Introduction
Thank you for choosing the BoxWave AccuPoint Active Stylus. This electronic stylus is designed to provide a precise and natural writing experience on your compatible touchscreen devices, such as the NordicTrack X16 Treadmill NTL29225. Its ultra-fine tip and active electronic pulses ensure accurate interaction without the need for Bluetooth pairing.
The BoxWave AccuPoint Active Stylus, shown alongside a compatible NordicTrack X16 Treadmill.
The AccuPoint Active Stylus is a versatile 2-in-1 stylus pen.
Product Features
- No Hassle Operation: No Bluetooth pairing required. Simply press the button to turn it on.
- AccuPoint Technology: Emits quick electronic pulses for natural interaction with your screen.
- Ultra Fine Tip: A precise 2mm tip for accurate tapping, swiping, and drawing.
- Long Battery Life: Built-in battery provides up to 12 hours of continuous use.
- Durable Construction: Solid brushed aluminum barrel for strength and stability.
- Rechargeable: Includes a MicroUSB cable for convenient charging.
- 2-in-1 Design: Features both an active fine tip and a FiberMesh tip for versatile use.
Key features of the AccuPoint Active Stylus, including its charging port, indicator light, and dual tips.
Overview of the stylus's core functionalities: active electronic signals, precise tip, superior FiberMesh tip, and rechargeable design.
Setup and Charging
Initial Setup
- Unpack: Carefully remove the AccuPoint Active Stylus and the included MicroUSB charging cable from the packaging.
- Charge: Before first use, it is recommended to fully charge the stylus.
Charging the Stylus
The AccuPoint Active Stylus features a built-in rechargeable battery. To charge:
- Locate the MicroUSB charging port on the stylus.
- Connect the included MicroUSB cable to the stylus's charging port.
- Connect the other end of the USB cable to any standard USB power source (e.g., computer USB port, USB wall adapter, power bank).
- The indicator light on the stylus will illuminate red during charging and turn green when fully charged. A blue light indicates the stylus is powered on.
A full charge provides approximately 12 hours of use.
The stylus charging port and indicator light, showing different light colors for power and charge status.
The stylus can be conveniently charged using any standard USB power source, such as a laptop.
Operating Instructions
Powering On/Off
- To turn on the stylus, simply press the button located on the barrel. The indicator light will turn blue.
- To turn off the stylus, press the button again. The blue indicator light will turn off.
Using the Stylus
The AccuPoint Active Stylus does not require Bluetooth pairing. It interacts with your screen using electronic pulses.
- Ensure the stylus is powered on (blue indicator light).
- Hold the stylus like a regular pen.
- Use the ultra-fine tip for precise interactions such as writing, drawing, or selecting small icons.
- The FiberMesh tip can be used for general navigation, tapping, and swiping, offering a smooth experience.
Note: The AccuPoint Active Stylus does not support Palm Rejection or Pressure Sensitivity.
The stylus provides higher accuracy and sensitivity for precise interactions on your device.
Using the stylus for precise navigation and selection on a touchscreen device.
The AccuPoint Active Stylus allows for natural tapping, swiping, and writing without pairing.
Maintenance
Cleaning
- To clean the stylus, gently wipe the barrel with a soft, dry, lint-free cloth.
- Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the stylus.
Tip Replacement (if applicable)
The FiberMesh tip is removable. If it becomes worn or damaged, it can be replaced. Contact BoxWave support for replacement tips.
Storage
Store the stylus in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from liquids and sharp objects to prevent damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stylus not responding | Battery is low or depleted. Stylus is off. | Charge the stylus fully. Press the power button to turn it on (blue light should appear). |
| Inaccurate or inconsistent response | Screen is dirty. Stylus tip is worn. | Clean your device's screen. Inspect the stylus tip for wear; replace FiberMesh tip if necessary. |
| Stylus not charging | Charging cable or power source issue. | Ensure the MicroUSB cable is securely connected. Try a different USB port or power adapter. |
If you continue to experience issues, please contact BoxWave customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Name | AccuPoint Active Stylus |
| Compatibility | Universal for capacitive touchscreens, including NordicTrack X16 Treadmill NTL29225 |
| Tip Size | 2mm (Ultra Fine Tip) |
| Battery Life | Up to 12 hours of use |
| Charging Port | MicroUSB |
| Material | Brushed Aluminum Barrel |
| Weight | 1.3 ounces (approx. 36.85 grams) |
| ASIN | B0DK7QRWMT |
| Manufacturer | BoxWave |
| Country of Origin | China |
Visual representation of the stylus's key features and specifications.
Warranty and Support
Warranty Information
BoxWave products are designed for quality and durability. For specific warranty details regarding your AccuPoint Active Stylus, please refer to the warranty card included with your purchase or visit the official BoxWave website.
Customer Support
If you have any questions, concerns, or require technical assistance, please contact BoxWave customer support:
- Website: www.boxwave.com (Check for support contact information)
- Email: Refer to BoxWave's official website for the most current contact email.
- Phone: Refer to BoxWave's official website for the most current contact phone number.
Please have your product model and purchase date ready when contacting support.