OVE Decors Bel 48-inch W x 81-inch H Frameless Sliding Shower Door Alcove Kit Instruction Manual

Introduction

Welcome to your new OVE Decors Bel shower door kit. This manual provides essential information for the safe installation, operation, and maintenance of your frameless sliding shower door and alcove kit. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Safety Information

• Always wear safety glasses during installation to protect your eyes.
• Handle glass panels with extreme care. Tempered glass can shatter if struck on the edge or if its surface is scratched.
• Ensure the installation surface (walls and floor) is structurally sound, level, and plumb to support the weight of the shower kit.
• If you are unsure about any step or encounter difficulties, consult a qualified professional installer.
• Keep all small parts and hardware out of reach of children.
• Do not use power tools on glass components.

Package Contents

Key Components:

• Frameless Sliding Shower Door (approx. 78-3/4-inch H)
• Side Panel (30-5/16-inch W x 78.75-inch H, 5/16-inch (8mm) thick tempered glass)
• Shower Base (Included)
• Matte Black Hardware Kit (includes rolling mechanism, oversized bar handles, stainless steel corner top bar, and fasteners)
• Installation Guide (This manual)

Verify all parts are present and undamaged before beginning installation. Contact customer support immediately if any parts are missing or damaged.

Tools Required (Not Included)

• Measuring Tape
• Level
• Electric Drill
• Phillips and Flathead Screwdrivers
• Caulking Gun and Waterproof Silicone Sealant
• Pencil or Marker
• Safety Glasses
• Utility Knife
• Stud Finder (recommended)

Setup and Installation

Pre-Installation Checklist:

• Read all instructions thoroughly before starting.
• Ensure the alcove space is prepared and dimensions match the shower kit (designed for a 48-inch wide alcove).
• Confirm the floor is level and the walls are plumb and structurally sound.
• Have all necessary tools and components ready and easily accessible.

Installation Steps:

1. Shower Base Installation: Install the included shower base according to its specific instructions. Ensure it is level, properly secured, and sealed to the subfloor and walls to prevent leaks.
2. Side Panel Placement: If converting to a 32-inch deep corner shower, position the frameless side panel (30-5/16-inch W x 78.75-inch H, 5/16-inch (8mm) thick tempered glass) as per the detailed diagrams in the separate installation guide. Secure it using the provided hardware.
3. Hardware Mounting: Mount the matte black hardware, including the rolling mechanism system, to the wall and shower base/side panel. The design is reversible, allowing for left or right-hand installation of the sliding door. Follow the specific measurements and drilling instructions provided.
4. Sliding Door Installation: Carefully lift and attach the frameless sliding shower door (78-3/4-inch high) to the installed rolling mechanism. The premium engineered rolling mechanism features soft-close technology for smooth operation. Ensure the door is properly aligned and moves freely.
5. Handle Attachment: Install the oversized 23-5/8 inch long vertical matte black bar handles on the interior and exterior of the sliding door.
6. Corner Top Bar: Install the stainless steel corner top bar for added support, connecting the side panel and the main door frame/track.
7. Sealing: Apply a continuous bead of waterproof silicone sealant along all seams and edges where the shower kit meets the walls and shower base to ensure a watertight enclosure. Allow adequate drying time (typically 24-48 hours) before using the shower.

Image: The OVE Decors Bel Frameless Sliding Shower Door and Side Panel installed in a modern bathroom, showcasing the matte black hardware and clear glass.

Operating Instructions

The OVE Decors Bel shower door features a premium engineered rolling mechanism with soft-close technology. To open or close the door, gently slide it along the track using the oversized vertical bar handles. The soft-close mechanism will engage automatically near the end of the travel to ensure a quiet and smooth operation, preventing abrupt impacts.

Maintenance

Cleaning the Glass:

• Clean glass panels regularly with a soft cloth and a non-abrasive, ammonia-free glass cleaner.
• Avoid using harsh chemicals, abrasive cleaners, scouring pads, or sharp objects, as these can scratch the glass or damage its protective coating.
• For best results and to prevent water spot buildup, wipe down the glass after each use with a squeegee or soft cloth.

Cleaning the Hardware:

• Wipe matte black hardware components with a soft, damp cloth.
• Do not use abrasive cleaners, solvents, or acidic cleaning agents on the matte black finish, as this can damage the protective coating and appearance.

Checking Seals:

• Periodically inspect all seals, gaskets, and silicone caulking for signs of wear, cracking, or damage.
• Reapply waterproof silicone sealant as needed to maintain a watertight enclosure and prevent leaks.

Troubleshooting

Issue: Door does not slide smoothly.

• Solution: Check the rolling mechanism and track for any obstructions (e.g., debris, soap scum). Clean the track and rollers thoroughly. Ensure the track is level and properly aligned.

Issue: Water leakage from the shower enclosure.

• Solution: Inspect all silicone seals and caulking around the shower base and wall connections. Reapply sealant where necessary, ensuring a continuous, watertight barrier. Verify that the shower base is properly installed and sealed.

Issue: Door does not close completely or align properly.

• Solution: Verify that the soft-close mechanism is functioning correctly and that there are no obstructions preventing full closure. Check the door alignment on the track and adjust as per installation instructions if needed. Ensure the walls are plumb.

Specifications

Warranty Information

For detailed warranty information regarding your OVE Decors Bel shower door kit, please refer to the warranty card included with your purchase or visit the official OVE Decors website. Keep your proof of purchase for any warranty claims.

Customer Support

If you have any questions, require assistance with installation, or need to report missing or damaged parts, please contact OVE Decors customer support. Contact details can typically be found on the product packaging, the official OVE Decors website, or within the warranty documentation.