Product Overview
The Paul Anthony Pro Series 1 compact shaver for men is designed for convenient grooming, especially during travel or camping. It features a single floating titanium blade for a clean and smooth shave, with an aluminum head to protect the skin. The shaver is powered by a rechargeable lithium battery, which fully charges in 90 minutes via any USB power source. A quick 5-minute charge provides 10 minutes of use. Its compact design and sleek metallic finish make it ideal for portability.
Image: The Paul Anthony Pro Series 1 H5002 Mobile Shaver, shown in its retail packaging, emphasizing its compact design, long run time, and USB-C charging capability.
Safety Information
- Read all instructions before use.
- Keep the appliance dry. This shaver is designed for dry use only. Do not use it in the shower or bath.
- Do not immerse the shaver in water or any other liquid.
- Keep out of reach of children.
- Do not use if the foil or blade is damaged, as this may cause injury.
- Only use the provided USB charging cable. An USB power adapter is not included.
- Do not attempt to disassemble or repair the shaver yourself. Contact customer support for assistance.
- Avoid extreme temperatures. Do not expose the shaver to direct sunlight or high heat.
Package Contents
Please check the box for the following items:
- 1 x Paul Anthony Pro Series 1 Compact Shaver for Men
- 1 x Instruction Manual
- 1 x Cleaning Brush
- 1 x USB Charging Cable
Note: A USB power adapter is not supplied.
Setup
Charging the Shaver
- Ensure the shaver is turned off.
- Connect the small end of the provided USB charging cable to the charging port on the shaver.
- Connect the other end of the USB cable to any standard USB power source (e.g., computer USB port, USB wall adapter, power bank).
- The charging indicator light will illuminate to show that the shaver is charging.
- A full charge takes approximately 90 minutes. The indicator light may change or turn off when fully charged (refer to the specific behavior described in the full manual if available).
Image: Rear view of the shaver, highlighting the USB charging port for easy power connection.
Note: A 5-minute quick charge provides approximately 10 minutes of shaving time.
Operating Instructions
Before Shaving
- Ensure your face is clean and dry. This shaver is designed for dry use.
- For best results, shave before washing your face.
How to Shave
- Remove the protective cap from the shaver head.
- Press the power button to turn on the shaver.
- Hold the shaver at a right angle (90 degrees) to your skin.
- Gently stretch your skin with your free hand.
- Move the shaver in short, circular motions or straight strokes against the direction of hair growth.
- Apply light pressure. Do not press too hard, as this can irritate the skin or damage the foil.
- After shaving, press the power button again to turn off the shaver.
- Replace the protective cap to protect the foil.
Image: The shaver with its protective cap removed, revealing the precision foil head ready for use.
Maintenance
Regular cleaning ensures optimal performance and extends the life of your shaver.
Cleaning After Each Use
- Turn off the shaver and disconnect it from any power source.
- Remove the shaver head assembly (foil and cutter block). Refer to the full manual for specific removal instructions if needed.
- Use the provided cleaning brush to brush away any accumulated hair from the foil and the cutter block.
- Do not use water to clean the foil or cutter block, as this shaver is for dry use only.
- Reattach the shaver head assembly securely.
- Replace the protective cap.
Storage
- Store the shaver in a cool, dry place.
- Always ensure the protective cap is on when storing or traveling to prevent damage to the foil.
Image: The shaver with its cap removed, illustrating the foil head and the power button, ready for cleaning or use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shaver does not turn on. | Battery is depleted. | Charge the shaver for at least 90 minutes. |
| Shaver does not shave effectively. | Foil or blade is clogged with hair. | Clean the shaver head and cutter block thoroughly with the cleaning brush. |
| Shaver pulls hair or causes irritation. | Foil or blade may be damaged or worn. | Inspect the foil and blade for damage. If damaged, replacement parts may be needed, or contact customer support. Ensure skin is dry. |
| Charging indicator light not working. | Cable not properly connected or power source issue. | Ensure USB cable is securely connected to both shaver and power source. Try a different USB port or adapter. |
Specifications
- Model: H5002
- Brand: Paul Anthony
- Power Source: Battery Powered (Lithium-ion)
- Battery Life: Up to 90 minutes continuous use
- Full Charge Time: Approximately 90 minutes
- Quick Charge: 5 minutes for 10 minutes use
- Blade Material: Titanium Steel
- Head Type: Foil
- Number of Blades: 1 (Single Action Floating Blade)
- Cutting Length: 0.4 mm
- Color: Brushed Steel
- Dimensions: 12.2 x 9.5 x 3.2 cm (Package Dimensions)
- Weight: 170 grams (Package Weight)
- Recommended Use: Face
Warranty and Support
The Paul Anthony Pro Series 1 H5002 Mobile Shaver comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact Paul Anthony customer service. Contact details can typically be found on the product packaging or the official Paul Anthony website.
Please visit the official Paul Anthony website for the most up-to-date support information and contact methods.