Introduction
Welcome to your new Bestier Cross Legged Office Chair. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your chair. Please read this manual thoroughly before assembly and use.
Setup
Package Contents
Before beginning assembly, verify that all components are present and undamaged. Refer to the parts list provided in the packaging. If any parts are missing or damaged, please contact Bestier customer support.
Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.
- Step 1: Attach Casters to Base. Insert the five silent 360° swivel casters into the holes at the end of each leg of the heavy-duty metal base. Ensure they are securely seated.
- Step 2: Install Gas Lift. Place the gas lift cylinder into the center hole of the assembled base.
- Step 3: Attach Seat Mechanism. Secure the seat mechanism to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism aligns with the front of the seat.
- Step 4: Connect Seat to Gas Lift. Carefully place the assembled seat onto the gas lift cylinder, ensuring it is centered and stable.
- Step 5: Attach Backrest. Connect the backrest to the seat mechanism using the designated bolts. Tighten all connections securely.
- Step 6: Install Armrests. Attach the flippable armrests to the sides of the seat and backrest. Ensure they are firmly attached.
For visual guidance, please refer to the detailed diagrams in the included paper manual.
Operating Your Chair
Adjusting Seat Height
To adjust the seat height (20.2" - 23.2"), locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the chair, or pull the lever up while standing to raise the chair. Release the lever at your desired height.
Reclining Backrest
The backrest can recline up to 135°. To recline, pull the lever on the left side beneath the seat. Lean back to your desired angle and release the lever to lock the position. To return to an upright position, pull the lever again and lean forward.
Flippable Armrests
The armrests are designed to flip from 90° (upright) to 180° (flat). To adjust, gently push the armrests inward towards the seat before flipping them outward. This allows for comfortable cross-legged sitting or easy storage under desks. Important: When armrests are laid flat at 180°, it is not permitted to stand or place heavy objects on the armrests.
Image: The Bestier Cross Legged Office Chair demonstrating the adjustable armrest flip function, showing both the upright (90°) and flat (180°) positions. Note the warning about pushing armrests inward before flipping.
Image: A side view of the Bestier Cross Legged Office Chair illustrating the 90°-135° reclining backrest adjustment and the seat height adjustment range. Also shows the 360° swivel capability.
360° Swivel and Casters
The chair features a 360° swivel seat and silent casters for smooth movement across various floor types without causing damage.
Maintenance
Cleaning Instructions
The velvet fabric of this chair should be wiped clean with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the fabric. For spills, blot immediately with a clean cloth.
General Care
- Regularly check all bolts and screws to ensure they remain tight. Retighten as necessary.
- Keep the chair away from direct sunlight and heat sources to prevent fading and material degradation.
- Avoid placing sharp objects on the chair's surface to prevent tears or scratches.
- Do not exceed the maximum weight recommendation of 264 lbs.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not adjust height. | Gas lift cylinder not properly installed or damaged. | Ensure gas lift is fully inserted into the base and seat mechanism. If issue persists, contact customer support for replacement. |
| Armrests do not flip smoothly. | Armrests not pushed inward before flipping. | Gently push the armrests inward towards the seat before attempting to flip them outward. |
| Chair wobbles or feels unstable. | Loose bolts or uneven assembly. | Check and tighten all assembly bolts. Ensure the chair is on a flat, even surface. |
| Casters not rolling smoothly. | Debris caught in casters or casters damaged. | Clean any hair or debris from the caster wheels. If damaged, consider replacing casters. |
Specifications
- Brand: Bestier
- Model Name: H200294B
- Color: Black
- Product Dimensions: 31"D x 37"W x 42.9"H
- Seat Height Adjustment: 20.2" - 23.2"
- Reclining Angle: 90° - 135°
- Maximum Weight Recommendation: 264 Pounds
- Material: Velvet (Surface), High Density Sponge, Spring Cushioning (Fill), Metal (Base)
- Special Features: Flippable Armrests, Reclining, 360° Swivel, Silent Casters
- UPC: 840408629089
Image: Detailed product dimensions of the Bestier Cross Legged Office Chair, including width, depth, height, seat height range, and weight capacity (264 lbs).
Image: An annotated diagram highlighting key features of the Bestier Cross Legged Office Chair, such as the thick padded headrest, wide backrest, wide seat cushion for cross-legged seating, robust arched metal legs, and 360° swivel silent casters.
Image: A cutaway view illustrating the construction of the Bestier Cross Legged Office Chair's thick velvet cushion, showing the premium velvet surface, high-density sponge, and spring cushioning support for enhanced comfort.
Warranty and Customer Support
Bestier is committed to providing quality products and excellent customer service. If you encounter any issues with your chair, please do not hesitate to contact us.
- Easy Assembly & Customer Support: We provide clear installation instructions and all necessary parts for easy assembly. If you have any questions about our office chair, please feel free to contact us, we are committed to providing you with timely and useful support.
- Returns: This product typically offers 30-day easy returns. Please refer to your purchase platform for specific return policies.
For further assistance, please visit the official Bestier store or contact their customer service directly. Contact information can usually be found on the Bestier website or through your purchase receipt.
Bestier Store: Visit Bestier Store on Amazon
