VGR Professional Hair Clipper and Trimmer Set User Manual

1. Introduction

Thank you for choosing the VGR Professional Hair Clipper and Trimmer Set. This comprehensive kit includes the VGR 003 Professional Hair Clipper and the VGR 906 T-Blade Trimmer, designed for both professional barbers and home users. This manual provides essential information for safe operation, maintenance, and optimal performance of your grooming tools. Please read it thoroughly before first use and keep it for future reference.

Figure 1: VGR Professional Hair Clipper and Trimmer Set, including the VGR 003 Clipper, VGR 906 Trimmer, various guide combs, cleaning brush, lubricant oil, USB charging cables, and a barber cape.

2. Safety Information

To ensure safe operation and prevent injury or damage, please adhere to the following safety precautions:

• Unplug Before Cleaning: Always unplug or turn off the device before cleaning, maintenance, or storage.
• No Charging While Using: Do not use the device while it is charging.
• Keep Away from Water: Do not immerse the devices in water or use them near water sources (e.g., bathtubs, showers, sinks). If the device falls into water, do not reach for it. Unplug immediately.
• Avoid Heat Sources: Keep the devices away from direct sunlight, heat sources, and high temperatures.
• Handle with Caution: Use the device with caution, especially around sensitive areas like the face and eyes.
• Keep Out of Reach of Children: This product is not a toy. Store it in a safe place away from children.
• Follow Instructions: Always follow the instructions provided in this manual for safe use and proper disposal.
• Use Original Accessories: Only use accessories and attachments supplied or approved by VGR.
• Inspect Before Use: Before each use, inspect the blades and device for any damage. Do not use if damaged.

3. Package Contents

Your VGR Professional Hair Clipper and Trimmer Set includes the following items:

• 1 x VGR 003 Professional Hair Clipper
• 1 x VGR 906 T-Blade Trimmer
• 6 x Hair Clipper Guide Combs (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm)
• 3 x Hair Trimmer Guide Combs (1mm, 2mm, 3mm)
• 2 x USB Charging Cables (one for each device)
• 2 x Blade Protective Caps
• 1 x Cleaning Brush
• 1 x Lubricant Oil Bottle
• 1 x Barber Cape
• 1 x User Manual

Figure 2: Visual representation of the VGR Hair Clipper and Trimmer Set contents, showing both devices, various guide combs, and maintenance accessories.

4. Product Features

The VGR Professional Hair Clipper and Trimmer Set offers advanced features for a superior grooming experience:

• Professional Barber Clipper (VGR 003): Equipped with ceramic and powder metallurgy blades for long-lasting sharpness and reduced heat. Features a taper lever for precise length adjustments (0.5mm to 2.5mm) and supports two speed settings up to 9000 RPM.
• Zero Gap T-Blade Trimmer (VGR 906): Features DLC-coated blades for ultra-fine trimming and a smooth finish. Ideal for detailing, beard shaping, and sideburns. Also reaches a high performance of 9000 RPM.
• LED Display: Both devices feature an intuitive LED display that shows the real-time power level, ensuring you are aware of the battery status.
• Long-Lasting Battery Life:
  • VGR 003 Clipper: 2500mAh battery, up to 250 minutes run time on a 3-hour charge.
  • VGR 906 Trimmer: 2000mAh battery, up to 240 minutes run time on a 2.5-hour charge.
• 9 Guide Combs: Includes 6 guide combs for the clipper (1.5-12mm) and 3 for the trimmer (1-3mm) to achieve various hair lengths and styles.
• Convenient USB Charging: Supports both corded and cordless operation, allowing for flexible use and easy charging via USB.
• Durable Metal Housing: Non-slip metal casing provides a stable and comfortable grip, ensuring durability and professional feel.

Figure 3: Key features of the VGR 003 Hair Clipper, highlighting its adjustable taper lever, durable and sharp blades, extended battery life, and LED power display.

Figure 4: Key features of the VGR 906 T-Blade Trimmer, emphasizing its ceramic blade, sharp and durable cutting performance, long work time, and LED power display.

Figure 5: Detailed view of the VGR 003 Clipper's adjustable features, including two-speed settings, adjustable blade length from 0.5mm to 2.5mm, and its convenient USB-C charging port.

