SUPRENT HC246 Cordless Waterproof Hair Clipper and Trimmer Set User Manual

1. Introduction

Thank you for choosing the SUPRENT HC246 Cordless Waterproof Hair Clipper and Trimmer Set. This comprehensive grooming kit is designed for precision hair cutting and beard trimming, offering convenience and versatility for both wet and dry use. Please read this manual thoroughly before operating the device to ensure safe and optimal performance.

Image 1.1: The SUPRENT HC246 Hair Clipper and Trimmer Set.

2. Safety Warnings

To reduce the risk of injury, electric shock, fire, or damage to the product, always observe the following safety precautions:

• Always use with caution near the face and body.
• Keep out of reach of children.
• Do not ingest or inhale small parts.
• Always unplug the device and allow it to cool before cleaning.
• Adult supervision is required when children are present.
• Do not immerse the charging cable or adapter in water.
• Do not use the device if it is damaged.

3. Package Contents

Verify that all items are included in your package:

• Hair Clipper
• Hair Trimmer
• 11 Guide Combs
• USB Charging Cable
• Cleaning Brush
• Lubricating Oil
• Storage Case
• User Manual

4. Product Features

• Complete Haircut Set: Includes a powerful hair clipper and a precision trimmer, along with 11 guide combs for various lengths and styles.
• Ultra-Sharp Ceramic Blade: Features titanium-coated ceramic and stainless steel blades for superior sharpness and durability. The 7000 RPM motor ensures efficient cutting without pulling or skin irritation.
• Quiet Operation: Engineered for low noise output (approximately 53 dB), making it suitable for use with children.
• IPX7 Waterproof and Cordless: Allows for convenient wet or dry shaving, including use in the shower. The cordless design provides flexibility and ease of use.
• Type-C Rechargeable: Equipped with a Lithium-ion battery, offering up to 210 minutes of continuous use on a single 3-hour charge. Features a smart digital display for battery level indication.
• Innovative Design: Utilizes In-Mold Decoration (IMD) technology for a sleek, corrosion-resistant metal exterior. The lightweight design (approx. 283.5g) reduces wrist and shoulder fatigue during use.

Image 4.1: Versatility for various hairstyles and beard trimming.

Image 4.2: Close-up of the titanium-coated ceramic blade.

5. Setup

5.1 Charging the Device

1. Ensure the device is turned off before charging.
2. Connect the Type-C USB charging cable to the charging port on the bottom of the clipper/trimmer.
3. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a computer USB port.
4. The smart digital display will indicate the charging status. A full charge takes approximately 3 hours and provides up to 210 minutes of runtime.

Image 5.1: Type-C charging and digital display.

5.2 Attaching and Removing Guide Combs

1. Select the desired guide comb for your preferred hair length.
2. Align the comb with the blade and push it firmly until it clicks into place.
3. To remove, gently pull the comb away from the blade.

5.3 Adjusting Blade Length (Clipper Only)

The main clipper features an adjustable lever for fine-tuning cutting lengths between 1.1mm and 1.6mm without a guide comb. Move the lever up or down to select the desired length.

6. Operating Instructions

6.1 Powering On/Off

Press the power button once to turn the device on. Press it again to turn it off.

6.2 Using the Hair Clipper

1. Ensure hair is clean and dry (unless performing a wet cut).
2. Attach the appropriate guide comb or adjust the blade lever to your desired length.
3. Hold the clipper with the blade facing upwards and move it against the direction of hair growth.
4. Use smooth, even strokes for consistent results.

6.3 Using the Trimmer

The trimmer is ideal for detailing, outlining, carving, fading, and creating sharp beard lines.

1. Use the trimmer without a guide comb for close cuts and precise lines.
2. Hold the trimmer at a slight angle to the skin and gently guide it along the desired area.

6.4 Wet and Dry Use

The IPX7 waterproof rating allows for both dry and wet shaving. For a comfortable wet shave, you may use shaving foam or gel. Always ensure the charging port is dry before connecting the charging cable.

Image 6.1: The SUPRENT HC246 is IPX7 waterproof for wet and dry use.

Image 6.2: Quiet operation for a stress-free haircut experience.

7. Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and optimal performance of your device.

7.1 Cleaning the Blades

1. Turn off the device and detach any guide combs.
2. Rinse the blades under running water. The IPX7 waterproof design allows for easy cleaning.
3. Use the included cleaning brush to remove any stubborn hair particles.
4. Shake off excess water and allow the blades to air dry completely before reattaching or storing.

7.2 Lubrication

After every few uses, apply a small drop of the included lubricating oil to the blades. Turn on the device for a few seconds to distribute the oil evenly. This helps maintain blade sharpness and smooth operation.

7.3 Storage

Store the clipper and trimmer set in the provided storage case in a cool, dry place, away from direct sunlight and moisture. Ensure the device is fully charged before long-term storage.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information, please refer to the documentation included with your purchase or contact SUPRENT customer support directly. If you encounter any issues not covered in this manual, please reach out to the manufacturer's support team for assistance.

You can typically find contact information on the official SUPRENT website or through your retailer.