House of Marley Jammin' Portable Bluetooth Speaker

1. Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your House of Marley Jammin' Portable Bluetooth Speaker. Please read this guide thoroughly before using your device to ensure optimal performance and longevity. The Jammin' speaker is designed for portability and features IPX5 splashproof protection, True Wireless Stereo (TWS) pairing, and an eco-friendly design utilizing recycled materials.

2. Safety Information

• Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping or subjecting the speaker to strong impacts.
• Do not attempt to disassemble or modify the speaker. This will void the warranty.
• Keep the speaker away from water sources beyond its IPX5 splashproof rating. Do not submerge the device.
• Use only the provided USB-C charging cable or a certified equivalent.

3. Package Contents

Verify that all items are present in your package:

• House of Marley Jammin’ Bluetooth Speaker
• USB to USB-C charging cable
• Lanyard
• Quick start guide

4. Product Overview

Familiarize yourself with the components of your Jammin' speaker:

Image 1: Front view of the House of Marley Jammin' Portable Bluetooth Speaker. The speaker features a mesh grille, a central Marley logo, and control buttons on the top panel.

Controls and Indicators:

• Power Button: Press and hold to turn the speaker on or off.
• Bluetooth Pairing Button: Initiates Bluetooth pairing mode.
• Volume Up (+): Increases volume. Press and hold to skip to the next track.
• Volume Down (-): Decreases volume. Press and hold to skip to the previous track.
• Play/Pause Button: Plays or pauses audio. Answers or ends phone calls.
• LED Indicator: Shows power status, charging status, and Bluetooth connection status.
• USB-C Charging Port: For charging the speaker.
• 3.5mm AUX Input: For wired audio connection (cable not included).
• Lanyard Attachment Point: For securing the included lanyard.

5. Setup

5.1. Charging the Speaker

1. Locate the USB-C charging port on the speaker, usually protected by a rubber flap.
2. Connect the small end of the provided USB-C cable to the speaker's charging port.
3. Connect the larger USB-A end of the cable to a USB power adapter (not included) or a computer's USB port.
4. The LED indicator will show charging status (e.g., solid red while charging, off when fully charged).
5. Allow approximately 2-3 hours for a full charge. A full charge provides up to 6 hours of playtime.

5.2. Bluetooth Pairing

1. Ensure the speaker is charged.
2. Press and hold the Power button to turn on the speaker. The LED indicator will flash, indicating it's in pairing mode.
3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
4. Select "Jammin" from the list of available devices.
5. Once connected, the LED indicator will turn solid, and you will hear an audible confirmation.
6. The speaker will automatically attempt to reconnect to the last paired device when powered on.

6. Operating the Speaker

6.1. Basic Audio Playback

• Play/Pause: Press the Play/Pause button once.
• Volume Up: Press the '+' button.
• Volume Down: Press the '-' button.
• Next Track: Press and hold the '+' button.
• Previous Track: Press and hold the '-' button.

6.2. Call Handling (Built-in Microphone)

Image 2: The Jammin' speaker highlighting its True Wireless Pair Mode and Built-in Microphone capabilities.

• Answer/End Call: Press the Play/Pause button once.
• Reject Call: Press and hold the Play/Pause button.

6.3. True Wireless Stereo (TWS) Pairing

To achieve a more immersive stereo sound experience, you can pair two Jammin' speakers together:

1. Ensure both Jammin' speakers are powered on and not connected to any other Bluetooth device.
2. On one speaker (this will be your primary speaker), press and hold the Bluetooth pairing button until you hear a prompt or see a specific LED pattern indicating TWS pairing mode.
3. The primary speaker will automatically search for the second speaker.
4. Once connected, you will hear an audible confirmation, and the LED indicators on both speakers will change to reflect the TWS connection.
5. Now, connect your device to the primary speaker via Bluetooth as described in section 5.2. Audio will play in stereo across both speakers.

7. Care and Maintenance

Image 3: The Jammin' speaker in an outdoor setting, demonstrating its IPX5 splash resistance.

• Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners, alcohol, or solvents.
• IPX5 Rating: The speaker is IPX5 splashproof, meaning it can resist low-pressure water jets from any direction. It is suitable for use in light rain or near a pool, but it is not designed to be submerged in water. Ensure the charging port flap is securely closed when exposed to moisture.
• Storage: Store the speaker in a cool, dry place when not in use. Avoid prolonged exposure to extreme temperatures.
• Battery Care: To preserve battery life, fully charge the speaker before long periods of storage and recharge it every few months.

8. Troubleshooting

9. Specifications

Image 4: Top-down view of the Jammin' speaker with its approximate dimensions: 3.4 inches (8.5 cm) width and 2.5 inches (6.5 cm) height.

10. Warranty Information

The House of Marley Jammin' Portable Bluetooth Speaker comes with a limited warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official House of Marley website or the warranty card included with your product. Keep your proof of purchase for warranty claims.

11. Customer Support

For further assistance, technical support, or frequently asked questions, please visit the official House of Marley website:

www.thehouseofmarley.com

You may also find additional resources and contact information on their support pages.