HOIGY Faucet Supply Lines and Waterfall Faucet User Manual

1. Introduction

Thank you for choosing the HOIGY Faucet Supply Lines and Waterfall Bathroom Sink Faucet. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new plumbing fixtures. Please read this manual thoroughly before installation and retain it for future reference.

Image: The complete HOIGY Waterfall Bathroom Sink Faucet set, including the main faucet body, two handles, a drain stopper, and two braided stainless steel supply lines.

2. Safety Information

• Always turn off the main water supply before beginning any plumbing work.
• Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
• Ensure all connections are secure and leak-free before restoring water pressure.
• If you are unsure about any step, consult a qualified plumber.
• Avoid overtightening connections, which can damage threads or components.

3. Package Contents

Please verify that all components are present before beginning installation:

• Waterfall Bathroom Sink Faucet (Main Body)
• Two (2) Faucet Handles
• Two (2) 30-inch Faucet Supply Lines (3/8" Female Compression x M10 Male Connector)
• Two (2) 1/2" Adapters with Rubber Gaskets
• Drain Stopper (Black)
• Mounting Hardware (Plastic Nut, Washers)

Image: A pair of 30-inch braided stainless steel faucet supply lines with 3/8" female compression fittings and M10 male connectors, alongside two 1/2" adapters.

Image: Close-up view of the 30-inch supply line, highlighting the 3/8" Female Compression fitting and the M10 Male Connector, confirming cUPC certification and US standard thread.

4. Setup and Installation

This faucet and supply line set is designed for easy installation, typically within 10 minutes, without the need for professional plumbers or specialized tools. Ensure your sink meets the following requirements:

• Three Holes: Compatible with 3-hole sinks (4-10 inches spread).
• Sink Hole Diameter: 1.1-1.5 inches.
• Sink Thickness: 0.1-1.9 inches.

Image: A detailed diagram illustrating the 4-step installation process for the HOIGY faucet, including sink hole and thickness requirements.

Installation Steps:

1. Insert the Faucet: Place the main faucet body and handles into the corresponding holes on your sink deck. Ensure they are properly aligned.
2. Screw the Plastic Nut: From underneath the sink, secure the faucet and handles by screwing on the plastic nuts provided. Hand-tighten initially, then use a wrench for a snug fit, but do not overtighten.
3. Connect the Snap-on Connector: Attach the snap-on connector of the supply lines to the faucet's inlets. Ensure a secure, leak-free connection.
4. Connect the Angle Valves: Connect the other end of the supply lines to your hot and cold water angle valves. The 3/8" female compression thread connects directly. If your angle valves are 1/2", use the provided 1/2" adapters with their matching rubber gaskets for a secure fit.

Image: Illustration showing how to easily tighten the nut during installation and highlighting the inclusion of extra 1/2" adapters with rubber gaskets for versatile connection.

Image: Cross-section view of the HOIGY supply hose, demonstrating its PEX inner tube and braided stainless steel outer layer for leak-proof and durable performance.

5. Operating Instructions

The HOIGY Waterfall Bathroom Sink Faucet features two lever handles for controlling hot and cold water flow. Turn the handles to adjust the water temperature and flow rate. The faucet is designed to provide a silent, laminar stream without splashing, thanks to its exclusive 3-layer metal filter and pressure reducer.

Image: The HOIGY faucet in operation, demonstrating its silent waterfall and laminar stream, achieved by a 3-layer metal filter and pressure reducer.

6. Maintenance

• Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Check for Leaks: Periodically inspect all connections for any signs of leaks. Tighten connections if necessary, but do not overtighten.
• Filter Maintenance: The 3/8" connector features a built-in filter to remove impurities. If water flow decreases, the filter may need cleaning. Turn off the water supply, disconnect the supply line, and clean the filter screen.

7. Troubleshooting

Image: Diagram illustrating the leak-prevention features of the HOIGY faucet, including the snap-on connector, fitted water hoses, and ceramic valve for excellent sealing.

8. Specifications

9. Warranty and Support

For any questions, concerns, or technical assistance regarding your HOIGY Faucet Supply Lines and Waterfall Bathroom Sink Faucet, please contact HOIGY customer support. Refer to your purchase documentation for specific warranty details or visit the official HOIGY store on Amazon.

HOIGY Store: https://www.amazon.com/stores/HOIGY/page/6340FAAA-DADD-49BD-805E-20304D0FFE6A