BORNMIO Replacement Battery Instruction Manual

1. Important Safety Information

Read and understand all safety instructions before using this replacement battery. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do Not Disassemble: Do not attempt to disassemble, open, or service the battery pack. There are no user-serviceable parts inside.
• Use Correct Replacement: Replace only with the battery pack designated for your specific Shark vacuum model. Using an incompatible battery may cause damage or safety hazards.
• Handle with Care: Do not crush, puncture, or short external contacts of the battery. Avoid dropping the battery.
• Avoid Extreme Temperatures: Do not expose the battery to fire or water. Do not store the battery above 60°C (140°F). High temperatures can damage the battery and pose a fire risk.
• First Use: For optimal performance and longevity, fully charge the new battery pack before its first use.

Image: Close-up view of the battery label, displaying important safety warnings, model number (CS-SHC640VX), part number (XBATR725), rating (25.2VDC, 2000mAh, 50.4Wh), and manufacturing details. This label emphasizes not to disassemble, crush, puncture, or expose to fire/water, and to store below 60°C (140°F).

2. Product Overview

This BORNMIO replacement battery is designed to provide reliable power for your compatible Shark Cordless Vertex Pro Stick Vacuum. It offers a capacity of 2000mAh and operates at 25.2V, ensuring consistent performance.

2.1 Compatibility

This battery is fully compatible with the following Shark vacuum models and battery part numbers:

Compatible Vacuum Models:

• IZ320UKT
• IZ320EU
• IZ300UKT
• IZ862HC
• IZ662H V5
• IZ320
• IZ320UK
• IZ862H
• IZ640H
• IZ300UK
• Cordless Vertex Pro Stick Vacu
• IZ840H
• IZ300EU
• IZ300EUT

Compatible Battery Part Numbers:

• XBATR725
• XBATR725SL

Image: An angled view of the BORNMIO replacement battery, showcasing its overall shape and connection points. This is the primary view of the product.

3. Setup and Installation

Follow these steps to safely install the replacement battery into your Shark Cordless Vertex Pro Stick Vacuum.

1. Power Off and Unplug: Ensure your vacuum cleaner is completely powered off and unplugged from any charging source before attempting battery replacement.
2. Locate Battery Compartment: Refer to your Shark vacuum's original manual to locate the battery compartment. This is typically on the main body of the vacuum.
3. Remove Old Battery: Press any release buttons or latches to unlock and remove the old battery pack. Dispose of the old battery responsibly according to local regulations.
4. Insert New Battery: Align the new BORNMIO replacement battery with the compartment and slide it in until it clicks securely into place. Ensure it is fully seated and locked.
5. Initial Charge: Place the vacuum on its charging dock or connect the charger. Allow the new battery to fully charge before its first use.

Image: Top-down view of the BORNMIO replacement battery, showing the top surface and the connection interface that slots into the vacuum cleaner.

4. Operating Instructions

This section provides guidance on charging and using your new replacement battery.

4.1 Charging the Battery

• Always use the original Shark charger provided with your vacuum cleaner.
• Connect the vacuum to its charging dock or directly plug in the charger.
• The charging indicator lights on your vacuum will typically show the charging status. Refer to your vacuum's manual for specific light patterns.
• Allow the battery to fully charge before each use for optimal run time.

4.2 Using the Vacuum

• Once fully charged, disconnect the vacuum from the charger.
• Operate your vacuum as you normally would, following the instructions in your Shark vacuum's user manual.
• The battery provides consistent power until it is depleted.

5. Maintenance and Storage

Proper care and storage will extend the life of your replacement battery.

• Regular Charging: Do not allow the battery to remain fully discharged for extended periods. Recharge it promptly after use.
• Long-Term Storage: If storing the battery for an extended period (more than one month), charge it to approximately 50-60% capacity. Store it in a cool, dry place, away from direct sunlight and extreme temperatures.
• Cleaning: Keep the battery contacts clean and free of dust or debris. Use a dry, soft cloth to wipe the battery if necessary. Do not use liquids or abrasive cleaners.
• Temperature: Avoid exposing the battery to temperatures below 0°C (32°F) or above 45°C (113°F) during operation or storage.

Image: Bottom view of the BORNMIO replacement battery, showing the underside and any additional features or markings not visible from the top.

6. Troubleshooting

If you encounter issues with your replacement battery, refer to the following common problems and solutions.

• Battery Not Charging:
  • Ensure the battery is correctly seated in the vacuum and the charger is properly connected to both the vacuum and a working power outlet.
  • Check the charger and charging port for any visible damage or debris.
  • Verify that the power outlet is functional by testing it with another device.
• Short Run Time:
  • Ensure the battery is fully charged before each use.
  • Operating the vacuum in high-power modes or with clogged filters can reduce run time. Clean filters and check for obstructions.
  • Battery performance can naturally degrade over many charge cycles.
• Vacuum Not Turning On:
  • Confirm the battery is fully charged and securely installed.
  • Check your vacuum's power switch and other controls.
  • If the issue persists, consult your Shark vacuum's original manual for specific troubleshooting steps related to the vacuum itself.

If these steps do not resolve the issue, please contact customer support.

7. Specifications

Detailed technical specifications for the BORNMIO replacement battery.

Image: Side view of the BORNMIO replacement battery, illustrating its profile and thickness.

8. Warranty and Support

BORNMIO is committed to providing high-quality products and customer satisfaction.

8.1 Quality Assurance

All BORNMIO batteries undergo strict quality inspection and are certified with ISO9001, RoHS, CE, UN38.3, and MSDS standards, ensuring safety and reliability.

8.2 Customer Support

If you have any questions, concerns, or require assistance with your BORNMIO replacement battery, please do not hesitate to contact us. We offer a full refund or a free replacement without any reason if you encounter issues with our products.

Please refer to your purchase documentation or the seller's contact information for details on how to reach customer support.