hofstein H3742679

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

hofstein Cardeira Floor Lamp Instruction Manual

Model: H3742679

1. Introduction

Thank you for choosing the hofstein Cardeira Floor Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lamp. Please read these instructions carefully before use and retain them for future reference.

2. Safety Instructions

Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

  • Ensure the power supply voltage matches the lamp's requirements (230V).
  • Do not connect the lamp to the power supply while it is still in its packaging.
  • Always disconnect the lamp from the power supply before cleaning, changing bulbs, or performing any maintenance.
  • This lamp is designed for indoor use only (IP20 rating). Do not expose it to moisture or extreme temperatures.
  • Do not exceed the maximum wattage specified for the bulbs (40W per bulb).
  • Keep the lamp away from flammable materials.
  • If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
  • This product is not dimmable. Do not attempt to use it with external dimming devices.

3. Package Contents

Please check that all components are present and undamaged. If any parts are missing or damaged, contact your retailer immediately.

  • 1 x hofstein Cardeira Floor Lamp (Model H3742679)
  • Instruction Manual

Note: Light bulbs are not included and must be purchased separately.

4. Setup

Follow these steps to set up your hofstein Cardeira Floor Lamp.

4.1 Unpacking

  1. Carefully remove all components from the packaging.
  2. Place the lamp on a flat, stable surface.

4.2 Bulb Installation

The lamp requires four E27 bulbs (max 40W each).

  1. Ensure the lamp is disconnected from the power supply.
  2. Gently unscrew the top part of the raffia shade to access the bulb sockets.
  3. Screw the E27 bulbs clockwise into the sockets until they are secure. Do not overtighten.
  4. Carefully reattach the top part of the raffia shade.
Close-up view of the top of the hofstein Cardeira floor lamp, showing the internal structure and bulb fitting area within the woven raffia shade.

Figure 1: Bulb installation area within the shade.

4.3 Placement

Place the floor lamp on a stable, level surface in your desired indoor location. Ensure the power cable can reach an electrical outlet without being stretched or obstructed.

hofstein Cardeira floor lamp placed in a modern living room setting next to a shelf and chair, demonstrating its size and aesthetic.

Figure 2: Lamp placement in an indoor environment.

5. Operating Instructions

The hofstein Cardeira Floor Lamp is operated via a foot switch.

  1. Plug the power cord into a suitable 230V electrical outlet.
  2. Locate the foot switch on the power cable.
  3. Press the foot switch to turn the lamp ON.
  4. Press the foot switch again to turn the lamp OFF.
Diagram showing the dimensions of the hofstein Cardeira floor lamp and a detailed close-up of the foot switch with 'on/off' label.

Figure 3: Lamp dimensions and foot switch detail.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your lamp.

6.1 Cleaning

  • Always disconnect the lamp from the power supply before cleaning.
  • Wipe the metal base with a soft, dry cloth.
  • For the raffia shade, use a soft brush or a dry cloth to gently remove dust. Do not use liquid cleaners, as they may damage the material.
  • Avoid abrasive cleaners or solvents.

6.2 Bulb Replacement

Refer to section 4.2 for instructions on how to replace the bulbs. Ensure you use E27 bulbs with a maximum wattage of 40W.

7. Troubleshooting

If you encounter issues with your lamp, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Lamp does not turn on.No power supply.Check if the power cord is securely plugged into a working outlet. Test the outlet with another device.
Lamp does not turn on.Faulty bulb(s).Replace the bulb(s) with new, working E27 bulbs (max 40W).
Lamp flickers.Loose bulb connection.Disconnect from power, then gently tighten the bulb(s) in their sockets.
Lamp flickers.Incompatible bulb type.Ensure you are using standard E27 bulbs. This lamp is not dimmable.

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

FeatureDetail
Brandhofstein
ModelCardeira (H3742679)
TypeFloor Lamp
Height109 cm
Diameter29 cm
Base Diameter29 cm
Cable Length185 cm
Lamp MaterialMetal (Black)
Shade MaterialWicker, Raffia (Natural colors)
Bulb SocketE27
Number of Bulbs4 (not included)
Max Wattage per Bulb40W
Power Supply230V
Switch TypeFoot Switch (On/Off)
Protection RatingIP20 (Indoor Use)
DimmableNo
StyleModern, Scandinavian

9. Warranty and Support

This product is covered by the standard warranty provided by hofstein. Please refer to your purchase documentation for specific warranty terms and conditions.

For technical support, spare parts, or warranty claims, please contact your retailer or hofstein customer service directly. Have your model number (H3742679) and proof of purchase ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.