1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Antec C8 Curve Wood Full-View PC Case. The C8 Curve Wood combines cutting-edge design with exceptional quality, featuring a single 4mm curved steel-tempered glass panel for an unobstructed view of your hardware and a real wood panel on the front right side. Crafted from 0.8+1.0mm high-strength steel, it ensures structural integrity. Please read this manual thoroughly before beginning your PC build.
2. Key Features
- Super Wide Angle Single Curved TG Panel with Exotic Wood: Offers a panoramic view and aesthetic appeal.
- Dual Chamber Design: Separates components for optimized cooling and cable management.
- Extensive Fan and Radiator Support: Accommodates three 140mm fans or two 160mm fans on top and bottom. Supports thick 360mm radiators on top, bottom, and side simultaneously.
- Back-Connect Motherboard Support: Designed for motherboards with rear-facing connectors for a cleaner interior.
- Full Cut-Out at Bottom with Interchangeable Fan Brackets: Enhances air intake and offers flexible fan configurations (120mm/140mm).
Image: The Antec C8 Curve Wood PC Case showcasing its super wide-angle single curved tempered glass panel and exotic wooden front panel.
Image: Diagram illustrating the vertical cooling capabilities and airflow within the Antec C8 Curve Wood PC Case.
Image: Detailed view of the bottom fan configuration options, including full cut-out design for enhanced air intake and support for 2x 160mm, 3x 140mm, or 3x 120mm fans.
Image: Illustration of the 0.8mm + 1.0mm thick steel construction and tool-free design for easy panel removal and assembly.
Image: The Antec C8 Curve Wood PC Case demonstrating support for three 360mm radiators simultaneously for advanced liquid cooling setups.
Image: Diagram showing the maximum thickness compatibility for radiators on the top (70mm), side (55mm/45mm), and bottom (135mm) of the Antec C8 Curve Wood PC Case.
Image: The Antec C8 Curve Wood PC Case illustrating graphics card installation, including support for wider RTX 40 series GPUs and vertical GPU riser brackets.
Image: Close-up of the I/O panel on the Antec C8 Curve Wood PC Case, featuring a mainstream Type-C (10Gbps) port, USB 3.0 ports, Mic/Audio 2-in-1 port, and dust plugs.
Image: Visual representation of the dual-chamber design in the Antec C8 Curve Wood PC Case, separating cooling for CPU/GPU from the PSU/Drive chamber with an airflow partition.
Image: Overview of the cable management features in the Antec C8 Curve Wood PC Case, including interior and rear velcro straps, and cable routing rubber grommets, with 90mm clearance.
Image: Illustration of power supply installation in the Antec C8 Curve Wood PC Case, showing the PSU bracket, rubber pad, and support for PSUs up to 210mm in length.
Image: The Antec C8 Curve Wood PC Case displaying its modular drive trays, supporting 2x SSDs and 1x HDD.
3. Setup and Installation
3.1 Unpacking and Initial Inspection
- Carefully remove the PC case from its packaging.
- Inspect the case for any signs of damage during transit. Contact your retailer immediately if any damage is found.
- Verify all accessories are present according to the packing list.
3.2 Panel Removal
The Antec C8 Curve Wood features a tool-free design for easy access to internal components.
- Side Panels (Glass and Mesh): Gently pull the panels from their top edge to release them from the chassis.
- Top Panel: Slide the top panel backward and lift to remove.
- Front Panel (Wood): The wooden front panel is integrated with the curved glass. Refer to the exploded view for guidance on separating components if necessary for advanced modifications.
Image: Exploded view of the Antec C8 Curve Wood PC Case, demonstrating how various panels and components can be detached for assembly.
3.3 Motherboard Installation
- Install the necessary motherboard standoffs into the motherboard tray.
- Carefully place your E-ATX or smaller motherboard onto the standoffs.
- Secure the motherboard with screws.
- For back-connect motherboards, ensure all necessary cables are routed through the designated cutouts in the motherboard tray.
3.4 Power Supply Unit (PSU) Installation
- Mount your PSU onto the stylish PSU bracket, ensuring the rubber pad is in place to prevent scratches.
- Slide the PSU and bracket into the dedicated compartment in the rear chamber.
- Secure the PSU with screws. The case supports PSUs up to 210mm in length and side-interface power supplies.
3.5 Storage Drive Installation
The case includes modular drive trays for flexible storage configurations.
- Install up to two 2.5" SSDs into the designated SSD trays.