Figure 6: Detailed view of the VGR 906 Trimmer's features, including two-speed settings, the durable DLC T-Blade, and its convenient USB-C charging port.

5. Setup and Initial Charge

Before first use, it is recommended to fully charge both the hair clipper and trimmer.

1. Unpack: Carefully remove all components from the packaging.
2. Inspect: Check both devices and accessories for any signs of damage.
3. Initial Charge:
   • Connect the provided USB charging cable to the charging port on each device.
   • Plug the other end of the USB cable into a compatible USB power adapter (not included) or a computer USB port.
   • The LED display will indicate the charging status. For the VGR 003 Clipper, a full charge takes approximately 3 hours. For the VGR 906 Trimmer, a full charge takes approximately 2.5 hours.
   • Once fully charged, disconnect the devices from the charging cable.
4. Lubricate Blades: Before the first use and after every cleaning, apply a few drops of the included lubricant oil to the blades. Turn on the device for a few seconds to distribute the oil evenly.

Figure 7: The USB charging port of the VGR 003 Hair Clipper, illustrating its 3-hour charge time for 250 minutes of work time.

Figure 8: The USB charging port of the VGR 906 T-Blade Trimmer, illustrating its 2.5-hour charge time for 240 minutes of work time.

6. Operating Instructions

This section details how to use your VGR hair clipper and trimmer for various grooming needs.

6.1 Attaching Guide Combs

Select the appropriate guide comb for your desired hair length. The clipper comes with 6 combs (1.5-12mm) and the trimmer with 3 combs (1-3mm).

1. Ensure the device is turned off.
2. Align the guide comb with the blade and push it firmly until it clicks into place.
3. To remove, gently pull the comb away from the blade.

6.2 Using the VGR 003 Hair Clipper

1. Power On: Press the power button to turn on the clipper. The LED display will show the battery level.
2. Adjust Speed: If available, press the power button again to cycle through different speed settings (up to 9000 RPM).
3. Adjust Taper Lever: Use the taper lever on the side of the clipper to fine-tune the cutting length between 0.5mm and 2.5mm without changing guide combs.
4. Clipping Hair: Hold the clipper with the blade flat against the head. Move the clipper slowly against the direction of hair growth. For best results, work in small sections.
5. Power Off: Press the power button to turn off the clipper after use.

6.3 Using the VGR 906 T-Blade Trimmer

1. Power On: Press the power button to turn on the trimmer. The LED display will show the battery level.
2. Trimming/Detailing: Use the T-blade for precise lines, edging, and detailing around the neckline, beard, and sideburns. The zero-gap design allows for very close cuts.
3. Power Off: Press the power button to turn off the trimmer after use.

7. Maintenance and Cleaning

Regular cleaning and maintenance will prolong the life of your VGR grooming tools.

1. Turn Off and Unplug: Always ensure the device is turned off and unplugged from any charging source before cleaning.
2. Remove Guide Comb: Detach any attached guide comb.
3. Clean Blades: Use the provided cleaning brush to brush away hair clippings from the blades and the area around the blades.
4. Lubricate Blades: After cleaning, apply 2-3 drops of the included lubricant oil evenly across the blades. Turn on the device for a few seconds to allow the oil to spread. This helps maintain blade sharpness and smooth operation.
5. Wipe Body: Wipe the body of the clipper and trimmer with a clean, dry cloth. Do not use abrasive cleaners or immerse the devices in water.
6. Storage: Store the devices and all accessories in a dry, cool place, away from direct sunlight and moisture. Use the blade protective caps when storing.

8. Troubleshooting

If you encounter any issues with your VGR Hair Clipper and Trimmer Set, please refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

VGR stands behind the quality of its products. For warranty information and customer support, please refer to the details below:

• Warranty: The product typically comes with a 1-year warranty. Please refer to the warranty card included in your package or contact VGR customer service for specific terms and conditions.
• Customer Support: For any questions, technical assistance, or warranty claims, please contact VGR customer support.
  • Support is generally available 24 hours.
  • Visit the official VGR website or the seller's page on Amazon for contact details.

Figure 9: VGR customer support details, indicating a 1-year warranty and 24-hour support availability.