Introduction
This manual provides essential information for the Marvel Legends Maximum Series Hulk action figure. Designed for collectors and enthusiasts, this figure brings the iconic Hulk character from Marvel Comics to life with incredible detail and extensive articulation. Standing at a substantial 8.5 inches (21.5 cm), it is scaled to tower over standard 6-inch Marvel Legends figures, making it a prominent piece in any collection. The figure includes a variety of accessories to enhance display and play.
Safety Information
Please read all safety warnings before handling the product.
- Warning: Choking Hazard – Small parts may be generated. Not for children under 3 years.
- This product is recommended for ages 14 years and up.
What's in the Box
Your Marvel Legends Maximum Series Hulk action figure package includes the following components:
- One (1) Marvel Legends Maximum Series Hulk Action Figure
- Eleven (11) accessories, including:
- Two (2) alternate raging heads
- Two (2) grapple hands
- Two (2) open palm hands
- Three (3) thunderclap effects
- One (1) missile accessory (designed to appear ripped apart)
Image: The Hulk figure displayed with all its accessories, including alternate heads, hands, thunderclap effects, and the missile.
Setup and Assembly
The Marvel Legends Maximum Series Hulk figure comes largely pre-assembled. Initial setup primarily involves attaching the desired head and hand accessories.
- Unboxing: Carefully remove the figure and all accessories from the packaging. Retain packaging for future storage if desired.
- Attaching Heads: Select one of the alternate heads. Align the neck peg on the figure with the hole in the head and gently push until it is securely seated. To change heads, gently pull the current head off the peg.
- Attaching Hands: Choose the desired pair of hands (grapple or open palm). Align the wrist peg on the figure's arm with the hole in the hand and gently push until it is securely seated. To change hands, gently pull the current hand off the peg.
- Accessory Placement: The thunderclap effects can be placed over the open palm hands to simulate a powerful impact. The missile accessory can be held by the figure to recreate dynamic action scenes.
Image: The Hulk figure demonstrating the use of the missile accessory, posed in an action stance.
Operating and Articulation
The Marvel Legends Maximum Series Hulk figure boasts extensive articulation, allowing for a wide range of dynamic poses. Understanding its articulation points will help you maximize its display potential.
- Articulation Points: The figure features approximately 30 points of articulation, including:
- Poseable head (ball joint)
- Shoulders (ball joint with butterfly articulation)
- Biceps swivel
- Double-jointed elbows
- Wrist swivel and hinge
- Abdominal crunch
- Waist swivel
- Hips (ball joint)
- Thigh swivel
- Double-jointed knees
- Ankle pivot and hinge
- Toe articulation
- Soft Skin Upper Torso: The figure incorporates a soft skin upper torso cover, which facilitates broad shoulder movement and allows for more natural posing.
- Posing: Gently manipulate the joints to achieve desired poses. Avoid excessive force to prevent damage. The figure's large size and sturdy construction are designed to hold poses effectively.
Image: The Hulk figure in a powerful, dynamic pose, showcasing its extensive articulation.
Image: Rear view of the Hulk figure, illustrating the articulation in the back and legs.
Maintenance
Proper care will ensure the longevity and appearance of your Marvel Legends Maximum Series Hulk figure.
- Cleaning: Dust the figure regularly with a soft, dry cloth or a soft-bristled brush. For stubborn dirt, lightly dampen a cloth with water and gently wipe the surface. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation.
- Handling: Always handle the figure by its main body. Avoid pulling or twisting small parts or accessories with excessive force.
- Joint Care: If joints become stiff, gently warm the area with a hairdryer on a low setting for a few seconds to loosen the plastic before attempting to move the joint. If joints become loose, a small amount of clear nail polish or a specialized joint tightener can be applied to the peg and allowed to dry to increase friction.
Troubleshooting
Here are solutions to common issues you might encounter with your action figure:
| Problem | Solution |
|---|---|
| Joints are too stiff to move. | Gently apply heat to the joint using a hairdryer on a low setting for 5-10 seconds. This will soften the plastic, allowing for easier movement. Be cautious not to overheat. |
| Joints are too loose and cannot hold a pose. | Carefully remove the limb or part. Apply a thin layer of clear nail polish or a specialized joint tightener to the peg. Allow it to dry completely before reattaching. This will add friction. |
| Accessories do not fit securely. | Ensure proper alignment of pegs and holes. If still loose, a very small amount of adhesive putty (non-permanent) can be used for display purposes. If too tight, gently widen the hole with a small, blunt tool or apply minimal heat. |
| Figure falls over easily. | Adjust the ankle and knee articulation to find a stable center of gravity. Ensure the figure is on a flat, stable surface. Consider using a display stand (not included) for more dynamic or precarious poses. |
Specifications
Detailed specifications for the Marvel Legends Maximum Series Hulk figure:
- Product Dimensions: 10 x 2.75 x 10 inches (25.4 x 6.98 x 25.4 cm)
- Item Weight: 5.3 ounces (150.25 grams)
- ASIN: B0DJCHDN93
- Item Model Number: G0596
- Manufacturer Recommended Age: 14 years and up
- Release Date: May 24, 2025
- Manufacturer: Hasbro
- Articulation: Approximately 30 points of articulation
- Scale: Designed to tower over 6-inch scale Marvel Legends figures
Warranty and Support
For information regarding product warranty, returns, or technical support, please contact Hasbro customer service directly.
- Manufacturer: Hasbro
- Website: Hasbro Consumer Care
- Please have your model number (G0596) and purchase details ready when contacting support.