Mulli Portable Blender User Manual

1. Introduction

Thank you for choosing the Mulli Portable Blender. This compact and powerful personal mixer is designed for convenient preparation of smoothies, shakes, baby food, and more, whether at home, the gym, or while traveling. Featuring a USB rechargeable battery and six durable stainless steel blades, it offers efficient blending with user-friendly operation and enhanced safety features.

Image: The Mulli Portable Blender, black base with a clear blending cup filled with mixed berries and ice, surrounded by fresh blueberries, raspberries, and blackberries.

2. Safety Instructions

Please read all safety instructions carefully before using the Mulli Portable Blender to ensure safe and optimal performance.

• Proper Assembly: Ensure the blending cup is securely screwed onto the base and the marker is in the correct position before operation. The blender features a linkage switch design that prevents operation if not properly assembled.
• Charging Port Protection: The USB charging port has silicone protection. Always ensure this cover is securely closed when not charging to prevent water ingress. Do not immerse the base in water.
• Overload Protection: The blender has a resistance sensing automatic stop design. If ingredients are too large or too much, the blender may stop automatically to prevent damage. Reduce the load or cut ingredients into smaller pieces.
• Blade Safety: The blades are sharp. Exercise extreme caution when handling the blade assembly and during cleaning. Keep fingers and utensils away from moving blades.
• Child Safety: Keep the blender out of reach of children. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless supervised.
• Liquid Requirements: Always add sufficient liquid to ingredients for proper blending and to prevent motor strain.
• Hot Liquids: Do not blend hot liquids as pressure buildup can cause the lid to eject and result in injury.

Image: A comparison showing the Mulli Portable Blender's security design. On the left, a green light blinks for normal startup, indicating correct assembly. On the right, a flashing green light indicates the blender will not start due to incorrect assembly or other safety reasons.

3. Product Components

The Mulli Portable Blender consists of the following main components:

• Blender Base: Contains the motor, battery, control button, and charging port. Features non-slip mats for stability.
• Blade Assembly: Integrated into the base, featuring six 304 stainless steel blades.
• Blending Cup: Made from food-grade ABS material, with a 14oz (400ml) capacity and measurement markings.
• Lid: Securely seals the blending cup.
• USB-C Charging Cable: For recharging the blender's internal battery.
• Cleaning Brush: Included for thorough cleaning of hard-to-reach areas.

Image: An exploded diagram of the Mulli Portable Blender, showing the lid, clear blending cup with measurement markings (up to 400ml/14oz), and the base with the six-blade assembly. Insets highlight the easy-clean, BPA-free material of the cup and the sharp serrated 304 stainless steel blades.

4. Setup and Charging

Before first use, ensure the blender is fully charged.

1. Initial Charge: Open the silicone cover on the base to reveal the USB-C charging port. Connect the provided USB-C cable to the blender and plug the other end into a power source such as a power bank, computer, or USB wall adapter.
2. Charging Indicator: The power button's indicator light will show charging status. A full charge typically takes about 3 hours.
3. Assembly: After charging, ensure the blending cup is clean and properly aligned with the base. Twist the cup clockwise until it is securely locked and the marker on the cup aligns with the marker on the base. This activates the safety linkage switch.

Image: The Mulli Portable Blender with an overlay illustrating multiple charging options: Power Bank, Laptop, USB port, and Car charger, all via a Type-C charging cable.

5. Operating Instructions

Follow these steps to operate your Mulli Portable Blender:

1. Prepare Ingredients: Cut fruits and vegetables into small pieces (approximately 1 inch or 2.5 cm) to ensure smooth blending and prevent blade obstruction.
2. Add Ingredients: Place ingredients into the blending cup. Always add liquid first, then soft ingredients, and finally harder ingredients or ice. Do not exceed the maximum fill line (400ml/14oz).
3. Secure Lid: Screw the lid onto the blending cup tightly.
4. Attach to Base: Invert the blending cup and securely screw it onto the blender base. Ensure the alignment markers on the cup and base are matched. The indicator light on the power button will show green when ready to operate.
5. Start Blending: Long press the power button for 2 seconds to start blending. The blender will run for approximately 30-40 seconds per cycle. For optimal results, gently shake the blender during operation to ensure all ingredients come into contact with the blades.
6. Stop Blending: The blender will automatically stop after a cycle. You can also short press the power button to stop it manually.
7. Enjoy: Unscrew the blending cup from the base, remove the lid, and pour your freshly blended drink.

Image: The Mulli Portable Blender demonstrating its linkage switch safety design. A finger is shown long-pressing the power button. Text indicates that the blender will only start when the marker on the cup is in the correct position, ensuring safe use.

Image: The Mulli Portable Blender surrounded by icons and examples of its various uses, including Fresh Juice, Vegetable Juice, Smoothies & Milk Shakes, Mask Mud, Soy Milk, Ice Cream, and Baby Food.

6. Maintenance and Cleaning

Proper cleaning ensures the longevity and hygiene of your blender.

1. Self-Cleaning Mode: For quick cleaning, add water and a drop of dish soap to the blending cup. Secure the lid and base, then long press the power button to activate the self-cleaning mode. Run for 30 seconds.
2. Manual Cleaning: For thorough cleaning, disassemble the blending cup from the base. Rinse the cup and lid under running water. Use the provided cleaning brush to clean around the blades carefully.
3. Base Cleaning: Wipe the blender base with a damp cloth. Do not immerse the base in water, as this can damage the electronic components and charging port. Ensure the silicone charging port cover is always closed during cleaning.
4. Drying: Allow all parts to air dry completely before reassembling or storing.

Image: A person cleaning the disassembled Mulli Portable Blender. The base with blades is being rinsed under a faucet, while the clear blending cup and lid are shown separately, emphasizing the easy disassembly for cleaning.

7. Troubleshooting

If you encounter issues with your Mulli Portable Blender, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

The Mulli Portable Blender comes with a 1 Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or failure to follow the instructions in this manual.

For warranty claims, technical support, or any questions regarding your Mulli Portable Blender, please contact Mulli customer service.

Mulli Customer Service:
Please refer to the contact information provided on the product packaging or the official Mulli website for the most up-to-date support channels.