Introduction
Thank you for choosing Minetom Battery Operated Rope String Lights. This manual provides essential information for the safe and efficient use of your new lighting product. Please read these instructions carefully before installation and operation, and retain them for future reference.
Safety Information
- Battery Safety: Use only the specified battery type (e.g., AA batteries, not included). Do not mix old and new batteries, or different types of batteries. Ensure correct polarity (+/-) when inserting batteries. Remove batteries if the product is not used for an extended period to prevent leakage.
- Water Resistance: This product is rated IP44 waterproof, meaning it is protected against solid objects over 1mm and against splashing water from any direction. It is suitable for outdoor use but should not be submerged in water. Protect the battery box from heavy rain or prolonged exposure to moisture.
- Installation: Do not hang the lights in a way that could damage the wire or LED bulbs. Avoid placing the lights near heat sources or in direct sunlight for prolonged periods, as this may affect battery life and product longevity.
- Children and Pets: Keep the product and batteries out of reach of children and pets. Small parts could be a choking hazard.
- Disposal: Dispose of batteries and the product according to local regulations. Do not dispose of batteries in fire.

Image: Minetom Rope Lights installed on a house exterior, demonstrating their IP44 waterproof design suitable for outdoor use.
Package Contents
Verify that all components are present in the package:
- 1 x 40FT 100 LED Rope Lights (Green) with Battery Box
Specifications
| Feature | Detail |
|---|---|
| Light Color | Green |
| Length | 40 FT (33 FT lighting length + 7 FT lead cable) |
| Number of LEDs | 100 |
| Power Source | Battery Powered (Batteries not included) |
| Special Feature | Timer Function, 8 Lighting Modes |
| Water Resistance | IP44 Waterproof |
| Material | Copper wire with PVC rope casing |
| Wattage | 4.5 watts |

Image: A diagram illustrating the total length of the rope lights, including the lead cable and the illuminated section.
Setup
- Unpack: Carefully remove the rope lights from the packaging. Uncoil the lights gently to avoid tangling or damaging the wire.
- Install Batteries: Open the battery compartment on the battery box. Insert 3 AA batteries (not included), ensuring correct polarity (+ and -). Close the battery compartment securely.
- Placement: Position the rope lights in your desired location. The flexible rope design allows for various decorative arrangements. Ensure the battery box is placed in a location where it is protected from direct heavy rain or prolonged moisture exposure, even though the lights themselves are IP44 rated.

Image: The Minetom Green Rope Lights in a coiled state, with a clear view of the battery box and its control buttons.
Operating Instructions
The battery box features an ON/OFF switch and a "MODE" button to control the lighting effects and timer function.
- Power On/Off: Slide the switch on the battery box to "ON" to power on the lights. Slide to "OFF" to power off.
- Changing Lighting Modes: Press the "MODE" button repeatedly to cycle through the 8 available lighting modes:
- Combination
- In Wave
- Sequential
- Slo-glo
- Chasing/Flash
- Slow Fade
- Twinkle/Flash
- Steady On
- Timer Function: When the lights are turned ON, the timer function is automatically activated. The lights will stay ON for 6 hours and then turn OFF for 18 hours, repeating this cycle daily. To reset the timer, turn the lights OFF and then ON again.

Image: An indoor setting illuminated by Minetom Rope Lights, demonstrating the variety of 8 lighting modes and the battery box with its control buttons.

Image: Minetom Rope Lights used as decorative lighting in a living room, illustrating the automatic 6-hour ON and 18-hour OFF timer function.
Maintenance
- Battery Replacement: When the lights dim or stop working, it's time to replace the batteries. Open the battery compartment, remove the old batteries, and insert new AA batteries, observing polarity.
- Cleaning: Gently wipe the rope lights with a soft, damp cloth if they become dirty. Do not use harsh chemicals or abrasive cleaners. Ensure the battery box remains dry during cleaning.
- Storage: If storing the lights for an extended period, remove the batteries from the battery box. Coil the lights neatly and store them in a cool, dry place away from direct sunlight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. |
|
|
| Lights are dim or flicker. |
|
|
| Lights stop working after rain. |
|
|
| Timer function is not working as expected. |
|
|
Warranty and Support
Minetom products are designed for quality and reliability. If you encounter any issues or have questions regarding your Minetom Rope String Lights, please refer to the retailer's return policy or contact Minetom customer support for assistance. Please have your purchase details ready when contacting support.
For more information, visit the official Minetom Store: Minetom Store on Amazon

