KAIWEETS Two-Way Articulating Borescope Camera User Manual

Introduction

The KAIWEETS Two-Way Articulating Borescope Camera is an advanced industrial inspection tool designed for precise visual inspection in hard-to-reach areas. Featuring a flexible probe with a two-way articulating tip, a high-resolution display, and adjustable LED lighting, this borescope is ideal for automotive, aircraft, plumbing, and industrial applications. It allows users to capture detailed images and videos for diagnostic and documentation purposes.

Figure 1: The KAIWEETS Two-Way Articulating Borescope Camera, showing the main unit, flexible probe, various accessories (hook, magnet, side mirror, lens protector), USB-C cable, 32GB TF card, and portable carrying case.

Safety Information

• Always ensure the device is turned off before connecting or disconnecting any components.
• Do not expose the main unit to water or excessive moisture. The probe is IP67 waterproof, but the main display unit is not.
• Avoid bending the probe beyond its specified articulation limits to prevent damage.
• Keep the device and its accessories out of reach of children.
• Use only the provided charging cable and adapter to charge the device.
• Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
• Ensure the operating temperature is within the specified range (refer to specifications) to prevent overheating. The device has overheat protection and will stop working if temperatures exceed 80°C.

Package Contents

Verify that all items are present in the package:

• 1 x KBA01 Articulating Borescope (Main Unit with integrated probe)
• 1 x Hook attachment
• 1 x Magnet tip attachment
• 1 x Side mirror attachment
• 1 x Lens protector ring
• 1 x Type-C USB Cable
• 1 x 32GB TF Card (pre-installed or separate)
• 1 x Portable Storage Case
• 1 x User Manual

Figure 2: All components included in the KAIWEETS borescope package, neatly arranged with the main unit, flexible probe, various attachments, charging cable, and the portable carrying case.

Product Overview and Features

The KAIWEETS KBA0A borescope is engineered for high-precision inspection tasks, offering a range of features to enhance usability and diagnostic accuracy.

Key Features:

• Two-Way 210° Articulating Borescope: The probe tip can be articulated up to 210 degrees in two directions, allowing for flexible navigation and precise viewing angles in confined spaces.


Figure 3: The borescope probe demonstrating its 210-degree articulation capability, allowing it to navigate and inspect the interior of a curved pipe.

• High-Performance 8mm Snake Camera: Equipped with a 2.0MP camera and an 8mm micro-snake probe, it provides clear visuals with 4X digital zoom. The optimal focal distance is 2-15cm.
• Adjustable LED Lights: 8 high-brightness LED lights are integrated into the probe tip, with 4 adjustable brightness levels (OFF, 50%, 80%, 100%) to illuminate dark inspection areas effectively.

Figure 4: The borescope probe submerged in water, highlighting its IP67 waterproof rating and the four adjustable brightness settings for its integrated LED lights.
• 4.3'' IPS Display: The large 4.3-inch IPS display provides true-to-life color reproduction and clear images, powered by a second-generation high-performance CMOS sensor.


Figure 5: A close-up of the borescope's 4.3-inch IPS display, showcasing its 1920x1080P resolution and clear image quality when inspecting intricate mechanical components.

• IP67 Waterproof Rigid Gooseneck Probe: The durable metal gooseneck probe is rated IP67 for water and dust resistance, maintaining its shape for easy maneuvering in wet or oily conditions.


Figure 6: A technician using the borescope, demonstrating the rigid gooseneck probe's ability to hold its shape while being inserted into a wall for inspection.

• Versatile Accessories: Includes hook, magnet tip, side mirror, and lens protector for various inspection needs.
• Portable Case & Rechargeable Battery: Comes with a sturdy storage case for secure transport. The 2000mAh lithium battery provides up to 3.5 hours of continuous use.
• Data Transfer: Supports data transfer via USB-C and a 32GB TF card for saving images and videos.
• Overheat Protection: The device features an overheat protection system. If the temperature reaches ≥75°C, a warning will display on the screen. If it reaches ≥80°C, the device will automatically stop working for safety reasons.

Setup

1. Charging the Battery:

Before first use, fully charge the borescope. Connect the provided Type-C USB cable to the charging port on the main unit and the other end to a USB power adapter (not included) or a computer USB port. The charging indicator will show the charging status. A full charge typically takes approximately 3.5 hours.

2. Inserting the TF Card:

Locate the TF card slot on the side of the main unit. Insert the provided 32GB TF card into the slot until it clicks into place. Ensure the card is inserted in the correct orientation. This card is essential for saving photos and videos.

3. Attaching Accessories:

To attach the hook, magnet tip, or side mirror, carefully screw the desired accessory onto the threaded tip of the borescope probe. Ensure it is securely fastened. The lens protector ring can be placed over the lens for added protection during use.

Operating Instructions

1. Powering On/Off:

Press and hold the Power button () for a few seconds to turn the device on. The display will light up, showing the live feed from the camera. To turn off, press and hold the Power button again until the screen shuts down.

2. Adjusting Articulation:

Use the articulation control wheel on the handle to bend the probe tip. Rotate the wheel to articulate the tip up to 210 degrees in either direction. This allows you to navigate around obstacles and achieve optimal viewing angles.

3. Adjusting LED Brightness:

Press the Light button () repeatedly to cycle through the four brightness levels (OFF, 50%, 80%, 100%). Adjust the brightness according to the lighting conditions of your inspection area.

4. Zoom Function:

Press the Up arrow button () to activate the 4X digital zoom. Press it again to cycle through zoom levels (1X, 2X, 3X, 4X). Use the Down arrow button to decrease zoom or exit zoom mode.

5. Screen Flipping:

If the image on the screen is inverted or needs reorientation, press the Mode button (M) to flip the screen display. This is useful when the probe is in an awkward position.

6. Capturing Photos and Videos:

To take a photo, press the Photo/Video Capture button (red button on the handle). A camera icon will briefly appear on the screen to confirm the capture. To record a video, press and hold the Photo/Video Capture button for a few seconds. A recording indicator will appear on the screen. Press and hold again to stop recording. All captured media is saved to the inserted TF card.

Figure 7: The borescope display showing a live feed from inside a drain pipe, with an indicator that video recording is active, allowing for clear documentation of inspections.

7. Viewing Media:

To access saved photos and videos, navigate to the playback mode using the menu buttons. You can then browse through your media files directly on the device. Alternatively, remove the TF card and insert it into a computer's card reader, or connect the borescope to a computer using the USB-C cable to transfer files.

Figure 8: A collage illustrating various practical applications of the KAIWEETS borescope, including inspecting an automotive engine, examining a wall cavity, checking plumbing, and using an attachment to retrieve a lost item from a drain.

Maintenance

• Cleaning the Probe: After each use, especially in dirty or oily environments, wipe the probe and camera lens with a soft, damp cloth. For stubborn grime, a mild detergent can be used, ensuring no liquid enters the main unit.
• Cleaning the Display: Use a soft, dry microfiber cloth to clean the display screen. Avoid abrasive materials or chemical cleaners that could damage the screen.
• Storage: Store the borescope and its accessories in the provided portable case when not in use. Keep it in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. If storing for an extended period, charge the battery to about 50% every few months.

Troubleshooting

Specifications

Warranty and Support

KAIWEETS products are designed and manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the product packaging or visit the official KAIWEETS website. Please retain your proof of purchase for warranty claims.