Tek Styz Bluetooth Portable Wireless Speaker Instruction Manual for Honor Magic6 RSR Porsche Design

Introduction

Thank you for choosing the Tek Styz Portable Bluetooth Wireless Speaker. This manual provides essential information for the safe and efficient use of your speaker. Designed for portability and high-quality audio, this speaker is compatible with various Bluetooth-enabled devices, including the Honor Magic6 RSR Porsche Design.

Please read this manual thoroughly before operating the device and retain it for future reference.

Safety Information

Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
Avoid dropping or subjecting the speaker to strong impacts.
Do not disassemble or attempt to repair the speaker yourself. This will void the warranty.
Keep the speaker away from water and other liquids.
Use only the provided MicroUSB charging cable. Do not use damaged cables or chargers.

Package Contents

Please check the package for the following items:

Tek Styz Portable Bluetooth Wireless Speaker (Model: G2 Pro TWS Speaker)
MicroUSB Charging Cable

Note: A USB wall adapter is not included. Please use a compatible USB charger (e.g., your mobile phone's charger) for power supply.

Product Overview

The Tek Styz Portable Bluetooth Wireless Speaker features a compact design with durable ABS plastic and a stylish fabric cover. It offers multiple playback options and a built-in microphone for hands-free calls.

Tek Styz Portable Bluetooth Speaker with icons for Bluetooth, Handfree phone call, TF card, FM Radio, and ABS+Fabric construction.

Image: Universal Mini-Speaker highlighting its features.

Key Features:

Bluetooth 4.2: Fast and stable wireless connection.
3 Watts Speaker Output: Clear and robust audio.
Built-in Microphone: For hands-free calling.
TWS (True Wireless Stereo) Pairing: Connect two speakers for stereo sound.
800mAh Battery: Provides up to 6+ hours of playtime.
Multiple Playback Modes: Bluetooth, USB, TF card, FM radio, Line input, Voice Command.
Easy Access Buttons: Intuitive controls for volume, play/pause, and mode switching.

Close-up of the Tek Styz speaker's side panel showing USB input, MicroSD/XC slot, MicroUSB charging port, and On/Off switch, along with control buttons on top.

Image: Speaker showing multiple inputs and control buttons.

Setup

1. Charging the Speaker

Connect the MicroUSB charging cable to the speaker's MicroUSB port.
Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
The charging indicator light will illuminate. It will turn off or change color once fully charged.

2. Power On/Off

To power on, slide the ON/OFF switch to the 'ON' position. You will hear a power-on prompt.
To power off, slide the ON/OFF switch to the 'OFF' position. You will hear a power-off prompt.

3. Bluetooth Pairing

Tek Styz Portable Bluetooth Speaker next to a smartphone displaying a Bluetooth connection screen.

Image: Speaker demonstrating compatibility with Bluetooth devices.

Ensure the speaker is powered on and in Bluetooth mode. If not, press the 'M' (Mode) button to switch to Bluetooth mode. The speaker will enter pairing mode, indicated by a flashing LED light and an audible prompt.
On your device (e.g., Honor Magic6 RSR Porsche Design), enable Bluetooth and search for available devices.
Select "Tek Styz Speaker" (or a similar name) from the list of found devices.
Once connected, the speaker will provide an audible confirmation, and the LED light will stop flashing.

4. TWS (True Wireless Stereo) Pairing (Optional)

If you have two Tek Styz G2 Pro TWS Speakers, you can pair them together for a stereo sound experience.

Multiple Tek Styz speakers in different colors, with text indicating 'Connect TWO/2 At Once for Stereo Surround Sound'.

Image: Multiple speakers illustrating TWS pairing capability.

Ensure both speakers are powered on and not connected to any Bluetooth device.
On one of the speakers (this will be the primary speaker), press and hold the 'M' (Mode) button for a few seconds until you hear a pairing tone, indicating it's searching for another speaker.
The two speakers will automatically connect to each other. You will hear a confirmation tone once TWS pairing is successful.
Now, connect your device to the primary speaker via Bluetooth as described in step 3. Audio will play through both speakers in stereo.

Operating Instructions

Basic Controls:

Play/Pause: Short press the ▶|| button to play or pause music.
Volume Up: Long press the + button.
Volume Down: Long press the - button.
Next Track: Short press the + button.
Previous Track: Short press the - button.
Mode Switch: Short press the 'M' button to cycle through Bluetooth, USB, TF Card, FM Radio, and Line Input modes.
Answering/Ending Calls: When a call comes in, short press the ▶|| button to answer. Short press again to end the call.
Voice Command: In Bluetooth mode, long press the 'M' button to activate your device's voice assistant (if supported).

Playback Modes:

Bluetooth Mode: After successful pairing, audio from your connected device will play through the speaker.
USB/TF Card Mode: Insert a USB drive or TF (MicroSD) card into the respective slot. The speaker will automatically detect and play audio files.
FM Radio Mode: Switch to FM mode using the 'M' button. Long press the ▶|| button to auto-scan and save available radio stations. Use the + and - buttons to navigate between saved stations.
Line Input Mode: Connect an audio device using a 3.5mm AUX cable (not included) to the speaker's line-in port. Switch to Line Input mode using the 'M' button.

Maintenance

Cleaning: Use a soft, dry cloth to wipe the speaker's surface. Do not use abrasive cleaners or solvents.
Storage: Store the speaker in a cool, dry place when not in use for extended periods.
Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use.

Troubleshooting

Problem	Possible Cause	Solution
Speaker does not turn on.	Low battery.	Charge the speaker fully.
Cannot pair via Bluetooth.	Speaker not in pairing mode; Bluetooth off on device; device too far.	Ensure speaker is in Bluetooth pairing mode. Turn on Bluetooth on your device. Move device closer to speaker (within 10 meters).
No sound.	Volume too low; incorrect mode; device not playing.	Increase speaker and device volume. Ensure correct playback mode is selected. Check if your device is playing audio.
Poor sound quality.	Interference; speaker too far from device; low battery.	Move speaker closer to device. Avoid obstacles. Charge the speaker.
TWS pairing fails.	Speakers not in TWS pairing mode; one speaker already connected to a device.	Ensure both speakers are powered on and disconnected from any device before initiating TWS pairing.

Specifications

Model: G2 Pro TWS Speaker
Brand: Tek Styz
Connectivity: Bluetooth 4.2
Speaker Output Power: 3 Watts
Battery Capacity: 800mAh
Playtime: Up to 6+ hours
Dimensions: 4.5 x 1.6 x 3 inches (11.4 x 4.1 x 7.6 cm)
Weight: 4 ounces (113 grams)
Material: ABS Plastic, Fabric, Aluminum, Metal, Stainless Steel
Impedance: 4 Ohms
Frequency Response: 48000 KHz
Compatible Devices: Android, Honor Magic6 RSR Porsche Design, iOS, Mac, Windows
Special Features: Built-in Microphone, TWS Pairing, Multiple Playback Modes (Bluetooth, USB, TF Card, FM, Line Input, Voice Command)

Warranty and Support

This Tek Styz product is covered by a manufacturer's warranty. Please refer to the product packaging or the official Tek Styz website for specific warranty terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact Tek Styz customer service through their official channels. Contact information can typically be found on the product packaging or the brand's website.

Tek Styz G2 Pro TWS Speaker