MVMT Blacktop 47 MM Men's Analog Watch Instruction Manual

Introduction

Thank you for choosing the MVMT Blacktop 47 MM Men's Analog Watch. This manual provides detailed instructions for the proper setup, operation, and maintenance of your timepiece. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.

Product Overview

Figure 1: Front view of the MVMT Blacktop watch.

The MVMT Blacktop watch features a 47mm case, a battery-powered 5-hand Miyota movement, and a chronograph function. It includes a 60-minute timer and running seconds subdials. The watch is designed with a domed hardened mineral crystal for enhanced durability and is water-resistant up to 10 ATM/100 meters.

Setup Instructions

1. Setting the Time

1. Pull the crown (located on the right side of the watch case) out to position 2.
2. Turn the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
3. Push the crown back into position 1 to start the watch.

2. Setting the Date

1. Pull the crown out to position 1 (first click).
2. Turn the crown clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this may interfere with the automatic date change mechanism.
3. Push the crown back into its original position.

3. Adjusting the Bracelet

The metal bracelet can be adjusted for a comfortable fit. It is recommended to have a professional jeweler adjust the links to prevent damage to the watch or bracelet.

Operating Instructions

Chronograph Function

The chronograph allows for precise timing of events. It features a 60-minute timer and running seconds subdials.

1. Start: Press the top pusher (A) to start the chronograph. The large second hand will begin to move, along with the minute and hour subdials.
2. Stop: Press the top pusher (A) again to stop the chronograph. The elapsed time will be displayed.
3. Reset: After stopping the chronograph, press the bottom pusher (B) to reset all chronograph hands to their zero positions. The chronograph must be stopped before it can be reset.

Figure 2: MVMT Blacktop watch on wrist, illustrating its appearance during use.

Maintenance

Water Resistance

Your MVMT Blacktop watch is water-resistant up to 10 ATM (100 meters). This means it is suitable for everyday use, including splashes, rain, and showering. However, it is not recommended for swimming, diving, or prolonged submersion in water. Always ensure the crown is fully pushed in before any contact with water.

Cleaning

To clean your watch, wipe the case and crystal with a soft, damp cloth. For the metal bracelet, a soft brush with mild soap and water can be used, followed by thorough rinsing and drying. Avoid using harsh chemicals or abrasive materials.

Battery Replacement

The watch is powered by a Lithium Ion battery. When the watch stops running, it indicates the battery needs replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

Figure 3: Detail of the watch clasp.

Troubleshooting

• Watch not running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
• Chronograph hands not resetting to zero: If the chronograph hands do not return to their 12 o'clock position after resetting, consult a professional watch technician for adjustment.
• Condensation under the crystal: This may indicate a loss of water resistance. Avoid further contact with water and have the watch inspected by a professional immediately.

Specifications

Figure 4: MVMT Blacktop watch on a dark background.

Warranty and Support

MVMT offers a two-year guarantee on this watch. This guarantee covers manufacturing defects under normal use. For warranty claims or support inquiries, please refer to the official MVMT website or contact their customer service.

Figure 5: MVMT product packaging.