Retekess TH109
Contents
Retekess TH109 Rechargeable Caregiver Pager Instruction Manual
Model: TH109
Introduction
The Retekess TH109 Rechargeable Caregiver Pager system is designed to provide reliable communication between a caregiver and an individual requiring assistance. This manual provides detailed instructions for setting up, operating, and maintaining your TH109 system to ensure optimal performance and safety.
Package Contents
Verify that all items are present in your package:
- TH109 Receiver (1 unit)
- Call Button (1 unit)
- Lanyard (1 unit)
- Belt Clip (1 unit)
- Charging Cable (1 unit)
- Charging Base (1 unit)
- User Manual (1 unit)
- Sling (1 unit)
- Wall Adhesive (1 unit)

Product Overview
The Retekess TH109 system consists of a portable receiver and a call button. The receiver features a display, volume controls, and a charging port. The call button is designed for easy activation by the user.

Setup
1. Charging the Receiver
Before initial use, fully charge the receiver. The TH109 receiver supports two charging methods:
- Charging Base: Place the receiver into the provided charging base.
- Type-C Port: Connect the charging cable directly to the Type-C port on the receiver.

2. Pairing Call Buttons
The TH109 receiver can be paired with up to 30 call buttons. Follow these steps to pair a call button:
- Ensure the receiver is powered on.
- Press and hold the pairing button on the receiver (refer to the product diagram for exact location).
- While holding the pairing button, press the call button you wish to pair.
- The receiver will indicate successful pairing (e.g., a specific sound or light pattern).

3. Mounting Options
The receiver and call button offer various placement options for convenience:
- Receiver: Can be placed on its charging base, or carried using the belt clip.
- Call Button: Can be worn with the lanyard, attached to a surface using the wall adhesive, or carried in a pocket.

Operating Instructions
1. Making a Call
To alert the caregiver, simply press the "CALL" button on the call button. The receiver will activate its alarm based on the selected alarm mode.

2. Adjusting Volume
The receiver has adjustable volume levels (0-5). Use the volume buttons on the side of the receiver to increase or decrease the alert volume.
3. Setting Alarm Modes and Ringtones
The TH109 offers 7 alarm modes and 18 ringtone options. You can customize the alert type (sound, light, vibration, or a combination) and the specific ringtone to suit your preferences.
- Alarm Modes: Ringtone + Light + Vibration, Ringtone + Vibration, Light + Vibration, Ringtone + Light, Ringtone Only, Light Only, Vibration Only.
- Ringtones: Choose from 18 distinct melodies.

4. Low Battery Reminder
The receiver provides a low battery alert when the battery level drops below 20%. This ensures timely recharging and prevents communication interruptions.

5. Power-off Memory Function
The TH109 receiver retains its settings even after being powered off. There is no need to reset configurations after rebooting the device.

6. Anti-mistouch Setting
To prevent accidental calls, the TH109 includes a settings lock feature. This helps avoid unintended activations of the call button.

7. Multi-extension Calling
When multiple call buttons are paired, the system supports multi-extension calling. The call signal holds for 15 seconds, ensuring the caregiver is alerted even if multiple calls are made simultaneously.
Maintenance
To ensure the longevity and proper functioning of your Retekess TH109 system, follow these maintenance guidelines:
- Cleaning: Wipe the receiver and call button with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Battery Care: Recharge the receiver regularly, especially when the low battery alert is activated. For the call button, replace the battery as needed.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Receiver does not respond to call button. |
|
|
| Receiver alarm is too quiet or too loud. | Volume setting is incorrect. | Adjust the volume using the side buttons on the receiver. Refer to "Adjusting Volume". |
| Settings are lost after powering off. | This should not occur due to power-off memory. Ensure the device is not factory reset. | If this issue persists, contact customer support. |
Specifications
- Model: TH109
- Brand: Retekess
- Transmission Range: 850 ft / 260 m (open area)
- Receiver Battery: 2 Lithium Ion batteries (included)
- Control Method: Touch
- Item Weight: 1.17 pounds
- Product Dimensions: 9.05 x 8.07 x 4.9 inches
- Alarm Types: Sound, Light, Vibration (7 modes)
- Ringtones: 18 options
- Charging: Charging base and Type-C port
- Features: Low battery alert, Power-off memory, Anti-mistouch setting
Warranty and Support
Retekess provides a 2-year warranty and a 30-day no-reason return policy. Beyond the warranty period, maintenance services are offered, with buyers responsible for associated costs. For support, contact Retekess on Amazon; inquiries will be responded to within 12 hours.
For further assistance, please visit the official Retekess store: Retekess Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.