Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Spigen TS35-1 Dashboard & Windshield Car Mobile Holder. This versatile mount is designed to securely hold most smartphone devices on either your car's dashboard or windshield, offering adjustable viewing angles and easy one-handed operation.
Product Overview
The Spigen TS35-1 Car Mobile Holder securely mounted on a car dashboard, holding a smartphone.
Illustration showing the 2-in-1 universal mounting capability for both dashboard and windshield.
Setup Instructions
- Prepare the Surface: To ensure maximum adhesion, thoroughly clean the desired attachment surface on your dashboard or windshield. The surface must be flat and free from dust, oils, and debris. Avoid fabric materials or uneven surfaces, as adhesion may be difficult.
- Attach the Mount: Remove the protective film from the suction cup. Press the suction cup firmly onto the clean surface and engage the locking lever to create a strong vacuum seal.
- Allow Adhesion Time: After installation, avoid placing any items on the mount for the first 24 hours. This allows the adhesive gel on the suction cup to bond optimally with the surface, ensuring a secure and stable hold.
- Adjust Position: Use the adjustable arm and rotating head to position the mount for optimal viewing comfort and accessibility.
Close-up view of the powerful suction cup mechanism designed for sturdy dashboard attachment.
Detail of the silicone padded bracket arms, adjustable width feature, and solid foot support for secure device holding.
Operating Instructions
- Mounting Your Device: Gently press the side arms to open the bracket. Place your smartphone into the holder and release the arms to secure it. The silicone padded bracket arms provide a firm grip without scratching your device.
- Adjusting Viewing Angle (360° Rotation): The holder features a 360-degree rotatable head. Loosen the collar behind the phone cradle, adjust your device to the desired portrait or landscape orientation, and then tighten the collar to lock it in place.
- Adjusting Arm Length and Height: The telescopic arm allows for length and height adjustments. Loosen the adjustment bolt on the arm, extend or retract the arm to your preferred length, and then tighten the bolt. The vertical angle can also be adjusted for optimal viewing.
- One-Handed Operation: The design facilitates effortless device placement and removal with one hand, allowing you to remain focused on driving.
The mounting pad rotates 360 degrees, allowing for maximum flexibility in viewing angle.
The extendable arm allows for optimal positioning, enhancing safety during navigation and hands-free calls.
Maintenance
The suction cup of your Spigen TS35-1 mount is washable and reusable. If the adhesion weakens due to dust or debris, simply rinse the suction cup under warm water and let it air dry completely. Do not use any cleaning agents or abrasive materials, as this may damage the adhesive properties. Once dry, the suction cup will regain its strong adhesive capabilities.
The dashboard pad is reusable and can be restored by simply washing it with water.
Troubleshooting
- Mount Not Sticking Securely:
- Ensure the attachment surface is clean, dry, and flat.
- Verify that the suction cup locking lever is fully engaged.
- Allow 24 hours after initial installation for optimal adhesion.
- If the suction cup is dirty, wash it as per the maintenance instructions.
- Device Wobbles or Feels Unstable:
- Ensure your smartphone is properly seated and secured by the bracket arms.
- Check that all adjustment bolts and collars (for rotation and arm length) are tightened.
- Verify the suction cup is firmly attached to the surface.
- Bracket Release Button Not Functioning:
- Inspect the button for any obstructions.
- If the button mechanism feels loose or unresponsive, contact customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | Spigen |
| Model Name | TS35-1 |
| Model Number | ACP08312 |
| Colour | Black |
| Mounting Type | Dashboard, Windshield |
| Compatible Devices | Most smartphones from 4.7" to 6.9" inch devices (e.g., iPhone 17/16/15/14/13/12 series, Samsung Galaxy series, iQOO, Redmi, Oneplus, Pixel, Oppo) |
| Product Features | Hand Free, 360° Rotational, Adjustable Height & Length |
| Item Dimensions | 10.4 x 6.7 x 14.8 Centimeters |
| Item Weight | 167.6 Grams |
| Enclosure Material | Plastic |
| Country of Origin | China |
| Box Contents | Car Mount |
Warranty
This Spigen TS35-1 Car Mobile Holder comes with a 6-month warranty against manufacturer defects only. Please retain your proof of purchase for warranty claims.
Support
For any inquiries, technical assistance, or warranty claims, please contact Spigen customer support:
- Spigen India Private Limited: NO.295 - 296, Ecotech-1, Extension, Greater Noida, Uttar Pradesh 201310, India
- Spigen Korea Co., Ltd.: SpigenHQ, 446, Bongeunsa-ro, Gangnam-gu, Seoul, Rep. of Korea