Pinelicorn Swinging Cafe Doors Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Pinelicorn Swinging Cafe Doors. Designed for modern office and living spaces, these partition doors combine aesthetics and functionality, aiming to create flexible and versatile private or public areas. Made of high-quality materials and exquisite craftsmanship, the swinging doors not only effectively divide space and enhance privacy but also add a touch of high-end atmosphere to your environment with their smooth operation and elegant design.

Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

Safety Information

Always exercise caution when handling and installing the doors. Ensure all components are securely fastened before use. Keep small parts away from children. If any part is damaged, do not proceed with installation and contact customer support.

Package Contents

Before beginning installation, verify that all components listed below are present and undamaged:

• 2 x Partition Doors
• Other Accessories for Assembly (Hinges, Screws, etc.)

Figure 1: Package Contents - Two door panels, hinges, and assembly accessories.

Specifications

Figure 2: Product Dimensions.

Setup and Installation

The Pinelicorn Cafe Doors are designed for easy installation. Follow these steps carefully:

1. Measure Your Opening: Before purchasing or installing, accurately measure your door opening. It is crucial to choose a door size that is closest to, but not wider than, your actual door opening width.
2. Prepare the Installation Area: Ensure the wall or door frame where the doors will be mounted is clean, dry, and structurally sound.
3. Attach Hinges to Doors: Secure the stainless steel hinges to the door panels using the provided screws. Ensure the hinges are aligned correctly for smooth operation. The double hinges on each side allow for bi-directional opening.
4. Mount Doors to Frame: Carefully position the door panels with attached hinges into your prepared opening. Mark the screw holes on the door frame or wall. Drill pilot holes if necessary, then secure the hinges to the frame using the remaining screws.
5. Test Operation: Once installed, gently open and close the doors in both directions to ensure they swing freely and self-close properly. Adjust hinge tightness if needed.

Figure 3: Installation examples and hinge detail.

Figure 4: Detail of hinges attached to door panels.

Operating Instructions

Your Pinelicorn Cafe Doors are designed for simple and flexible operation:

• Bi-directional Swing: The doors are equipped with special hinges that allow them to swing open in both directions (inward and outward). This provides high flexibility of use, making it easy to pass through.
• Self-Closing Feature: After being pushed open, the doors will automatically return to their closed position. This feature helps maintain privacy and separation between spaces.
• Smooth Operation: The high-quality hinges ensure a smooth and quiet swinging motion.

Figure 5: Doors in open position, demonstrating bi-directional swing.

Maintenance

To ensure the longevity and appearance of your cafe doors, follow these maintenance guidelines:

• Cleaning: Wipe the door surfaces with a soft, damp cloth. For stubborn marks, a mild, non-abrasive cleaner can be used. Avoid harsh chemicals or abrasive materials that could damage the finish.
• Hinge Care: Periodically check the hinges for any signs of looseness or wear. Tighten screws if necessary. If hinges become stiff, a small amount of silicone-based lubricant can be applied.
• Wood Care: As the doors are made of solid wood, avoid prolonged exposure to excessive moisture or direct sunlight, which can cause warping or fading.

Troubleshooting

If you encounter any issues with your cafe doors, refer to the following common problems and solutions:

• Doors do not close properly:
  • Check if the hinges are loose. Tighten all hinge screws.
  • Ensure the doors are level and plumb. Adjust mounting if necessary.
  • Verify that there are no obstructions preventing the doors from closing fully.
• Doors are stiff or squeak:
  • Apply a small amount of silicone lubricant to the hinge mechanisms.
  • Check for any debris or paint accumulation on the hinges that might impede movement.
• Missing parts upon arrival:
  • Carefully check all packaging materials. If parts are still missing, contact customer support immediately with your order details.

Warranty and Support

Pinelicorn is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase. For any product inquiries, technical support, or warranty claims, please contact Pinelicorn customer service through the retailer where you purchased the product.

For further assistance, you may visit the Pinelicorn Store on Amazon.