Genérico Digital Smart Piggy Bank

1. Introduction

Thank you for choosing the Genérico Digital Smart Piggy Bank, Model MTC-208. This device is designed to provide a secure and interactive way to save money, featuring an automatic note feeder, a coin slot, and a customizable electronic password. This manual provides essential information for the proper setup, operation, and maintenance of your piggy bank.

2. Safety Information

• This product is not a toy for children under 3 years old due to small parts. Adult supervision is recommended.
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• Remove batteries if the product is not used for an extended period to prevent leakage.
• Keep the device away from water and excessive moisture.
• Do not attempt to disassemble or modify the device, as this may void the warranty and cause damage.

3. Package Contents

• 1x Genérico Digital Smart Piggy Bank (Model MTC-208)
• 1x Sheet of Decorative Stickers

4. Product Overview

Familiarize yourself with the main components of your digital piggy bank:

Image 1: Front view of the Genérico Digital Smart Piggy Bank, showing the automatic note feeder in use. The bank is blue with a red top and base, featuring cartoon animal designs and a numeric keypad.

Image 2: Labeled diagram illustrating the main features: coin deposit slot, note deposit slot, numeric keypad, and indicator lights.

• Automatic Note Feeder: Located at the front, automatically pulls banknotes into the safe.
• Coin Slot: Located on the top surface for depositing coins.
• Numeric Keypad: Used to enter the electronic password.
• Fingerprint Sensor Area: A touch-sensitive area that simulates a fingerprint scan for opening the safe after the correct password is entered.
• Indicator Lights: Provide visual feedback during operation.
• Battery Compartment: Located on the bottom (not visible in front view).

5. Setup

5.1 Battery Installation

1. Locate the battery compartment on the bottom of the piggy bank.
2. Using a screwdriver, open the battery compartment cover.
3. Insert 3 AA batteries (not included), ensuring correct polarity (+/-).
4. Close the battery compartment cover and secure it with the screw.

5.2 Initial Password Setup

The default password for the piggy bank is 0000.

1. Enter the default password (0000) on the numeric keypad.
2. The indicator light will turn green, and you will hear a confirmation sound.
3. Within 10 seconds, place your finger on the fingerprint sensor area to open the safe door.

6. Operation

6.1 Depositing Notes

Image 3: Detailed view of the note deposit slot and the coin slot on the top of the piggy bank.

Insert banknotes into the automatic note feeder slot at the front of the piggy bank. The mechanism will automatically pull the note inside.

6.2 Depositing Coins

Drop coins into the coin slot located on the top surface of the piggy bank.

6.3 Opening the Safe

1. Enter your 4-digit password on the numeric keypad.
2. If the password is correct, the indicator light will turn green, and you will hear a sound.
3. Within 10 seconds, place your finger on the fingerprint sensor area to unlock and open the safe door.

6.4 Changing the Password

Image 4: Interaction with the fingerprint sensor area, which also produces sound feedback.

To change the password:

1. Open the safe using your current password (default is 0000).
2. While the door is open, press and hold the * key.
3. Enter your new 4-digit password.
4. Press the # key to confirm and save the new password.
5. Close the safe door. Your new password is now set.

7. Maintenance

• Clean the exterior of the piggy bank with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the note feeder slot is free from obstructions.
• Replace batteries when the sound becomes weak or the device stops responding.

8. Troubleshooting

8.1 Cannot Open the Safe

• Incorrect Password: Ensure you are entering the correct 4-digit password. If you forgot your password, you will need to reset it by removing and reinserting the batteries, which will revert the password to the default (0000).
• Battery Low: Replace the batteries with new AA batteries.
• Door Not Fully Closed: Ensure the safe door is securely closed before attempting to open it.

8.2 Automatic Note Feeder Not Working

• Obstruction: Check the note feeder slot for any foreign objects or crumpled notes.
• Battery Low: Ensure batteries have sufficient power.

8.3 No Sound from Keypad

• Battery Low: Replace the batteries.

9. Specifications

10. Warranty and Support

This product is covered by the standard warranty provided by the seller at the point of purchase. For any issues, questions, or support needs, please contact the seller directly through your purchase platform. Please retain your proof of purchase for warranty claims.