Introduction
Thank you for choosing the CHOEZON Floating Shelves. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new shelves. Please read these instructions thoroughly before assembly and retain them for future reference.
Safety Information
Important Safety Instructions:
- Ensure proper installation using all provided hardware.
- Do not exceed the maximum weight limit of 10 kg (22 pounds) per shelf. Overloading can cause damage or injury.
- Follow all installation instructions carefully to avoid potential hazards.
- Regularly check the shelves for stability and tighten any loose fasteners.
- Keep small children and pets away from the installation area during assembly.
Package Contents
Before beginning assembly, please verify that all parts listed below are present and undamaged.
- 2 x Wall Shelves (Engineered Wood)
- 2 x Metal Frames (Diamond Shape)
- 1 x Accessory Kit (includes screws, wall anchors, etc.)
- 1 x Instruction Manual (this document)
Figure 1: Product Dimensions and Weight Capacity. Each shelf measures approximately 38 cm (15 inches) in length and 14 cm (5.5 inches) in depth, with a total height of 38 cm (15 inches) when assembled. Each tier can support up to 22 lbs (10 kg).
Specifications
| Brand | CHOEZON |
| Model Number | TBJ01P2BB |
| Material | Engineered Wood, Metal |
| Mounting Type | Wall Mount |
| Dimensions (L x W x H) | 38 x 14 x 38 cm (15 x 5.5 x 15 inches) |
| Weight Capacity (per shelf) | 10 kg (22 lbs) |
| Number of Shelves | 2 (per unit) |
| Color | Black |
| Assembly Required | Yes |
Setup and Installation
Follow these steps to correctly install your CHOEZON Floating Shelves. It is recommended to have a second person assist with installation for safety and ease.
- Prepare the Wall: Choose a suitable location on a sturdy wall. Ensure there are no electrical wires or water pipes behind the drilling points. Use a stud finder if mounting into drywall to locate studs for maximum stability.
- Mark Drilling Points: Hold the shelf frame against the wall at the desired height and use a pencil to mark the positions of the gourd-shaped mounting holes. Ensure the marks are level.
- Drill Holes: Using an appropriate drill bit for your wall type (e.g., masonry bit for brick/concrete, wood bit for studs), drill holes at the marked positions. If drilling into drywall without a stud, insert the provided wall anchors.
- Attach the Frame: Align the shelf frame with the drilled holes. Insert the screws through the frame's mounting holes and into the wall anchors or studs. Tighten the screws securely until the frame is firmly attached to the wall. Do not overtighten.
- Place the Shelves: Carefully place the engineered wood shelf boards onto the metal frame. Ensure they are seated properly and are stable.
Figure 2: Easy Installation Steps. The image details the process of securing the shelf frame to the wall using the provided hardware.
Operating and Usage
Your CHOEZON Floating Shelves are designed for decorative and functional storage. To ensure longevity and safety:
- Distribute weight evenly across each shelf.
- Do not place items heavier than 10 kg (22 lbs) on a single shelf.
- Avoid placing fragile or top-heavy items where they could easily fall.
- These shelves are suitable for various rooms including living rooms, bedrooms, kitchens, offices, and bathrooms.
Figure 3: Shelf Load Capacity. The shelves are designed to hold up to 22 lbs (10 kg) per tier, suitable for books, small decor, and other household items.
Maintenance
To keep your CHOEZON Floating Shelves in optimal condition:
- Clean the shelves with a dry, soft cloth.
- Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish.
- Periodically check all mounting screws and connections to ensure they remain tight and secure.
- Wipe up any spills immediately to prevent water damage to the engineered wood.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shelves are wobbly or not secure. | Screws are loose or not properly installed; incorrect wall anchors used. | Ensure all screws are tightened. Verify that appropriate wall anchors were used for your wall type. Re-drill and use correct anchors if necessary. |
| Shelf appears uneven. | Mounting points were not level during installation. | Remove the shelf, re-mark the drilling points using a spirit level, and re-install. |
| Items slide off easily. | Shelf is not level; surface is too smooth. | Check if the shelf is level. Consider using non-slip mats or decorative bookends for items. |
Warranty and Support
CHOEZON products are manufactured with quality and durability in mind. For specific warranty details or technical support, please refer to the product packaging or contact CHOEZON customer service directly through the retailer where the product was purchased. Please have your model number (TBJ01P2BB) ready when contacting support.
You can visit the official CHOEZON store for more information: CHOEZON Store