1. Introduction
The ATOMSTACK S20 Pro is a high-performance laser engraving and cutting machine designed for precision and versatility. Featuring a 20W optical power laser, it offers robust capabilities for various materials. This manual provides essential information for the safe and effective operation, setup, and maintenance of your ATOMSTACK S20 Pro.
Figure 1: ATOMSTACK S20 Pro Laser Engraving Machine overview.
2. Safety Information
WARNING: Laser radiation can cause eye damage and skin burns. Always follow safety precautions.
- Always wear the provided laser safety goggles when the machine is operating.
- Ensure the work area is well-ventilated to dissipate fumes and smoke generated during engraving or cutting.
- Never leave the machine unattended during operation.
- Keep flammable materials away from the laser's path and work area.
- Keep children and pets away from the machine during operation.
- Familiarize yourself with the location and function of the emergency stop button.
- Do not attempt to engrave or cut unknown materials, as some may produce toxic fumes or catch fire.
3. Package Contents
Verify that all components are present in the package before assembly. If any parts are missing or damaged, contact customer support.
Figure 2: Included components of the ATOMSTACK S20 Pro.
- ATOMSTACK S20 Pro Laser Engraving Machine Frame (pre-assembled sections)
- 20W Laser Module
- F30 Pro Air Assist Pump
- Control Terminal
- Power Adapter and Cable
- USB Cable
- Laser Safety Goggles
- USB Drive / SD Card
- Assembly Tools and Fasteners
- Test Material Samples (e.g., wood pieces)
- User Manual (this document)
4. Setup
4.1. Assembly
Follow the detailed assembly instructions provided in the separate assembly guide. Ensure all frame components are securely fastened and the laser module is correctly mounted.
4.2. Connecting Components
- Connect the laser module cable to the designated port on the machine.
- Attach the F30 Pro Air Assist pump to the laser module and connect its power.
- Connect the control terminal to the machine.
4.3. Power Connection
Connect the power adapter to the machine and then plug it into a suitable AC power outlet.
4.4. Software Installation
The ATOMSTACK S20 Pro is compatible with popular laser control software such as LaserGRBL and LightBurn. Install your preferred software on your computer. Drivers may be required for USB connection.
Figure 3: The S20 Pro supports multiple operating systems and file formats.
4.5. Focus Adjustment
The ATOMSTACK S20 Pro features a fixed-focus laser module, which eliminates the need for manual focus adjustment. This design ensures consistent precision and simplifies operation.
5. Operating Instructions
5.1. Powering On and Off
Press the On/Off button on the control panel to power on the machine. To power off, press the button again.
Figure 4: Emergency button, On/Off switch, and Reset button on the control panel.
5.2. Emergency Stop
In case of an emergency, press the large red Emergency button to immediately stop all machine operations and cut power. To resume operation, turn the emergency button clockwise to release it, then press the Reset button.
5.3. Offline Engraving
The S20 Pro supports offline engraving via its control terminal. Transfer your engraving files (e.g., NC, BMP, JPG, PNG, DXF) to an SD card, insert it into the control terminal, and operate the machine without a computer connection.
Figure 5: Operating the S20 Pro using the control terminal for offline engraving.
5.4. Mobile App Control
Download the official ATOMSTACK mobile application from your device's app store. The app allows for wireless control and management of engraving tasks, providing a convenient user experience.
5.5. Computer Control
Connect the machine to your computer via the provided USB cable. Use LaserGRBL or LightBurn software to load your designs, set engraving/cutting parameters (power, speed, passes), and initiate the job.
5.6. Material Preparation and Placement
Place your material flat on the working surface. Ensure it is securely positioned to prevent movement during operation. The S20 Pro can engrave and cut over 40 different materials, including wood, acrylic, and stainless steel.
Figure 6: Examples of materials that can be engraved and cut by the S20 Pro.
5.7. Air Assist Operation
The F30 Pro Air Assist system significantly improves cutting performance by blowing away debris and reducing charring. Ensure the air pump is connected and functioning for optimal cutting results.
Figure 7: Comparison of air flow with the upgraded twin-cylinder compression air assist.
5.8. Grayscale Engraving
The S20 Pro's 256-bit grayscale mapping allows for detailed and nuanced engravings, producing richer contrasts and multi-color effects on materials like mirror stainless steel.
Figure 8: Example of detailed grayscale engraving capability.
6. Maintenance
6.1. Cleaning the Laser Lens
Regularly inspect and clean the laser lens using a soft, lint-free cloth and a specialized lens cleaning solution. A dirty lens can reduce laser power and engraving quality.
6.2. Cleaning the Machine
Keep the machine's frame, rails, and moving parts free from dust, debris, and material residue. Use a soft brush or compressed air. Ensure the machine is powered off and unplugged before cleaning.
6.3. Air Assist System Maintenance
Periodically check the air assist pump and tubing for blockages or wear. Ensure a consistent airflow to maintain optimal cutting performance and prevent material yellowing.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on | Power cable disconnected, faulty adapter, emergency stop engaged. | Check all power connections. Ensure the power adapter is functional. Release the emergency stop button if pressed. |
| Laser not firing | Laser module cable loose, incorrect software settings (power too low), laser module fault. | Verify laser module connection. Check software settings for laser power. Contact support if the module is suspected to be faulty. |
| Poor engraving/cutting quality | Dirty laser lens, incorrect power/speed settings, material not flat, air assist not active. | Clean the laser lens. Adjust power and speed settings in software. Ensure material is flat and secure. Activate air assist for cutting. |
| Machine stops unexpectedly | Emergency stop activated, software error, overheating, cable disconnection. | Check if the emergency stop button is pressed. Restart software and machine. Ensure proper ventilation. Check all cable connections. |
| No power supply included (as per some user feedback) | Packaging error or regional variation. | Verify package contents against the list. If missing, contact ATOMSTACK customer support immediately for a replacement or guidance. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | ATOMSTACK |
| Model | S20 Pro |
| Optical Laser Power | 20W |
| Machine Power (Effect) | 130W (equivalent to 300W CO2 effect) |
| Engraving Area | 400 x 410 mm |
| Laser Spot Size | 0.08 x 0.1 mm |
| Cutting Capability (Single Pass) | 10mm Paulownia wood, 8mm black acrylic |
| Cutting Capability (Max) | 20mm black acrylic, 0.05mm stainless steel |
| Motherboard | 32-bit with 256-bit grayscale support |
| Connectivity | USB, Offline (SD card), WiFi (Mobile App) |
| Software Compatibility | LaserGRBL, LightBurn |
| Operating System Compatibility | Windows XP/7/8/10, macOS (LightBurn) |
| Supported File Formats | NC, BMP, JPG, PNG, DXF |
| Package Dimensions | 56.6 x 52.4 x 19.1 cm |
| Package Weight | 10.17 kg |
| Power Source | AC |
9. Warranty and Support
9.1. Warranty Information
Please refer to the warranty card included with your product for specific warranty terms and conditions. Generally, ATOMSTACK products come with a limited warranty covering manufacturing defects.
9.2. Customer Support
For technical assistance, troubleshooting, or warranty claims, please contact ATOMSTACK customer service. Contact details can typically be found on the official ATOMSTACK website or on the product packaging.
