Onerbl AC-DC Adapter User Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your Onerbl AC-DC Adapter. This adapter is specifically designed to power and charge compatible devices, such as the CAT Cube PPSCL3 1750A 4-in-1 Portable Jump Starter Power Station. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

• Compatibility: Ensure the adapter is compatible with your device's voltage and current requirements. This adapter is designed for devices requiring 5V DC input for charging. Note: The 11.1V rating on your jump starter refers to its internal battery voltage, not the required charger input voltage.
• Power Source: Connect the adapter only to a standard 120V AC electrical outlet.
• Environment: Use the adapter in a dry environment. Avoid exposure to water, moisture, or extreme temperatures.
• Damage: Do not use the adapter if the cord or plug is damaged. Do not attempt to open or repair the adapter.
• Ventilation: Ensure adequate ventilation around the adapter during use to prevent overheating.
• Children: Keep the adapter out of reach of children.

3. Package Contents

Your Onerbl AC-DC Adapter package includes:

• 1 x Onerbl AC-DC Adapter

Image: The Onerbl AC-DC Adapter, featuring a black casing and a USB-C output connector. This adapter is used to convert standard wall outlet power to the appropriate voltage for charging compatible devices.

4. Setup

1. Inspect: Before connecting, visually inspect the adapter and its cable for any signs of damage.
2. Connect to Device: Plug the USB-C connector of the Onerbl adapter into the designated USB-C charging port on your CAT Cube PPSCL3 1750A Jump Starter Power Station.
3. Connect to Power Outlet: Insert the AC plug of the adapter into a standard 120V AC wall outlet.

5. Operating Instructions

Once connected, the Onerbl AC-DC Adapter will begin supplying power to your device. If connected to a rechargeable device like the CAT Cube Jump Starter, it will initiate the charging process.

• Charging Indication: Refer to your device's user manual for specific charging indicators (e.g., LED lights, screen display) to confirm that it is receiving power and charging correctly.
• Charging Time: Charging times will vary depending on the device's battery capacity and current charge level.
• Disconnecting: To disconnect, first unplug the adapter from the wall outlet, then disconnect the USB-C cable from your device.

6. Maintenance

• Cleaning: Clean the adapter with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Storage: Store the adapter in a cool, dry place when not in use. Avoid wrapping the cable too tightly.
• Inspection: Periodically inspect the adapter and cable for any signs of wear or damage.

7. Troubleshooting

• Device Not Charging:
  • Ensure the adapter is securely plugged into both the wall outlet and the device.
  • Verify the wall outlet is functional by testing it with another appliance.
  • Important Note: If your device's rechargeable battery is old or dead (typically lasting 1 to 3 years), it may no longer accept a charge. This is a battery issue, not an adapter malfunction. A voltmeter can be used to confirm if the adapter is outputting power.
• Adapter Overheating: Disconnect the adapter immediately. Ensure it is used in a well-ventilated area and not covered. If overheating persists, discontinue use.

8. Specifications

9. Warranty

Onerbl products are manufactured with quality materials and tested for performance. This adapter comes with a limited warranty against defects in materials and workmanship under normal use. Please refer to the product packaging or contact the manufacturer for specific warranty terms and conditions.

10. Support

For technical assistance, troubleshooting, or warranty inquiries, please contact the manufacturer, Shenzhen Waweis Technology Co., Ltd, or your product retailer. Please have your product model and purchase information available when contacting support.