensures the collar can be used during bathing, swimming, or in rainy conditions.

Product Specifications

Troubleshooting

If you encounter any issues with your Yawpet DT-72 training collar, please consider the following common solutions:

• No Response from Collar: Ensure both the remote and receiver are fully charged and powered on. Verify they are properly paired. Check if the security keypad lock on the remote is disengaged.
• Weak or Inconsistent Stimulation: Ensure the contact points are making proper contact with your dog's skin. You may need to trim your dog's fur or use the longer contact points. Adjust the intensity level on the remote.
• Short Battery Life: Ensure both devices are fully charged before use. Battery life can vary based on frequency of use and mode intensity.
• Remote Not Controlling Multiple Collars: Verify you are switching between the correct channels on the remote for each collar you wish to control. Each collar needs to be paired to a specific channel.

For persistent issues not resolved by these steps, please contact customer support.

Warranty Information

The Yawpet DT-72 Electric Dog Training Collar comes with a 2-Year Warranty. This warranty covers manufacturing defects and ensures free replacement for eligible issues. Please retain your proof of purchase for warranty claims.

Customer Support

For further assistance, technical support, or warranty claims, please contact Yawpet customer service through the retailer's platform or visit the official Yawpet store online. Our team is dedicated to providing prompt and helpful solutions.