Voyager A12VGCLU241

Voyager Bluey 12V Electric Go Kart User Manual

Model: A12VGCLU241

1. Introduction

Thank you for purchasing the Voyager Bluey 12V Electric Go Kart. This manual provides essential information for the safe assembly, operation, and maintenance of your new ride-on toy. Please read all instructions carefully before use and retain this manual for future reference. This product is designed for children aged 3 to 6 years.

2. Safety Information

WARNING: Use as Directed. Adult supervision is required at all times.

Voyager Bluey 12V Electric Go Kart

Image 2.1: The Voyager Bluey 12V Electric Go Kart, ready for use.

3. Package Contents

Please check the package contents to ensure all parts are present:

4. Assembly and Setup

Assembly typically requires a Phillips head screwdriver and takes approximately 30-60 minutes. Follow these general steps:

  1. Attach Wheels: Securely attach all four wheels to the axles using the provided fasteners.
  2. Install Steering Wheel: Connect the steering wheel to the steering column, ensuring it clicks into place or is fastened according to specific instructions.
  3. Connect Battery: Locate the battery compartment, typically under the seat. Connect the battery terminals (red to red, black to black).
  4. Attach Flag: Insert the Australian flag accessory into its designated slot at the rear of the go-kart.
Front view of Bluey Go Kart with specifications

Image 4.1: Front view of the go-kart highlighting key features like the 12V rechargeable battery, 4 mph max speed, rear drift wheels, and recommended age range of 3-7 years.

5. Charging the Battery

The go-kart is powered by a 12V rechargeable battery. For optimal performance and battery life, follow these charging instructions:

  1. Initial Charge: Before first use, charge the battery for a full 10-12 hours. Do not overcharge for more than 18 hours.
  2. Regular Charging: After each use, recharge the battery for 8-10 hours.
  3. Charging Port: Locate the charging port, usually near the battery compartment or on the dashboard. Plug the charger into the port and then into a standard wall outlet.
  4. Indicator: The charger may have an indicator light to show charging status (e.g., red for charging, green for fully charged).
  5. Safety: Always charge the battery in a dry, well-ventilated area. Do not allow children to handle the charger or battery.

6. Operating Instructions

Familiarize yourself with the controls before allowing a child to operate the go-kart.

6.1. Controls

Close-up of the Forward/Reverse switch and power button

Image 6.1: Detail of the Forward/Reverse switch and power button for intuitive control.

Close-up views of the go-kart's features: seat belt, MP3 jack, vibrant lights, and comfortable seating

Image 6.2: Detailed view of the reliable seat belt, MP3 jack, vibrant front lights, and comfortable seating area.

6.2. Driving the Go Kart

  1. Ensure the child is seated properly and the seat belt is fastened.
  2. Turn on the power switch.
  3. Select 'Forward' or 'Reverse' using the switch.
  4. Press the foot pedal to move. Release the pedal to stop.
  5. Steer using the steering wheel.
Side view of the Bluey Go Kart on various surfaces

Image 6.3: The go-kart is suitable for operation on various surfaces including concrete, tile, asphalt roads, and wood floors.

7. Maintenance

Regular maintenance ensures the longevity and safe operation of your go-kart.

8. Troubleshooting

If you encounter issues, refer to this section before contacting support.

ProblemPossible CauseSolution
Go-kart does not moveBattery is low or not connected; Power switch is off; Forward/Reverse switch is in neutral position; Loose wire connection.Charge the battery; Turn on the power switch; Select Forward or Reverse; Check all wire connections.
Go-kart moves slowlyBattery is low; Overloaded; Operating on an uneven surface.Recharge the battery; Reduce weight; Move to a flat, smooth surface.
Lights not workingLoose wire connection; Damaged bulb/LED.Check wire connections to the lights; Contact customer support if damaged.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or contact the manufacturer, Sakar International, directly. Keep your proof of purchase for any warranty claims.

For further assistance, you may visit the Voyager Store on Amazon.

Related Documents - A12VGCLU241

Preview Voyager Hover Beats Balance E-Scooter User Manual
Comprehensive user manual for the Voyager Hover Beats Balance E-Scooter, covering safety precautions, specifications, charging, calibration, operation, and warranty information.
Preview Voyager Radius Pro Electric Bike User's Manual
Comprehensive user's manual for the Voyager Radius Pro Electric Bike (model BIKE4050RP). Covers safety precautions, assembly, operation, maintenance, specifications, FCC compliance, and warranty information.
Preview Voyager VBSD1A Blind Spot Detection System Manual
This manual provides installation, operation, and troubleshooting information for the Voyager VBSD1A Blind Spot Detection System. It details system limitations, part lists, wiring diagrams, and safety precautions.
Preview Voyager VYCDVD7/VYCDVD9 Portable DVD Player Instruction Manual
This instruction manual provides detailed guidance on operating the Voyager VYCDVD7 and VYCDVD9 portable DVD players, covering setup, features, specifications, and troubleshooting.
Preview Voyager WVSXM43 Digital Wireless Observation Monitor User Manual
User manual for the Voyager WVSXM43 Digital Wireless Observation Monitor, featuring WiSight 2.0 technology. Learn about installation, operation, pairing, button functions, and troubleshooting.
Preview Voyager WVSXC150 Digital Wireless Color CMOS Camera Installation and Specifications
This document provides installation instructions and technical specifications for the Voyager WVSXC150 Digital Wireless Color CMOS Camera, featuring WiSight 2.0 technology. It includes details on mounting, wiring, and product features.