Wondise H-BLBXR-3

Wondise Snowman Glass Flameless Candles Instruction Manual

Model: H-BLBXR-3

Product Overview

The Wondise Snowman Glass Flameless Candles provide a safe and decorative lighting solution for indoor spaces. This set includes three flameless LED candles, each encased in a glass shell featuring a festive snowman and winter scene design. They are designed to mimic the flickering glow of traditional candles without the associated fire hazards, smoke, or wax mess. The candles are battery-operated and come with a remote control for convenient operation, including timer functions.

Three Wondise Snowman Glass Flameless Candles of varying heights (4, 5, and 6 inches) with a winter scene design, illuminated and placed on a surface.

Image: The set of three Wondise Snowman Glass Flameless Candles, showcasing their different heights and illuminated state.

Package Contents

  • 3 x Wondise Snowman Glass Flameless Candles (4", 5", 6" height)
  • 1 x Remote Control
  • Note: 2 AA batteries are required for each candle (total 6 AA batteries) and are not included.

Setup Instructions

1. Battery Installation

  1. Locate the battery compartment at the bottom of each candle.
  2. Open the battery cover by sliding or twisting it according to the markings.
  3. Insert two (2) AA batteries into each candle, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery cover securely.
  5. Repeat for all three candles.
Close-up of the bottom of a Wondise flameless candle showing the battery compartment with two AA batteries inserted and an ON/OFF switch. The remote control is also visible next to it.

Image: Battery compartment and ON/OFF switch on the candle base, with the remote control.

2. Initial Power On

After installing batteries, slide the ON/OFF switch located on the bottom of each candle to the "ON" position. The candles should illuminate.

Operating Instructions

The included 10-key remote control allows for convenient operation of your Wondise Flameless Candles. Ensure the candles' bottom switch is in the "ON" position for remote functionality. The remote has a range of approximately 20 feet.

Remote Control Functions:

ButtonFunction
ONTurns all paired candles ON.
OFFTurns all paired candles OFF.
BRIGHTNESS (+)Increases the brightness of the LED flame.
BRIGHTNESS (-)Decreases the brightness of the LED flame.
FLICKERActivates or deactivates the flickering effect.
2H / 4H / 6H / 8HSets the timer for 2, 4, 6, or 8 hours. Once set, the candles will automatically turn off after the selected duration and turn on again at the same time the next day, cycling every 24 hours.

Timer Function Note: To reset the timer, turn the candles OFF and then ON again using the remote, and then select a new timer duration.

Maintenance

  • Cleaning: Wipe the glass surface with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
  • Battery Replacement: When the light dims or the candles stop responding to the remote, it's time to replace the batteries. Always replace all batteries in a candle at the same time with new AA batteries.
  • Storage: If storing the candles for an extended period, remove all batteries to prevent leakage and corrosion. Store in a cool, dry place.
  • Indoor Use Only: These candles are designed for indoor use. Avoid exposure to direct sunlight, extreme temperatures, or moisture.

Troubleshooting

ProblemSolution
Candles do not turn on.
  • Ensure the ON/OFF switch on the bottom of each candle is in the "ON" position.
  • Check if batteries are inserted correctly with the correct polarity.
  • Replace old batteries with new AA batteries.
Remote control is not working.
  • Ensure the candles' bottom switch is "ON".
  • Check the battery in the remote control (usually a button cell battery).
  • Ensure there are no obstructions between the remote and the candles.
  • Operate the remote within the specified range (approx. 20 feet).
Candle light is dim or inconsistent.
  • Replace the batteries in the affected candle(s).
  • Use the brightness (+) button on the remote to increase light intensity.
Timer function is not working as expected.
  • Ensure the timer was set correctly (e.g., press 4H for 4 hours).
  • To reset the timer, turn the candles OFF and then ON using the remote, then re-select the desired timer duration.

Specifications

FeatureDetail
BrandWondise
Model NumberH-BLBXR-3
MaterialReal Wax, Glass Shell
Light Source TypeLED
Light ColorCold White
Candle Dimensions (Diameter x Height)3" x 4", 3" x 5", 3" x 6" (approximate)
Power SourceBattery Powered (2 x AA batteries per candle, not included)
Battery LifeApproximately 300 hours (with quality batteries)
Control MethodRemote Control
Timer Functions2H, 4H, 6H, 8H (24-hour cycle)
Indoor/Outdoor UsageIndoor Use Only
Water Resistance LevelNot Water Resistant

Warranty and Support

Wondise products are thoroughly tested before leaving the factory. For any issues or support inquiries regarding your Wondise Snowman Glass Flameless Candles, please contact Wondise customer support. Refer to your purchase documentation or the Wondise official website for specific warranty details and contact information.

Manufacturer: Wondise

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.