AQQA Automatic Aquarium Fish Feeder (Model AQ130) Instruction Manual

1. Introduction

Thank you for choosing the AQQA Automatic Aquarium Fish Feeder. This device is designed to provide convenient and reliable feeding for your aquarium fish, especially when you are away. Please read this manual carefully before use to ensure proper operation and longevity of your feeder.

2. Product Overview

The AQQA Automatic Fish Feeder features a 250ml capacity food container and adjustable feeding settings. It is constructed from food-grade ABS material for the health and safety of your fish.

Components:

• Food Container (250ml capacity)
• Feeder Unit with Control Buttons
• Adjustable Feeding Outlet
• Fixed Holder (for tank mounting)

Figure 2.1: Overview of the AQQA Automatic Fish Feeder showing the food container, control buttons, timing display, fixed holder, and food outlet.

Figure 2.2: Illustration of the feeder's food-grade ABS material and 250ml capacity container, highlighting its moisture-proof design and secure fixed holder.

3. Setup and Installation

Follow these steps to set up your AQQA Automatic Fish Feeder:

1. Fill the Food Container: Open the lid of the food container and fill it with your desired fish food (pellets, chips, bars, or flakes). Ensure the lid is closed tightly after filling.


Figure 3.1: Step-by-step installation guide. Image 1 shows filling the food container and closing the lid.

2. Assemble the Fixed Holder: Attach the fixed holder to the main feeder unit.


Figure 3.2: Step-by-step installation guide. Image 2 shows splicing the fixed holder to the feeder unit.

3. Adjust Feeding Quantity: Use the gear switch on the side of the feeder to adjust the size of the food outlet, controlling the amount of food dispensed.

Figure 3.3: Step-by-step installation guide. Image 3 shows adjusting the feed quantity using the gear switch.
4. Adjust Holder Width: Adjust the width of the fixed holder to securely fit your aquarium glass. The maximum compatible glass thickness is 1.0 inch (25mm).


Figure 3.4: Step-by-step installation guide. Image 4 shows adjusting the width of the fixed holder.

5. Install Batteries: Open the battery compartment and insert the required batteries (not included). Ensure correct polarity.


Figure 3.5: Step-by-step installation guide. Image 5 shows installing batteries into the compartment.

6. Mount the Feeder: Fix the feeder in a suitable position on your fish tank, ensuring the food outlet is above the water surface and food can drop freely.

Figure 3.6: Step-by-step installation guide. Image 6 shows fixing the feeder in position on the fish tank.

Figure 3.7: The AQQA Automatic Fish Feeder installed on an aquarium, dispensing food.

4. Operating Instructions

The feeder offers both automatic and manual feeding modes.

4.1 Automatic Feeding

To set the automatic feeding schedule:

• Short press the ON/OFF/Timing button to cycle through the available timing modes: 8H (every 8 hours), 12H (every 12 hours), 24H (every 24 hours), or 48H (every 48 hours).
• The selected timing mode will be displayed on the feeder. The feeder will dispense food automatically at the set intervals.

4.2 Manual Feeding

To manually dispense food:

• Press the power switch (ON/OFF/Timing button) when the feeder is on. This will dispense a single portion of food immediately.
• Note: There must be an interval of more than 30 seconds between two manual feedings.

Figure 4.1: Close-up of the feeder's control panel, showing the timing display and ON/OFF/Timing button for both automatic and manual feeding.

Figure 4.2: The feeder is compatible with various fish food types such as pellets, chips, bars, and flakes. The food outlet can be adjusted to suit different food sizes.

5. Maintenance

• Cleaning: Regularly clean the food container and the food outlet to prevent blockages and ensure hygienic feeding. Use a soft, damp cloth. Do not immerse the main feeder unit in water.
• Battery Replacement: Replace batteries when the feeder's performance declines or the display indicates low power.
• Food Storage: Ensure fish food is dry before loading into the feeder to prevent clumping, especially with flake food. For flakes, it is recommended to cut them smaller for even distribution.

6. Troubleshooting

7. Specifications

Figure 7.1: Detailed dimensions of the AQQA Automatic Fish Feeder.

8. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact AQQA customer service through the retailer where the product was purchased. Keep your purchase receipt for warranty claims.