Introduction
Thank you for choosing the WallarGe Dual Wireless Headphones. This system provides a high-quality audio experience for TV watching, featuring both RF (Radio Frequency) and Bluetooth 5.3 connectivity. Designed for comfort and convenience, these headphones allow you to enjoy your favorite shows, movies, or music without disturbing others, with an extended range and no lip-sync delay. This manual will guide you through the setup, operation, and maintenance of your new headphones.
Image: The WallarGe Dual Wireless Headphones resting on their charging stand, which also functions as the RF transmitter. The stand features an illuminated central column and charging indicators.
What's in the Box
Please check the package contents to ensure all items are present:
- Wireless Headphones (2 units)
- RF Transmitter / Charging Station (1 unit)
- RCA Audio Cable (1 unit)
- AUX 3.5mm Audio Cable (1 unit)
- Optical Audio Cable (1 unit)
- AC Power Adapter (1 unit)
- User Manual (This document)
Setup Guide
Follow these steps to set up your WallarGe Dual Wireless Headphones and transmitter.
1. Powering the Transmitter
- Connect the AC Power Adapter to the "DC IN" port on the back of the RF Transmitter / Charging Station.
- Plug the AC Power Adapter into a standard wall outlet. The Power/Signal indicator on the transmitter will light up.
Image: A diagram showing the RF transmitter connected to a wall outlet via the AC power adapter.
2. Connecting to Your TV/Audio Source
The transmitter supports multiple audio input options. Choose the one compatible with your TV or audio device.
Image: A visual representation of the various audio output ports on a TV (Optical, RCA, AUX 3.5mm) and the corresponding cables, indicating wide compatibility for the WallarGe headphones.
- Optical (Recommended for Digital Audio):
Connect one end of the Optical Audio Cable to the "OPTICAL IN" port on the transmitter and the other end to the "Optical Audio Out" (or "Digital Audio Out") port on your TV.
- RCA (Red/White Audio):
Connect the RCA Audio Cable to the "AUDIO IN (R/L)" ports on the transmitter (Red to Red, White to White) and the other end to the corresponding "Audio Out" (Red/White) ports on your TV.
- AUX 3.5mm:
Connect the AUX 3.5mm Audio Cable to the "AUX IN" port on the transmitter and the other end to the 3.5mm headphone jack or audio out port on your TV or audio device.
Image: A close-up view of the transmitter's audio input ports (Optical, RCA, AUX) and the corresponding cables, illustrating how to connect them to a TV.
3. Adjusting TV Audio Settings (Important for Optical/Digital Connections)
For optimal performance, especially when using the Optical connection, you may need to adjust your TV's audio output settings. Navigate to your TV's audio settings menu and ensure the Digital Audio Output Format is set to PCM or Stereo. Avoid settings like Bitstream, Dolby Digital, or DTS, as these are not compatible with the transmitter.
Image: A screenshot of a TV's audio settings menu, highlighting the "Digital Output Audio Format" option set to "PCM", which is the recommended setting for the headphones.
4. Initial Headphone Pairing (RF Mode)
The headphones are pre-paired with the transmitter at the factory. Simply turn on the headphones by sliding the "ON/OFF" switch to "ON". The "SIGNAL" indicator on the headphones should light up, indicating a successful connection to the transmitter. If not, ensure the transmitter is powered on and connected to an audio source.
Operating Instructions
Headphone Controls
Image: A detailed view of the controls located on the right earcup of the WallarGe headphone, showing the power switch, volume buttons, and the TV/Bluetooth mode selector switch.
- Power Switch (ON/OFF): Slide to turn the headphones on or off.
- Volume Buttons (+/-): Press to increase or decrease the audio volume.
- Mode Switch (TV/BT): Toggle between RF (TV) mode and Bluetooth (BT) mode.
Using in RF (TV) Mode
Ensure the transmitter is connected to your TV and powered on. Slide the mode switch on the headphones to the "TV" position. The headphones will automatically connect to the transmitter, allowing you to hear your TV's audio. The RF connection provides a stable signal with no lip-sync delay and an extended range of up to 100 feet (30 meters), even through walls.
