1. Introduction
Thank you for choosing the Tribesigns Height Adjustable Overbed Table. This versatile and ergonomic table is designed to enhance comfort and productivity while in bed, offering features such as adjustable height, a tiltable board, and integrated charging ports. This manual provides essential information for the safe assembly, operation, and maintenance of your new overbed table.
Figure 1.1: Tribesigns Height Adjustable Overbed Table in a bedroom setting.
2. Safety Instructions
- Read all instructions carefully before assembly and use.
- Ensure all screws and fasteners are securely tightened before use. Periodically check for loose connections.
- Do not exceed the maximum weight capacity of the table.
- Keep children and pets away during assembly.
- Use the locking casters to secure the table in place when not moving it to prevent accidental movement.
- Do not place hot items directly on the table surface without protection.
- Ensure the power cord for the charging station is not pinched or damaged.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer service.
- Overbed Tabletop Sections (Main, Tiltable, Keyboard Tray)
- Left and Right Support Frames
- Adjustable Height Legs
- Lockable Casters (4x)
- Integrated Power Strip with AC Outlets and USB Ports
- Assembly Hardware (Screws, Bolts, Wrenches)
- Assembly Guide
Figure 3.1: Product dimensions and bed size compatibility (Twin to Queen).
4. Setup (Assembly)
Assembly typically requires two people. All necessary tools and detailed instructions are included in the package. Follow the step-by-step guide provided with your product for precise assembly.
- Unpack all components and lay them out on a clean, flat surface.
- Attach the adjustable height legs to the main support frames using the provided hardware.
- Secure the lockable casters to the bottom of the adjustable legs.
- Connect the tabletop sections (main, tiltable, keyboard tray) to the assembled frame. Ensure the tilt mechanism and keyboard tray slides are correctly oriented.
- Install the integrated power strip into its designated slot on the tabletop.
- Carefully tighten all screws and bolts. Do not overtighten.
- Once assembled, gently roll the table into position over your bed.
Figure 4.1: Overview of assembled table features.
5. Operating Instructions
5.1 Height Adjustment
The table's height can be adjusted from 35.4 inches to 43.3 inches to accommodate various bed heights and user preferences. To adjust, loosen the creative knobs on both sides of the table legs, raise or lower the tabletop to the desired height, and then securely tighten the knobs to lock it in place.
Figure 5.1: Height adjustment mechanism.
5.2 Adjustable Tilt Board
The integrated tilt board offers 5-level adjustable settings, from 0 to 45 degrees, ideal for reading, drawing, or using a laptop. Lift the board to engage the desired angle and ensure it is securely seated in the grooves.
Figure 5.2: Adjustable tilt board and other detailed features.
5.3 Charging Station
The table includes a convenient charging station with 2 AC outlets (120V/12A) and 2 USB ports (5V/2A). Plug the table's power cord into a wall outlet. You can then connect your devices directly to the integrated outlets and USB ports for charging.
Figure 5.3: Integrated charging station.
5.4 Mobility and Stability
The table is equipped with four lockable universal wheels. To move the table, unlock the casters. To secure the table in a stationary position, press down on the locking mechanism on each caster until it clicks into place.
6. Maintenance
To ensure the longevity and appearance of your Tribesigns Overbed Table, follow these simple maintenance guidelines:
- Cleaning: Wipe the table surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Inspections: Periodically check all screws and connections to ensure they remain tight. Retighten as necessary.
- Caster Care: Keep the casters free of debris to ensure smooth rolling.
7. Troubleshooting
If you encounter any issues with your overbed table, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly or unstable. | Loose assembly hardware. | Check and tighten all screws and bolts. Ensure the table is on a flat, even surface. |
| Height adjustment is difficult. | Knobs not fully loosened or mechanism is stiff. | Ensure both adjustment knobs are fully loosened. Apply a small amount of silicone lubricant to the sliding parts if necessary. |
| Charging ports are not working. | Table's power cord not plugged in or power strip issue. | Verify the table's power cord is securely plugged into a working wall outlet. Check if the wall outlet itself has power. |
| Casters do not roll smoothly or lock. | Debris in casters or locking mechanism issue. | Clean any hair or debris from the caster wheels. Ensure the locking lever is fully engaged or disengaged. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Tribesigns |
| Model Number | OBTNY114 |
| Product Dimensions (D x W x H) | 15.74"D x 70.87"W x 39.4"H |
| Height Adjustment Range | 35.4" to 43.3" |
| Working Surface Diagonal Length | 70.87 Inches |
| Color | Rustic Brown |
| Material | Engineered Wood (Top), Metal (Base) |
| Item Weight | 46.3 Pounds |
| Power Outlets | 2 AC Outlets (120V/12A) |
| USB Ports | 2 USB Ports (5V/2A) |
| Power Cord Length | 6.5-foot |
| Special Features | Ergonomic, Wheels, Adjustable Tilt Board, Keyboard Tray, Heightened Baffle |
| Compatible Bed Sizes | Twin to Queen (up to 70.86 inches length) |
9. Warranty and Support
9.1 Warranty Information
The Tribesigns Height Adjustable Overbed Table comes with a Lifetime Warranty. This warranty covers manufacturing defects and ensures the product's quality and durability under normal use. Please retain your proof of purchase for warranty claims.
9.2 Customer Support
For any questions, concerns, or assistance with assembly, operation, or troubleshooting, please do not hesitate to contact Tribesigns customer service. Our professional and friendly team is ready to provide support.
Contact information can typically be found on the Tribesigns official website or through your purchase platform.
