Wiwreenm 200W LED Moving Head Stage Light Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your Wiwreenm 200W LED Moving Head Stage Light. Please read this manual thoroughly before installation, operation, or maintenance. Keep this manual for future reference.

2. Safety Instructions

• Always connect the unit to a grounded circuit to avoid the risk of electrocution.
• Ensure the power voltage matches the voltage specified on the unit.
• Do not operate the unit if the power cord is damaged.
• Avoid direct eye exposure to the light source.
• Ensure adequate ventilation around the unit to prevent overheating. Maintain a minimum distance of 0.5 meters from flammable materials.
• Do not open the unit casing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
• This product is designed for indoor use only. Do not expose to rain or moisture.
• Mount the unit securely using appropriate clamps and safety cables.

3. Package Contents

Upon opening the package, verify that all items listed below are present and undamaged:

• 1 x Wiwreenm 200W LED Moving Head Stage Light
• 1 x Power Cable
• 1 x 3-Pin Signal Cable (DMX Cable)
• 1 x Mounting Bracket
• 2 x Bracket Screws
• 1 x User Manual

4. Setup

4.1 Mounting

The unit can be mounted in various positions (e.g., ceiling, truss) using the provided mounting bracket. Ensure the mounting surface or structure can safely support the weight of the fixture.

4.2 Power Connection

Connect the power cable to the POWER input on the rear of the unit. Rotate the connector to lock it securely. Then, turn on the main power switch.

4.3 DMX Connection

For DMX control, connect a 3-pin DMX cable from your DMX controller to the DMX IN port of the first fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on.

Image: Detailed view of the control panel, showing DMX IN/OUT, power input, and display.

5. Operating Modes

The Wiwreenm 200W LED Moving Head Stage Light offers multiple control modes, selectable via the LCD display and control buttons on the base.

5.1 Control Panel Navigation

Use the MENU, UP, DOWN, and ENTER buttons to navigate through the settings on the 1.9-inch LCD display.

5.2 Auto Mode

In Auto Mode, the fixture runs through pre-programmed light sequences automatically. Select 'Auto' from the RunMode menu.

5.3 Sound-Activated Mode

The Sound-Activated Mode allows the light to react to ambient sound. Select 'Sound' from the RunMode menu. The sound sensitivity can be adjusted.

5.4 Master-Slave Mode

Connect multiple fixtures via DMX cables. Set one fixture as the 'Master' (e.g., in Auto or Sound mode) and the others as 'Slave' to synchronize their operation.

5.5 DMX Mode

For advanced control, connect the fixture to a DMX512 controller. Select 'DMX' from the RunMode menu and set the DMX address and channel mode (14 channels available). This allows for precise control over all light functions.

6. Product Features and Effects

6.1 High Brightness LED Beam

The fixture utilizes a 200W RGBW LED module with a 4° light angle and 8000K color temperature, ensuring high brightness and a long service life of over 50,000 hours. Electronic focusing provides clear patterns and spots from 3 to 10 meters.

Image: Illustration of the 4-degree beam effect and electronic focus capabilities.

6.2 Pan and Tilt Movement

The moving head offers a Pan range of 540° and a Tilt range of 200°. It features XY-axis intelligent reset for comprehensive scanning without dead angles.

Image: Visual representation of the Pan (540°) and Tilt (200°) movement ranges.

6.3 Color Wheel

The color wheel features 9 colors plus open white, allowing for flow, half-color, and rotation in two directions.

Image: Demonstration of the various colors available from the light's color wheel.

6.4 Gobo Wheels

Equipped with 13+1 gobo wheels, providing various patterns with flow, shaking, and rotation in two directions.

Image: Examples of the 14 gobo patterns, including shake and zoom effects.

6.5 Prism Effects

The light features an 18-facet prism that can be rotated 360°, creating dynamic multi-beam effects. Additional fogging colorful effects are also available.

Image: Visuals of the 18-facet prism gobos and their rotational effects.

6.6 Strobe and Dimming

The unit supports a strobe effect from 1-20Hz and 0-100% linear dimming for precise control over light intensity.

7. Maintenance

7.1 Cleaning

Regular cleaning of the lens and casing is recommended to maintain optimal light output and performance. Use a soft, lint-free cloth and a mild cleaning solution. Do not use abrasive cleaners.

7.2 Storage

When not in use, store the fixture in a dry, dust-free environment. If storing for extended periods, consider using the original packaging for protection.

8. Troubleshooting

8.1 No Power

• Check if the power cable is securely connected to both the fixture and the power outlet.
• Ensure the power switch on the unit is in the 'ON' position.
• Verify the power outlet is functional.
• Check the fuse on the unit. Replace if blown (ensure correct fuse type).

8.2 No Light Output

• Confirm the unit is receiving power.
• Check the selected operating mode. In DMX mode, ensure the DMX signal is present and the address is correctly set.
• Verify dimmer settings are not at 0%.

8.3 Erratic Movement or Function

• In DMX mode, check DMX cable connections and ensure there is no interference.
• Ensure the DMX address and channel mode are correctly configured.
• If in Master-Slave mode, confirm the master unit is functioning correctly and slave units are properly linked.

For any persistent issues or complex malfunctions, please contact customer support.

9. Specifications

10. Warranty and Support

For any malfunctions, operational questions, or warranty inquiries regarding your Wiwreenm 200W LED Moving Head Stage Light, please contact our technical support team promptly. We are committed to providing accurate solutions and professional assistance as soon as possible.

You may reach a YUER Technician via WhatsApp at: +86 158 6912 6689.