1. Product Overview
The SIMSONN PRO X Ultra Sim Racing Pedals are designed for PC racing simulators, offering a realistic and immersive experience. These pedals feature pressure sensor load cells and hydraulic damping for precise control and feedback. They are compatible with various racing games and simulator setups.
Image 1: SIMSONN PRO X Ultra Sim Racing Pedals, showcasing the three-pedal setup with RGB lighting.
Product Demonstration Video
Video 1: A demonstration of the SIMSONN PRO X PC Racing Simulator Pedals in use, highlighting their responsiveness and RGB lighting.
2. Key Features
- Durable High-Strength Steel Construction: Crafted from 3MM thick CNC precision laser cut high-strength steel, with the brake load-bearing part thickened to 6mm and pedal panels to 4mm. Processes include laser cutting, polishing, brushing, and electrophoresis.
- High-Precision Sensor Technology: Equipped with advanced load cell components for true linear input measurement of throttle, clutch, and braking force, ensuring precise responses.
- Powerful Processing Unit: Integrates 6 chips, including two independent 32-bit processors and a dedicated 16-bit high-resolution ADC for synchronous signal acquisition. Three fully differential signal amplification chips provide noise immunity, ensuring stable, low-latency, and high-precision signal processing.
- Multi-Dimensional Adjustability: Pedals can be adjusted up, down, left, and right on the base plate. Throttle, brake, and clutch can be independently adjusted for pedal panel height, pedal angle, travel distance, and force curve.
- Dual Bearing Design: Utilizes flange bearings and plane bearings for precise and smooth pedal movement, enhancing realistic feel and feedback.
- Adjustable Resistance Hydraulic Rod: The brake pedal includes an adjustable hydraulic resistance rod with 1-8 levels of adjustment. Hydraulic rods for other pedals are optional.
- Stronger Damping: Brake damping uses 60HA red rubber damping, with extra 80HA and 90HA options for replacement.
- RGB Light Effects: Supports dynamic display of pedal pressure. LED lighting effects are customizable via SIMSONN Manager software, with synchronization across SIMSONN devices.
- SIMSONN Manager Software Support: Allows configuration of non-linear pedal output curves, dead zones, and brake curves. Settings can be saved as profiles for various simulator software.
Image 2: Close-up view of the SIMSONN PRO X Ultra Pedals highlighting the precision load cell technology for accurate input measurement.
Image 3: Illustration of the dual-core processor within the SIMSONN PRO X Ultra Pedals, emphasizing its advanced signal processing capabilities.
Haptic Feedback Demonstration
Video 2: A video demonstrating the haptic reactor feature of the SIMSONN pedals, providing tactile feedback.
Video 3: This video illustrates how the SIMSONN PRO X Ultra Pedals support the haptic reactor, enhancing the immersive racing experience.
3. Setup Guide
3.1. Compatibility
The SIMSONN PRO X Ultra Pedals are compatible with all Steam ESR (Extreme Sim Racing) wheel stands and cockpits. They are designed for PC use only and do not work on PS4/5, XBOX, or MAC systems. For PC, simply plug directly into a USB port; no driver installation is required. Compatible with Windows 11 and earlier versions.
3.2. Mechanical Adjustments
The pedals offer extensive mechanical adjustments to suit individual preferences. These include:
- Pedal Angle Adjustment: Adjust the angle of each pedal for optimal comfort and control.
- Pedal Height Adjustment: Modify the height of the pedal surface to match your foot position.
- Pedal Stroke Adjustment: Customize the travel distance of each pedal.
- Pedal Preload Adjustment: Fine-tune the initial resistance of the pedals.
- Brake Pedal Resistance Adjustment: The brake pedal features an adjustable hydraulic rod with 1-8 levels of resistance.
Image 4: A detailed view of the SIMSONN PRO X Ultra Pedals showing the 60HA damping and the adjustable hydraulic rod for personalized resistance.
Mechanical Adjustment Video Guide
Video 4: A comprehensive guide demonstrating the mechanical adjustments available on the SIMSONN PRO X Pedals, including pedal angle, height, stroke, and preload.
3.3. Software Calibration
After physical setup, calibrate your pedals using the SIMSONN Manager software for optimal performance. This ensures accurate input registration and allows for custom curve and dead zone settings.
Calibration Steps:
- Connect the pedals to your PC via USB.
- Launch the SIMSONN Manager software.
- Navigate to the "Device" section and select "Pedal".
- Click the "Calibrate" button.
- Follow the on-screen instructions to depress each pedal fully and release.
- Save your calibration settings.
Software Calibration Video Guide
Video 5: A step-by-step video tutorial on how to calibrate the SIMSONN PRO X Pedals using the SIMSONN Manager software.
