1. Introduction
Thank you for purchasing the Keazile 18.5" Dimmable Modern Walnut Wood Table Lamp. This manual provides detailed instructions for safe operation, assembly, maintenance, and troubleshooting to ensure optimal performance and longevity of your product. Please read this manual thoroughly before use and retain it for future reference.
2. Important Safety Instructions
- Read all instructions carefully before assembly and use.
- Do not connect electricity until the lamp is fully assembled.
- Use only the specified bulb type and wattage (E26, Max 60W Incandescent, Max 13W LED).
- Ensure the power cord is not pinched or damaged during assembly or placement.
- This lamp is designed for indoor use only. Do not expose to water or high humidity.
- Always unplug the lamp from the power outlet before cleaning or replacing the bulb.
- Keep away from flammable materials.
- If any part is damaged or missing, do not attempt to use the lamp. Contact customer support.
3. Package Contents
Please check the package contents to ensure all parts are present and undamaged:
- Lamp Body with E26 Socket and Rotary Switch
- Walnut Wood Base
- Green Velvet Lampshade (unassembled)
- Lampshade Frame (top and bottom rings)
- Socket Ring
Note: Bulb is NOT included.
4. Setup and Assembly
Follow these steps to assemble your Keazile Table Lamp:
- Assemble the Lampshade:
Unroll the green velvet lampshade material. Attach the top and bottom metal rings to the lampshade material, ensuring they click into place and the Velcro seams are securely fastened. This forms the cylindrical lampshade.
Image: Lampshade assembly steps.
- Attach Lamp Body to Base:
Carefully screw the lamp body (the wooden column with the bulb socket) into the walnut wood base until it is secure. Ensure the cord exits through the designated groove in the base.
Image: Lamp components including the base and body.
- Install the Lampshade:
Unscrew the socket ring from the lamp holder. Place the assembled lampshade onto the lamp holder, ensuring the top ring rests on the holder. Screw the socket ring back onto the lamp holder to secure the lampshade in place.
- Install the Bulb:
Screw an E26 base bulb (not included) into the lamp socket. We recommend using dimmable LED bulbs (Max 13W) or incandescent bulbs (Max 60W). Using a non-dimmable bulb may cause flickering or instability.
Image: Assembled lamp with dimensions and bulb type recommendation.
Image: Recommended E26 bulb types.
- Plug In:
Plug the power cord into a standard 110V-120V AC 60Hz wall outlet.
Assembly Video Guide:
Video: Detailed assembly instructions for the Keazile Walnut Wood Table Lamp.
5. Operating Instructions
The Keazile Table Lamp features a convenient rotary switch for easy operation.
- Turning On/Off:
Locate the rotary switch on the power cord. Rotate the switch clockwise to turn the lamp ON. Rotate it counter-clockwise to turn the lamp OFF.
Image: Lamp in OFF and ON states.
- Adjusting Brightness (Dimmable Bulbs Only):
If you are using a dimmable E26 bulb, the rotary switch allows for stepless brightness control. Rotate the switch clockwise to increase brightness and counter-clockwise to decrease brightness. Adjust to your desired illumination level.
Image: Stepless brightness control demonstration.
Operation Video Guide:
Video: Demonstrating the lamp's operation and light output.
6. Maintenance
- Cleaning: Always unplug the lamp before cleaning. Use a soft, dry cloth to wipe the lamp base and shade. Do not use abrasive cleaners or solvents, as they may damage the finish or fabric.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it. Unscrew the old bulb and screw in a new E26 base bulb of the correct wattage (Max 60W Incandescent, Max 13W LED).
- Cord Care: Regularly inspect the power cord for any signs of damage. If the cord is damaged, discontinue use and contact customer support.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Light flickers or buzzes. |
|
|
| Lampshade is unstable. |
|
|
8. Product Specifications
| Feature | Detail |
|---|---|
| Model Number | KZ-TL-007 |
| Product Dimensions | 11.8"D x 11.8"W x 18.5"H |
| Item Weight | 2.09 Pounds |
| Material Type | Velvet, Walnut Wood |
| Shade Material | Velvet |
| Shade Color | Green |
| Base Material | Walnut Wood |
| Bulb Base | E26 |
| Light Source Type | Dimmable Incandescent, Dimmable LED |
| Max Wattage | 60W (Incandescent), 13W (LED) |
| Voltage | 120 Volts |
| Switch Type | Rotary |
| Power Source | Corded Electric |
| Indoor/Outdoor Usage | Indoor |
| Certifications | UL Listed |
9. Warranty and Customer Support
Your Keazile Table Lamp is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact Keazile customer service. Please have your model number (KZ-TL-007) and proof of purchase ready.
Keazile is committed to creating stylish, functional home solutions and ensuring customer satisfaction.
- Online Support: Visit the Keazile Store on Amazon for more information and contact options.
- Email Support: Email assistance support is typically available within 24 hours.
- Replacements: Free replacements are offered for qualifying issues.
