VGR V-360 Professional Blade Shaver User Manual

Introduction

Thank you for choosing the VGR V-360 Professional Blade Shaver. This manual provides essential information for the safe and effective use of your new grooming device. Please read it thoroughly before first use and retain it for future reference.

Image: The VGR V-360 Professional Blade Shaver, including the main unit, adjustable guide comb, USB charging cable, cleaning brush, and lubricating oil, presented with its retail packaging.

Safety Information

WARNING: To reduce the risk of electric shock, injury, or damage, always follow these basic safety precautions:

• This appliance is suitable for use by individuals aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, provided they have been given supervision or instruction concerning the safe use of the appliance and understand the hazards involved.
• Children should be supervised to ensure they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Do not immerse the charging cable or adapter in water or other liquids.
• Always unplug the shaver from the power outlet immediately after charging and before cleaning.
• Do not use the shaver if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged.
• Keep the shaver away from heated surfaces.
• Use this product only for its intended household use as described in this manual.

Package Contents

Upon unpacking, please ensure all items listed below are present and in good condition:

• VGR V-360 Professional Blade Shaver Unit
• Dual-Sided Trimmer Head (integrated)
• Adjustable Guide Comb (0.1-9mm, 19 lengths)
• USB Charging Cable
• Cleaning Brush
• Lubricating Oil
• User Manual

Image: A comprehensive view of the VGR V-360 Professional Blade Shaver and its accompanying accessories, including the adjustable guide comb, USB charging cable, cleaning brush, and lubricating oil.

Setup and Initial Charging

1. Initial Charge

1. Before first use, fully charge the shaver. Connect the USB charging cable to the shaver's charging port and plug the other end into a compatible USB power adapter (not included) or a computer USB port.
2. The LED display will show the battery percentage during charging. A full charge takes approximately 1.5 hours.
3. Once fully charged, the LED display will indicate 100%. Disconnect the shaver from the charging cable.

2. Attaching the Guide Comb

• To attach the adjustable guide comb, align the comb with the shaver head and gently push it until it clicks into place.
• To adjust the cutting length, rotate the dial on the guide comb to select your desired length from 0.1mm to 9mm.
• To remove the guide comb, gently pull it away from the shaver head.

Operating Instructions

1. Powering On/Off

• Press the power button located on the front of the shaver to turn it on. The LED display will illuminate, showing the battery percentage.
• Press the power button again to turn the shaver off.

Image: The VGR V-360 Professional Blade Shaver displaying its power button and LED screen, which indicates battery level and operational status.

2. Shaving and Trimming

The VGR V-360 can be used for both wet and dry shaving. Its IPX6 waterproof rating allows for use in the shower.

• For Shaving: Ensure the shaver head is clean. Place the blade flat against your skin and move it gently against the direction of hair growth for a close shave. Avoid applying excessive pressure.
• For Trimming: Attach the adjustable guide comb and select your desired length. Move the shaver against the direction of hair growth, ensuring the comb maintains even contact with the skin.
• The dual-sided trimmer allows for precise edging and contouring.

Image: An illustrative diagram detailing the VGR V-360's main features, including its dual-sided trimmer for precision, IPX6 waterproof design for easy cleaning, clear LED display for status, and user-friendly ON/OFF button.

Maintenance and Cleaning

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your shaver.

1. Cleaning After Each Use

1. Turn off the shaver and disconnect it from any charging cable.
2. Remove the guide comb (if attached).
3. Rinse the shaver head and blades under running water. The IPX6 waterproof design allows for easy cleaning.
4. Use the provided cleaning brush to remove any stubborn hair particles from the blades and inside the shaver head.
5. Shake off excess water and allow the shaver head to air dry completely before reattaching the comb or storing.

Image: Two VGR V-360 Professional Blade Shavers, highlighting their IPX6 waterproof rating, indicating they are fully washable under running water for easy cleaning.

2. Lubrication

• Periodically, apply a small drop of the provided lubricating oil to the blades. This helps maintain blade sharpness and smooth operation.
• Turn on the shaver for a few seconds to distribute the oil evenly.

3. Storage

• Store the shaver in a cool, dry place, away from direct sunlight and extreme temperatures.
• Ensure the shaver is clean and dry before storing.

Troubleshooting

Specifications

Warranty Information

The VGR V-360 Professional Blade Shaver comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or failure to follow the instructions in this manual.

Please retain your proof of purchase for warranty claims.

Customer Support

For any questions, concerns, or technical assistance regarding your VGR V-360 Professional Blade Shaver, please contact VGR customer support:

• Email: customercare@vgrofficial.in
• Phone: 18002578939
• Website: www.vgrofficial.in
• Operating Hours: 10:00 AM to 6:00 PM, Monday to Saturday (IST)

Manufacturer: Ningbo VGR Electric Appliance Co., Ltd.