Image: A collage showing a man enjoying audio from his TV via the WallarGe headphones while performing various activities around the house, such as doing laundry, cooking, and lounging, illustrating the 100-foot wireless range.
Image: Two individuals wearing WallarGe headphones while watching television, with an inset showing the headphone's mode switch set to "TV" mode.
Using in Bluetooth (BT) Mode
To use the headphones with a Bluetooth-enabled device (e.g., smartphone, tablet, laptop), slide the mode switch on the headphones to the "BT" position. The headphones will enter pairing mode.
- On your Bluetooth device, go to its Bluetooth settings and enable Bluetooth.
- Search for available devices. You should see "HP005" (or similar) in the list.
- Select "HP005" to connect. Once connected, the Bluetooth indicator on the headphones will stop flashing and remain solid.
Note: Each headphone pairs independently via Bluetooth. If you have two headphones, each can connect to a separate Bluetooth device.
Image: A WallarGe headphone next to a smartphone displaying its Bluetooth settings, showing "HP005" as a connected device, illustrating the Bluetooth 5.3 pairing process.
Image: Two individuals using WallarGe headphones with personal devices (a smartphone and a laptop), with an inset showing the headphone's mode switch set to "BT" mode.
Charging the Headphones
Place the headphones on the charging stand (transmitter). Ensure the charging contacts on the headphones align with the pins on the stand. The charging indicator light on the stand will show the charging status. A full charge provides up to 25 hours of playtime.
Image: The WallarGe Dual Wireless Headphones on their charging stand, with text indicating "Long Playtime" and "25Hrs Allows You to Watch and Listen for Extended Periods of Time".
RGB Stand Button
The charging stand features an RGB button that allows you to cycle through various neon light colors, adding an aesthetic touch to your setup. Press the "RGB Stand Button" on the base of the transmitter to change the light color.
Image: The WallarGe charging stand with headphones, highlighting the "RGB Stand Button" and showing various color options for the stand's illumination.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the headphones and transmitter. Do not use liquid cleaners or aerosols.
- Storage: When not in use, store the headphones on the charging stand to keep them charged and ready. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the headphones frequently. Charge them regularly.
- Ergonomic Design: The headphones feature a scientific D-shaped earcups and adjustable headband for supreme comfort during extended use.
Image: A close-up view of the WallarGe headphone's D-shaped earcup, emphasizing its ergonomic design for comfortable wear.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound in RF (TV) mode. |
|
|
| No sound in Bluetooth mode. |
|
|
| Audio crackling or static. |
|
|
| Headphones not charging. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Name | Headphones (HP005) |
| Connectivity Technology | Wireless, RF, Bluetooth |
| Wireless Communication Technology | Bluetooth 5.3, RF (2.4GHz) |
| Included Components | Wireless Headphones*2, 3 Audio Cables (RCA, AUX, OPT), Charging Station, AC Adapter, User Manual |
| Compatible Devices | Television, Cellphones, Desktops, Laptops, Tablets, Telephones, Bluetooth Devices |
| Control Type | Button Control (Push Button) |
| Frequency Range | 20 Hz - 20,000 Hz |
| Number of Items | 2 (Headphones) |
| Audio Driver Type | Dynamic Driver |
| Bluetooth Range | Up to 30 meters (100 feet) |
| Earpiece Shape | Over Ear (D-shaped earcups) |
| Special Features | Wireless, Adjustable & Soft Headband, Bluetooth, Volume Control, Rechargeable Battery, Plug and Play, Neon Lights Stand |
| Item Weight | 3.52 pounds (total package) |
| Batteries | 2 Lithium Ion batteries (included) |
| Color | Black |
Warranty and Support
For warranty information and technical support, please refer to the contact details provided on the product packaging or visit the official WallarGe website.
You can also visit the WallarGe Store on Amazon for more information and product updates: WallarGe Amazon Store.
