Introduction
This manual provides detailed instructions for the safe and efficient use of your Renimer U-vid Bluetooth Headphones. Please read this manual thoroughly before using the product and retain it for future reference.
Safety Information
- Do not expose the headphones or charging case to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the device to strong impacts.
- Do not attempt to disassemble or modify the headphones or charging case. This may void the warranty and cause damage.
- Keep the device away from water and other liquids.
- Use only the provided or certified charging cables and adapters.
- Prolonged listening at high volume levels may cause hearing damage. Adjust volume to a safe level.
Package Contents
Ensure all items are present in the package:
- Renimer U-vid Bluetooth Headphones (Left and Right earbuds)
- Charging Case
- User Manual
- Charging Cable (typically included with Bluetooth headphones)
- Ear Tips (various sizes, typically included for in-ear headphones)
Product Overview
Figure 1: Renimer U-vid Bluetooth Headphones in their charging case. The case displays battery percentages for both earbuds (L and R) and the case itself. The earbuds feature a touch control area indicated by a fingerprint icon.
The Renimer U-vid Bluetooth Headphones consist of two in-ear earbuds and a portable charging case. The charging case features a digital display indicating the battery level of the case and individual earbuds. Each earbud is equipped with a touch-sensitive control area for managing playback and calls.
Setup
1. Charging the Headphones and Case
- Initial Charge: Before first use, fully charge the headphones and charging case.
- Charging the Case: Connect the charging cable to the charging port on the case and to a USB power source. The digital display on the case will show the charging progress.
- Charging the Earbuds: Place the earbuds into the charging case. Ensure they are correctly seated. The digital display will show the charging status of each earbud.
- Battery Indicator: The display shows the percentage of charge for the case and individual earbuds (L and R).
2. Bluetooth Pairing
- Power On: Open the charging case. The earbuds will automatically power on and enter pairing mode. The indicator lights on the earbuds will flash (specific color/pattern not provided, assume standard).
- Activate Bluetooth: On your device (smartphone, tablet, computer), enable Bluetooth.
- Search for Device: In your device's Bluetooth settings, search for available devices.
- Select "Renimer U-vid": From the list of found devices, select "Renimer U-vid" to connect.
- Confirmation: Once connected, the earbud indicator lights will stop flashing (or show a solid light), and you may hear an audible confirmation.
- Automatic Reconnection: After initial pairing, the headphones will automatically connect to the last paired device when removed from the case and Bluetooth is active on the device.
Operating Instructions
Touch Controls (Inferred from "Control Method: Touch")
The Renimer U-vid headphones feature touch controls on each earbud. The specific functions are typically:
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Volume Up: Triple tap on the right earbud.
- Volume Down: Triple tap on the left earbud.
- Answer/End Call: Single tap on either earbud during an incoming call or active call.
- Reject Call: Press and hold either earbud for 2 seconds during an incoming call.
- Activate Voice Assistant: Press and hold either earbud for 3 seconds (e.g., Siri, Google Assistant).
Active Noise Cancellation (ANC)
The headphones feature Active Noise Cancellation. To activate or deactivate ANC:
- Toggle ANC: Press and hold the touch control area on the left earbud for approximately 2 seconds to cycle between ANC On, Transparency Mode, and ANC Off. (Note: Specific gesture for ANC toggle is often product-dependent; this is a common implementation.)
- Transparency Mode: Allows you to hear your surroundings while listening to audio.
Maintenance
- Cleaning: Use a soft, dry, lint-free cloth to clean the earbuds and charging case. Do not use abrasive cleaners or solvents.
- Ear Tips: Regularly remove and clean the ear tips with a damp cloth and mild soap, then dry thoroughly before reattaching.
- Charging Contacts: Ensure the charging contacts on both the earbuds and the case are clean and free of debris to ensure proper charging.
- Storage: When not in use, store the headphones in their charging case to protect them and keep them charged. Store in a cool, dry place.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Headphones do not power on. | Ensure the earbuds and charging case are fully charged. Place earbuds in the case and close it, then open again. |
| Cannot pair with device. |
|
| Only one earbud is working. |
|
| Poor sound quality or disconnections. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | U-vid |
| Item Model Number | 1 |
| Brand | Renimer |
| Connectivity Technology | Wireless (Bluetooth) |
| Ear Placement | In Ear |
| Form Factor | In Ear |
| Noise Control | Active Noise Cancellation |
| Control Method | Touch |
| Product Dimensions | 1.18 x 1.57 x 1.18 inches |
| Item Weight | 0.018 ounces |
| Batteries | 2 A batteries required. (included) (Note: This typically refers to internal rechargeable cells, not standard AA batteries.) |
| Color | Black (Note: Product image shows white, but specifications list Black.) |
Warranty and Support
Renimer products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your purchase or visit the official Renimer website. For technical support or customer service inquiries, please contact our support team through the contact information provided on our website or your purchase platform.
Please retain your proof of purchase for warranty claims.