Introduction
Thank you for choosing the Sealy Electric Blanket. This manual provides essential information for the safe and efficient use of your new heated blanket. Please read all instructions carefully before use and retain this manual for future reference.
Safety Information
Your Sealy Electric Blanket is ETL & FCC certified, ensuring lower electromagnetic radiation and includes safety features to prevent overheating. The insulated heating wire monitors real-time temperature for consistent and safe warmth.
- Do not use if wet.
- Do not dry clean.
- Do not bleach.
- Always disconnect the controller and power cable before washing.
- Ensure the blanket is completely dry before reconnecting to power.
Setup
- Unpack: Carefully remove the electric blanket and its components from the packaging.
- Placement: Lay the blanket flat on your bed, ensuring it is evenly spread and not bunched or folded. The blanket should be placed directly on top of your mattress pad or sheet, and then covered with your top sheet and other bedding.
- Connect Controllers: For Queen and King sizes, two controllers are provided. Connect each controller's cord securely to the corresponding port on the blanket. Ensure a firm connection.
- Plug In: Plug the power cords from the controllers into a standard 120V AC electrical outlet. Avoid using extension cords if possible.
Operating Instructions
The Sealy Electric Blanket features dual digital controllers, allowing independent temperature adjustment for each side of the bed. Each controller offers 10 heat settings and an adjustable auto-shutoff timer.
- Power On/Off: Press the red power button on the controller to turn the blanket on or off.
- Adjust Heat Setting: Use the '+' and '-' buttons under the 'HEAT' section to select your desired heat level from 1 to 10. (Temperature range: 87-126°F).
- Set Auto Shutoff Timer: Use the '+' and '-' buttons under the 'TIME' section to set the auto shutoff duration from 1 to 12 hours. The blanket will automatically turn off after the selected time.
- Pre-Heat Function: The blanket features a pre-heat programmed setting and setting memory, which will revert to the last comfort level setting used within 15 minutes upon restart.
Video: Quick Look At How To Use The Sealy Heated Blanket
This video provides a quick demonstration on how to operate the Sealy Heated Blanket, including adjusting heat settings and using the timer function.
Maintenance
The Sealy Electric Blanket is machine washable for easy care. Follow these instructions carefully to ensure longevity and proper function:
- Disconnect: Always disconnect the controller(s) and power cable(s) from the blanket and the wall outlet before washing.
- Pre-Soak (Optional): For best results, you may pre-soak the blanket for 15 minutes in cool water with a small amount of mild detergent.
- Machine Wash: Wash on a delicate cycle with slow agitation and low spin speed using cool water. Do not use bleach.
- Rinse: Rinse thoroughly on a normal cycle.
- Gentle Dry: Tumble dry on low heat or air dry. Ensure the blanket is completely dry before reconnecting to power. Do not iron.
- Storage: Store the blanket loosely folded in a cool, dry place when not in use. Avoid tightly folding or placing heavy objects on it.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket not heating | Power cord not securely plugged in; Controller not connected properly; Auto shutoff activated. | Check all connections; Press power button to restart; Ensure power outlet is functional. |
| Controller display is off or flashing | Power interruption; Internal error. | Unplug from wall for 5 minutes, then plug back in. If problem persists, contact customer support. |
| Uneven heating | Blanket is bunched or folded; Internal wiring issue. | Ensure blanket is spread flat. If problem persists, discontinue use and contact customer support. |
Specifications
- Model Name: KTHB-QATVS-Q
- Size: Queen Size 84" x 90"
- Color: Light Grey
- Material: Sherpa & Flannel (100% Polyester)
- Heat Settings: 10 (87-126°F)
- Auto Shutoff: Adjustable 1-12 hours
- Control: Dual Digital Controller
- Safety Certifications: ETL & FCC Certified
- Care Instructions: Machine Washable
Warranty and Support
Sealy provides a limited warranty for this electric blanket against defects in materials and workmanship under normal use. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or contact Sealy customer service directly. Please have your model number (KTHB-QATVS-Q) and purchase information available when contacting support.
For further assistance, visit the official Sealy website or contact their customer support line.