1. Introduction
Thank you for choosing the VGR V-674 Professional Hair Clipper. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new hair clipper. Please read it thoroughly before first use and keep it for future reference.
2. Safety Instructions
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Do not immerse the clipper in water or use it near water sources.
- Keep the appliance away from heat sources and direct sunlight.
- Only use the provided charging cable and base.
- Ensure the clipper is switched off before cleaning or performing maintenance.
- Do not use the clipper if the blades are damaged, as this may cause injury.
3. Package Contents
The VGR V-674 Professional Hair Clipper package includes the following items:
- 1x VGR V-674 Hair Clipper
- 4x Guide Combs (3mm, 6mm, 9mm, and 12mm)
- 1x Lubricating Oil
- 1x Cleaning Brush
- 1x USB Charging Cable
- 1x Charging Base
- 1x User Manual
Image: VGR V-674 Hair Clipper with included guide combs, charging base, and USB cable.
4. Product Overview
The VGR V-674 is a professional-grade hair clipper designed for precision and durability. Key features include:
- Precision Blades: Ceramic and DLC-coated blades for sharp, smooth cutting.
- Powerful Motor: 9000 RPM Vector Motor for consistent performance.
- Long Battery Life: 3000mAh lithium battery providing up to 120 minutes of runtime.
- LED Display: Shows battery life and oiling indicators.
- Adjustable Cutting Lengths: Integrated taper lever and four guide combs (3/6/9/12mm) for versatile styling.
- USB Charging: Convenient charging via USB cable or charging base.
Image: The VGR V-674 Hair Clipper positioned on its charging base, showcasing the LED display.
5. Setup
5.1 Initial Charging
- Before first use, fully charge the hair clipper for approximately 4 hours.
- Connect the USB charging cable to the charging base and plug it into a suitable USB power adapter (not included) or a USB port.
- Place the clipper onto the charging base. The LED display will indicate charging status.
5.2 Attaching Guide Combs
- Ensure the clipper is switched off.
- Select the desired guide comb (3mm, 6mm, 9mm, or 12mm).
- Align the comb with the clipper blade and push it firmly until it clicks into place.
- To remove, gently pull the comb away from the blade.
6. Operating Instructions
- Prepare Hair: Ensure hair is clean and dry. Comb the hair to remove any tangles.
- Select Length: Attach the appropriate guide comb for your desired hair length. For finer adjustments, use the integrated taper lever on the side of the clipper.
- Power On: Press the on/off switch to turn on the clipper. The LED display will show the current battery level.
- Begin Trimming: Hold the clipper with the blades pointing downwards. Trim in the natural direction of hair growth, using smooth, even strokes.
- Monitor Battery: Keep an eye on the LED display for battery life. Recharge when indicated.
- Power Off: Once finished, press the on/off switch to turn off the clipper.
7. Maintenance
7.1 Cleaning the Blades
- Ensure the clipper is switched off and unplugged from the charging base.
- Use the provided cleaning brush to remove any loose hairs from the blades and the clipper body.
- For a more thorough clean, the blades can be rinsed under running water. Ensure the clipper body remains dry. Allow blades to air dry completely before reattaching or storing.
7.2 Lubricating the Blades
- After cleaning and drying, apply 1-2 drops of the provided lubricating oil to the blades.
- Turn on the clipper for a few seconds to distribute the oil evenly.
- Wipe off any excess oil with a soft cloth.
- The LED display will indicate when oiling is recommended.
7.3 Battery Care
- To prolong battery life, avoid completely draining the battery before recharging.
- Store the clipper in a cool, dry place when not in use.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clipper does not turn on. | Battery is depleted. | Charge the clipper for 4 hours. |
| Poor cutting performance. | Blades are dull or clogged with hair. | Clean and oil the blades. If blades are dull, consider replacement. |
| Clipper makes unusual noise. | Blades require lubrication. | Apply lubricating oil to the blades. |
| Clipper gets hot during use. | Extended use or lack of lubrication. | Allow the clipper to cool down. Ensure blades are clean and oiled. |
9. Specifications
- Model: V-674 Professional
- Blade Material: Ceramic and DLC Coated Blades
- Motor: 9000 RPM Vector Motor
- Battery Type: 3000mAh Lithium Battery
- Runtime: Up to 120 minutes
- Charge Time: Approximately 4 hours
- Power Source: Battery Powered (USB Charging)
- Product Dimensions: 17.8 x 6.3 x 4.4 cm
- Item Weight: 331 g
10. Warranty and Support
For warranty information, technical support, or any inquiries regarding your VGR V-674 Professional Hair Clipper, please contact:
- Email: customercare@vgrofficial.in
- Phone: 18002578939
- Website: www.vgrofficial.in
Support hours are from 10:00 AM to 6:00 PM, Monday to Saturday.