- Install one 3.5" HDD into the HDD storage unit.
- Secure drives with appropriate screws.
3.6 Fan and Radiator Installation
The C8 Curve Wood offers extensive cooling options.
- Top/Bottom: Install up to three 140mm fans or two 160mm fans. Supports 360mm radiators (up to 70mm thick on top, 135mm thick on bottom).
- Side: Install up to three 120mm or two 140mm fans. Supports 360mm radiators (up to 55mm/45mm thick).
- Rear: Install one 120mm or 140mm fan.
- Utilize the full cut-out design at the bottom with interchangeable fan brackets for optimal air intake.
Image: Comprehensive chart detailing fan and radiator compatibility for the top, rear, side, and bottom of the Antec C8 Curve Wood PC Case.
3.7 Graphics Card (GPU) Installation
The case provides ample width to support wider RTX 40 series GPUs.
- Install your GPU into the appropriate PCIe slot on your motherboard.
- The case features 8 reusable PCIe slot covers.
- For vertical GPU installation, remove the standard PCIe slot covers and install a compatible vertical GPU riser bracket (sold separately).
3.8 Cable Management
The dual-chamber layout and integrated features simplify cable management.
- Utilize the interior velcro straps (x4) and rear velcro straps (x2) to bundle and secure cables.
- Route cables through the six rubber grommets for a clean look.
- The case offers 90mm clearance for cable management and 50mm clearance for right side radiator installation.
4. Operating Instructions
4.1 Powering On/Off
- Press the power button located on the top I/O panel to turn on your PC.
- To turn off, use the operating system's shutdown function or press and hold the power button for several seconds.
4.2 Using the I/O Panel
The top I/O panel provides convenient access to essential ports:
- USB 3.0 Ports (x2): For high-speed data transfer with compatible devices.
- Type-C (10Gbps) Port: For high-speed data transmission with modern Type-C devices.
- Mic/Audio 2-in-1 Port: Connect your headset or microphone.
- Reset Button: To restart your system.
- Dust Plugs: Use the provided dust plugs to protect unused ports from dust accumulation.
5. Maintenance
5.1 Cleaning Dust Filters
Regular cleaning of dust filters is crucial for maintaining optimal airflow and cooling performance.
- Power off your PC and disconnect it from the power source.
- Locate the dust filters (e.g., bottom, top, side panels).
- Gently remove the filters.
- Clean the filters using compressed air, a soft brush, or by rinsing with water (ensure they are completely dry before reinstallation).
- Reinstall the filters.
Image: View of the bottom dust filter on the Antec C8 Curve Wood PC Case, which can be easily removed for cleaning.
5.2 General Cleaning
- Use a soft, damp cloth to wipe down exterior surfaces. Avoid harsh chemicals.
- For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent streaks.
- For the wooden panel, use a wood-safe cleaner or a dry cloth.
6. Troubleshooting
This section addresses common issues you might encounter.
6.1 PC Not Powering On
- Ensure the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
- Check all internal power connections (24-pin ATX, 8-pin CPU, GPU power).
- Verify the front panel power button cable is correctly connected to the motherboard.
6.2 Poor Airflow/Overheating
- Ensure all installed fans are spinning and oriented correctly for optimal airflow (intake/exhaust).
- Clean all dust filters regularly.
- Verify that no cables are obstructing airflow paths inside the case.
- Check CPU cooler and GPU fan operation.
6.3 I/O Ports Not Functioning
- Ensure all front panel I/O cables (USB 3.0, Type-C, Audio) are securely connected to the correct headers on your motherboard.
- Check your motherboard's manual for correct header pinouts.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Antec |
| Model Name | C8 CURVE WOOD |
| Case Type | Full Tower |
| Motherboard Compatibility | Extended ATX |
| Material | Alloy Steel |
| Product Dimensions (LxWxH) | 18.26 x 18.74 x 11.92 inches |
| Item Weight | 23.8 pounds |
| Number of USB 3.0 Ports | 2 |
| Cooling Method | Air |
| Power Supply Mounting Type | Bottom Mount |
| Recommended Uses | Gaming-PCs, Workstations, Showcase-PCs |
8. Warranty and Support
Antec products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Antec website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Antec customer service through their official channels.
Antec Official Website: www.antec.com
9. Product Video
Video: An official product showcase of the Antec C8 Curve Wood PC Case, highlighting its design, features, and internal layout.
