VGR Professional Hair Clipper and Trimmer Set (Models V-003 & V-906) User Manual

Product Overview

The VGR Professional Hair Clipper and Trimmer Set is designed for precise hair cutting and detailing. This kit includes the VGR 003 Professional Hair Clipper and the VGR 906 T-Blade Trimmer, offering versatile grooming solutions for both everyday use and professional barbering. Both devices feature cordless operation, USB recharging, and LED displays for battery status.

Key features include:

• VGR 003 Hair Clipper: Equipped with ceramic and powder metallurgy blades for long-lasting sharpness and reduced overheating. Supports two speed adjustments up to 9000 RPM. Includes 6 guide combs (1.5-12mm) and a taper lever for 5 length adjustments.
• VGR 906 T-Blade Trimmer: Features DLC-coated blades with a zero-gap design for ultra-fine trimming. Also reaches 9000 RPM for smooth and delicate grooming. Includes 3 limiting combs (1-3mm) for detailed work.
• LED Display: Shows real-time power level to prevent unexpected power cuts.
• Long Battery Life: Clipper offers up to 250 minutes run time from a 3-hour charge (2500mAh battery). Trimmer offers up to 240 minutes run time from a 2.5-hour charge (2000mAh battery).
• USB Charging: Supports both corded and cordless operation for convenience.
• Durable Design: Metal housing with a non-slip design for stable and comfortable grip.

Safety Information

Please read all safety instructions carefully before using the VGR Professional Hair Clipper and Trimmer Set. Failure to follow these instructions may result in injury or damage to the device.

• Always unplug and turn off the device before cleaning, maintenance, or storage.
• Keep the device out of reach of children.
• Do not use the device near water or in wet environments (e.g., bathtub, shower).
• Exercise caution when trimming near sensitive areas such as the face and eyes.
• Do not ingest or inhale small parts. Ensure all accessories are securely attached.
• Only use the provided USB charging cable and accessories.
• Do not disassemble or attempt to repair the device yourself. Contact customer support for assistance.
• Avoid dropping the device, as this may cause damage to the blades or internal components.

Setup and Charging

Before first use, ensure the device is fully charged.

1. Unpack: Carefully remove all components from the packaging and inspect for any damage. Ensure all accessories listed in the package contents are present.
2. Initial Charge: Connect the provided USB charging cable to the charging port on the clipper or trimmer. Plug the other end into a compatible USB power adapter (not included) or a USB port.
3. Monitor Charge: The LED display will indicate the charging status. For the hair clipper (V-003), a full charge takes approximately 3 hours, providing up to 250 minutes of run time. For the T-blade trimmer (V-906), a full charge takes approximately 2.5 hours, providing up to 240 minutes of run time.
4. Disconnect: Once fully charged, disconnect the device from the charging cable.

Image: VGR Hair Clipper (V-003) showing its USB charging port, LED display, and battery specifications (3 hours charge, 250 minutes work time).

Image: VGR T-Blade Trimmer (V-906) showing its USB charging port, LED display, and battery specifications (2.5 hours charge, 240 minutes work time).

Operating Instructions

Using the VGR 003 Hair Clipper

1. Attach Guide Comb: Select the desired guide comb (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm) and securely attach it to the clipper blade.
2. Adjust Taper Lever: Use the taper lever on the side of the clipper to fine-tune the cutting length between 0.5mm and 2.5mm. This allows for blending and precise length control.
3. Power On: Press the power button to turn on the clipper. The LED display will show the current battery level.
4. Select Speed: The clipper offers two speed settings. Press the power button again to switch between speeds (up to 9000 RPM) to suit different hair textures and cutting needs.
5. Begin Trimming: Guide the clipper through the hair against the direction of hair growth for an even cut. Use smooth, overlapping strokes.
6. Power Off: After use, turn off the clipper by pressing the power button.

Image: VGR Hair Clipper (V-003) highlighting the adjustable taper lever for precise cutting lengths and various guide combs.

Using the VGR 906 T-Blade Trimmer

1. Attach Limiting Comb: For specific lengths, attach one of the limiting combs (1mm, 2mm, 3mm) to the T-blade. For zero-gap trimming, use without a comb.
2. Power On: Press the power button to activate the trimmer. The LED display will show the battery level.
3. Select Speed: The trimmer also features two speed settings, reaching up to 9000 RPM. Adjust as needed for desired precision and comfort.
4. Begin Trimming: Use the T-blade for outlining, detailing, and creating sharp lines around the neckline, beard, and sideburns. For zero-gap trimming, gently press the blade against the skin.
5. Power Off: Turn off the trimmer after completing your grooming.

Image: VGR T-Blade Trimmer (V-906) showcasing its DLC-coated blade and LED display.

Maintenance and Cleaning

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your VGR grooming set.

1. Turn Off and Unplug: Always ensure the clipper/trimmer is turned off and unplugged from the charger before cleaning.
2. Remove Guide Combs: Detach any guide or limiting combs from the blades.
3. Brush Away Hair: Use the provided cleaning brush to gently brush away any loose hair from the blades and the inside of the device.
4. Lubricate Blades: Apply a small drop of the provided lubricant oil to the blades after each use or as needed. Turn on the device for a few seconds to distribute the oil evenly. This helps maintain blade sharpness and reduces friction.
5. Wipe Body: Wipe the body of the device with a clean, dry cloth. Do not use abrasive cleaners or immerse the device in water.
6. Store Properly: After cleaning, attach the blade protective cap and store the devices in a dry, safe place, away from moisture and extreme temperatures.

Image: The VGR grooming set including the hair clipper, trimmer, various guide combs, cleaning brush, and lubricant oil, essential for maintenance.

Specifications

Warranty and Support

VGR products are manufactured with quality and durability in mind. This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects.

For technical support, warranty claims, or any questions regarding your VGR Professional Hair Clipper and Trimmer Set, please contact VGR customer service. Support is available 24 hours a day.

Please retain your proof of purchase for warranty validation.

Image: VGR customer support information, indicating 1-year warranty and 24-hour support availability.