4. Operating Instructions
4.1. Customizing Pedal Curves and Dead Zones
The SIMSONN Manager software allows for advanced customization of pedal behavior:
- Non-Linear Pedal Output Curves: Adjust the responsiveness of each pedal to your preference, from linear to progressive or aggressive curves.
- Dead Zones: Set minimum and maximum dead zones to eliminate unintended inputs or to fine-tune the pedal's active range.
- Brake Curves: Specifically adjust the brake pedal's response curve for precise braking control.
These settings can be saved as profiles within the software, allowing you to switch between different configurations for various games or driving styles without re-adjusting in-game settings.
4.2. RGB Lighting Control
The integrated RGB lighting provides visual feedback and can be customized through the SIMSONN Manager software. Available lighting modes include:
- Static Color: Choose a single color for constant illumination.
- Breathing: Lights fade in and out.
- Rainbow: Cycles through a spectrum of colors.
- Flowing: Colors flow across the light bar.
- Follow: Lighting dynamically responds to pedal pressure.
Image 5: The SIMSONN PRO X Ultra Pedals showcasing their smart RGB lighting, which can be customized for various effects.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your SIMSONN PRO X Ultra Pedals.
5.1. Cleaning
- Wipe down the pedal surfaces and frame with a soft, dry cloth.
- Avoid using abrasive cleaners or solvents, as these can damage the finish or internal components.
- Ensure no liquids enter the electronic components or USB connections.
5.2. Component Inspection
- Periodically check all bolts and nuts for tightness. Re-tighten if necessary.
- Inspect the hydraulic rod and springs for any signs of wear or damage.
- Check the rubber damping elastomers for cracks or degradation. Replacement elastomers (60HA, 80HA, 90HA) are provided for customization and wear.
Image 6: Various elastomer materials (red 60HA, yellow 70HA, blue 80HA) and spacers for customizing pedal feel and replacing worn components.
5.3. Software Updates
Regularly check the SIMSONN website or SIMSONN Manager software for firmware and software updates to ensure optimal performance and access to new features.
6. Troubleshooting
If you encounter issues with your SIMSONN PRO X Ultra Pedals, refer to the following common solutions:
- Pedals Not Responding:
- Ensure the USB cable is securely connected to both the pedals and your PC.
- Verify that the pedals are recognized in the SIMSONN Manager software (check "Connected (USB)" status).
- Restart your PC and the SIMSONN Manager software.
- Try a different USB port or cable.
- Inconsistent Pedal Input:
- Perform a software calibration using the SIMSONN Manager.
- Check for any physical obstructions preventing full pedal travel.
- Adjust dead zones in the SIMSONN Manager to prevent ghost inputs.
- Lighting Issues:
- Ensure the "Lights Switch" is enabled in the SIMSONN Manager's "Light" section.
- Check individual pedal lighting settings and brightness levels.
- If using "Sync" mode, ensure the selected pedal's lighting mode is active.
- Software Not Launching/Recognizing Pedals:
- Ensure your operating system is Windows 11 or below.
- Reinstall the SIMSONN Manager software.
- Temporarily disable any antivirus or firewall software that might be blocking the application.
For further assistance, please contact SIMSONN customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | SIMSONN PRO X Ultra Sim Racing Pedals |
| Model Number | PRO-P3-H1 |
| Compatibility | PC (Windows 11 and below), Steam ESR wheel stands/cockpits. Not compatible with PS4/5, XBOX, MAC. |
| Construction Material | 3MM CNC precision laser cut high-strength steel (6mm for brake load-bearing, 4mm for pedal panels) |
| Sensor Technology | Load Cell (throttle, clutch, brake) |
| Processor | 2x 32-bit processors, 1x 16-bit high-resolution ADC, 3x differential signal amplification chips |
| Input Resolution | 16-bit HID game controller axes (0 to 65,535 or -32,768 to 32,767) |
| Adjustments | Pedal angle, height, travel distance, force curve, brake resistance (1-8 levels hydraulic rod) |
| Damping | 60HA red rubber damping (80HA, 90HA included for replacement) |
| Lighting | RGB light effects, customizable via SIMSONN Manager software |
| Software | SIMSONN Manager (for calibration, curve/dead zone adjustment, lighting control) |
| Product Dimensions | 24.41 x 17.72 x 5.91 inches |
| Item Weight | 14.96 pounds |
8. Warranty & Support
8.1. Warranty Information
SIMSONN provides a 12-month warranty for defective products. This warranty does not cover any damage or misuse caused by the buyer. Accessories are covered by a 3-month warranty.
Please retain your proof of purchase for warranty claims.
8.2. Customer Support
For any questions, technical assistance, or calibration support after receiving your product, please contact SIMSONN customer service. Our dedicated team of engineers and designers are committed to providing cutting-edge solutions and comprehensive support.
We offer remote support to assist our customers with any issues they may encounter.
Contact information can typically be found on the SIMSONN official website or within the SIMSONN Manager software.
